This message is marked as Important.

Subject: Fixing 'Sword' fan speed controller Author: shogun (moderator) : member since March, 2004 : 12550 posts Posted on: 2005-07-25 12:54:38

Well after several weeks of having nothing but maximum blower speed available I decided it was time to investigate one of the common quirks of the E34/E32 series... the 'Sword' module. As the fans variable speed control would work very occasionally (even if only for a few seconds) I realised that it wasn't a case of blown Mosfet transistors but most likely a suspect solder joint, probably where the connector socket joins the PCB. Well a crook joint it turned out to be, but not the connector. It was a capacitor as marked.

It took a while to trace. I removed the sword module from the climate control box, but left it plugged in. By setting the fan controller about midway and flexing the PCB I could cause the fan to cut in and out. After re-soldering the connector joints I retested it but no joy. Still the same. Finally I pushed a prodded each component on the PCB until I narrowed it down to the said capacitor. The slightest touch to this triggered the intermittant operation. I resoldered the capacitor and VOILA! Sword fixed!!



Posted originally by pundit, Melbourne, Australia

shogun >>E32 750iL<< 11/88
7 series Tech tips
http://tinyurl.com/3486c

• Fixing 'Sword' fan speed controller (pic) - shogun 2005-07-25 12:54:38 (2950 views)
  • I can't view the pic (nt) - DavidC 2005-08-11 21:09:31 (360 views)
  • is my related problem same or different? - fredfloyd 2005-08-11 14:33:26 (405 views)