Subject: Re: e38.org has a good writeup on this procedure Author: admiral : member since June, 2007 : 1 post Posted on: 2007-06-26 12:35:41

These instructions were flawless. The only problem I had was with the fuel filter I purchased at Autozone. The rubber sleeve of the replacement filter was a little bit too thick, that I had to use the old sleeve to make re-installation easy. Otherwise I would have had to replace the screw attaching the filter to the underbody.

• Changing fuel filter. Jack up front or back and it there anything i can screw up - mw717 2007-01-05 18:06:12 (739 views)
  • Make sure you pinch off engine side of filter hose to keep pressure in line. (nt) - zapperjoe 2007-01-05 23:37:55 (758 views)
  • e38.org has a good writeup on this procedure (pic) (url) - DavidC 2007-01-05 22:47:44 (9896 views)
    • Re: e38.org has a good writeup on this procedure - tomsmith 2007-09-17 21:06:28 (395 views)
      • Re: e38.org has a good writeup on this procedure - tomsmith 2007-09-17 21:06:49 (312 views)
    • Re: e38.org has a good writeup on this procedure - admiral 2007-06-26 12:35:41 (385 views)
    • wow. looks like cake! i will be trying it this weekend! thanks guys (nt) - mw717 2007-01-06 11:23:30 (467 views)
  • So there are extra sections of hose that need cut off? (nt) - mw717 2007-01-05 21:46:50 (493 views)
  • Using a floor jack. Comfortable with lifting front end, but not comf - mw717 2007-01-05 21:18:20 (503 views)
  • Are you using a floor jack or the tire changing jack? - pdef1949 2007-01-05 18:59:50 (554 views)
  • What I did on mine was to jack up the front - milan99740il 2007-01-05 18:11:12 (614 views)