If the video cabling is not fitted to your car, then you need to fit an RCA cable from whereever your video source will be to the TV tuner.

At the TV tuner, you wire the video cable to the white plug as follows:

Pin 6 = video signal
Pin 15 = video shield

Pin 4 = audio signal
Pin 5 = audio shield

Audio is only mono, so if you are connecting stereo audio, just connect left and right together

Of course, you will need some connector pins. Steal some from an old connector or from an unused connector, or buy new ones from BMW.

• INSTALLING VIDEO MODULE on E38 ...HELP - clgrant 2008-05-12 20:39:28 (147 views)
  • Video ipod is easy - kiwijochen 2008-05-13 14:35:44 (139 views)
    • Is there a way to connect the mini-USB to feed video to VM? Thx. (nt) - bmw635 2008-05-25 03:08:07 (77 views)
  • YGM (nt) - Lyonsden1980 2008-05-13 06:26:28 (90 views)
  • I) You need the antenna amps and cables, they go in the C pillars. The TV will - Roy In GA 2008-05-13 00:08:17 (114 views)
    • Arent the amps already in the C-Pillars? I see some kinda amps there... (nt) - clgrant 2008-05-14 23:05:22 (81 views)
      • TV amps are different - kiwijochen 2008-05-15 00:58:46 (77 views)
        • Good Place to Buy Them? Part Numbers anyone? Thanks... (nt) - clgrant 2008-05-15 17:15:47 (78 views)
          • Ebay or Dealer. Item #4. E39 amps are OK also. You also need the leads (url) - Roy In GA 2008-05-15 23:11:33 (113 views)
            • Anyone have a picture from their car of what they look like in place? (nt) - clgrant 2008-05-17 17:01:21 (101 views)
              • Re: Anyone have a picture from their car of what they look like in place? - riboater 2008-05-24 23:35:44 (71 views)