Subject: Re: good write up. a few questions: Author: dwightf : member since February, 2004 : 8088 posts Posted on: 2005-06-07 22:42:15

I got the Marine silicone at Boaters World, any marine shop will have it (and pick up a bottle of 303 Protection while your there). Any brand is fine, but get clear (not white).

I got my wires into the engine bay on the passenger’s side through what once was the hole for the fuse box vent. Since I installed a Cold Air Induction and I had to push that out and into the fender for it to get air, it left a hole I ran the wires into.

On the drivers side, there is a cap that looks like it is there for another intake (like on the 750’s). This just popped off and the turn signal/parking light wires not far behind it.

• Umnitza DDE/Angel Eye DIY Install (Long) (pic) - dwightf 2005-06-07 21:18:30 (18326 views)
  • FINALLY!! Thanks Dwight, great info!! (nt) - Ultymte 2005-06-09 13:50:23 (521 views)
  • Nice job. Thanks dwightf. (nt) - sealbeach740 2005-06-08 17:31:41 (433 views)
  • Thanks, and great job! (nt) - silber98 2005-06-08 09:09:19 (357 views)
  • Re: Umnitza DDE/Angel Eye DIY Install (Long) - bigbodybimmer 2005-06-08 02:15:53 (777 views)
  • Already added to e38.org. Good work! (nt) - DavidC 2005-06-08 00:35:49 (458 views)
  • good write up. a few questions: - zigor911 2005-06-07 21:36:39 (529 views)
    • Re: good write up. a few questions: - dwightf 2005-06-07 22:42:15 (647 views)
      • are all this accessholes are up front? (nt) - zigor911 2005-06-08 08:21:57 (526 views)