Jim, I see you have posted a few times regarding the LCM. After 3 days of research I believe min is bad and after removing it from the car, I can see there is a "blown" transistor or resistor some kind of ...sistor (See Pic). I am not getting any messages on my Check Control on the dash and no codes to the computer per a local auto parts store scanner. Problem is I have only my Xeon low beam light on the front left, and nothing on the right rear of the car. If I had a compatible LCM with a different HW and SW number, and installed it, what would happed if I started the car with it? Woudl I damage the car or would I be able to reconnect the orignal and be OK. I guess I want to spend $100 to see if that is the issue before I spend $550 to replace it.
Picture of the POP

• Lamp Control Module - trevenarj 2007-11-20 07:11:04 (146 views)
  • Re: Lamp Control Module - jimcash 2007-11-20 11:20:22 (140 views)
    • Re: Lamp Control Module - trevenarj 2007-11-20 15:06:02 (114 views)
      • Re: Lamp Control Module (url) - bryanba 2008-07-02 11:02:49 (52 views)