-Charge port will have to be flipped and moved slightly forward. Also may have to be moved out 4mm.
-Sliver will have to be snapped in upside down so to speak because of the charge port location on it. Not sure how antena would be affected by this.
-Increase the hinge side of the phone bed by 4mm to allow for the decrease in the sliver's width.
-Increase holding tabs by 3mm to allow for the sliver's thinner profile.
-Cut, section and glue the adapter to allow for the sliver's 16mm increase in length over the razr.

Craig.

• Just Because..... V3 adapter ---->> V3xx adapter (pic) - renegade 2007-05-29 11:40:54 (430 views)
  • Re: Just Because..... V3 adapter ---->> V3xx adapter - watr4lyf 2007-11-15 20:31:35 (72 views)
  • Re: Just Because..... V3 adapter ---->> V3xx adapter - watr4lyf 2007-11-15 14:38:48 (84 views)
  • Well...do you think the Sliver could be adapted as well??? (nt) - shaunhaywood 2007-05-30 01:32:54 (228 views)
    • Possible. Initial thoughts - renegade 2007-05-30 12:01:49 (224 views)