Subject: Okay here are some pics... Author: deltron : member since January, 2005 : 130 posts Posted on: 2005-03-13 21:04:35

Over all, I am happy with the colour and shine. However, the thing I am not happy about is the not so smooth finish (due to using a brush). I really don't want to go out and spend money or a siginificant amount of time sanding and reapplying a spray-on polyurethane.

Do you think wet-sanding the finish with a super fine grit paper will do the trick? If so, what grit do you recommend? I have 320 which is pretty fine.

I haven't finished the shifter piece (I had to redo it).




















1988 735iA

• Wood refinishing project - deltron 2005-03-07 12:29:06 (395 views)
  • Bought Clips from Dealer - Thomas Meacham 2005-03-09 07:55:50 (273 views)
  • Re: Wood refinishing project (pic) (url) - DavidC 2005-03-07 16:31:59 (493 views)
    • Sanding question (pic) - deltron 2005-03-08 04:06:26 (514 views)
      • I think you're on the right path. Just don't overdo the sanding - DavidC 2005-03-08 12:22:48 (296 views)
        • Re: I think you're on the right path. Just don't overdo the sanding - deltron 2005-03-08 14:21:11 (285 views)
          • I stopped sanding when reaching the natural wood color. - DavidC 2005-03-09 02:46:29 (269 views)
            • Re: I stopped sanding when reaching the natural wood color. - deltron 2005-03-10 12:06:12 (283 views)
              • You'll get better results with a wipe-on stain and a spray-on finish (nt) - DavidC 2005-03-10 12:38:34 (324 views)
            • Re: I stopped sanding when reaching the natural wood color. - deltron 2005-03-09 18:11:02 (265 views)
              • Okay here are some pics... (pic) - deltron 2005-03-13 21:04:35 (369 views)
                • Sanding will help, but I'd use 600 grit - DavidC 2005-03-13 21:23:07 (281 views)