If you have a Table Vise or you can buy from Lowes for under $25.00.
Mounts the vise on a good table or working bench.
Then place the Brake Bomb Unit upside down and tighten down on the vise.
Use a Plumper Chain Wrench(you can buy this and many others tools from Freight Harbor Tools) and wrap around the brake bomb and turn the wrench.
When you have it removed and about to install the new Brake Bomb.
Just don't forget to put Teflon Tape(2 to 3 turns) on the Brake Bomb's.

If you need more helpful tips, I have photos. I just don't know how to send or set up images.

I don't have internet at home.

My email address: atdlee@netzero.com

• Brake accumulator (bomb) removal? - Hitmanx 2008-04-30 18:19:19 (105 views)
  • Cold chisel and a BFH always has worked for me... - ejonesie22 2008-05-01 10:09:10 (76 views)
  • Re: Brake accumulator (bomb) removal? - stevebu 2008-04-30 20:58:19 (81 views)
    • Re: Brake accumulator (bomb) removal? - Hitmanx 2008-04-30 23:59:49 (77 views)
      • Since you already have the assembly out... - sixappeal 2008-05-01 00:16:29 (74 views)
        • Re: Since you already have the assembly out... - a735 2008-06-11 16:28:04 (33 views)
        • Re: Since you already have the assembly out... - Hitmanx 2008-05-01 01:09:00 (75 views)
      • Don't use heat. Big channel locks work. Do you know it's bad? (nt) - Roy In GA 2008-05-01 00:10:20 (74 views)