here is all instration step HID RISMA model for Paparon.

1. put out your plug cap

2. make the hole by drill

3. a little bit smaller than rubber

4. cut the both cable connectors

5. first plug cap cable throu into the rubber inside of cap, and make a erectric safety protect connector

6. turn the rubber cap and plug in

7. complete the cabel work inside look

8. if you make a safety connector outside of cap, they are no longer cable for protecter

9. connect the bulb cable

10. wash the cover lens

11-13. make the clump for right side unit



14. right side unit slide into the wall

15. tightening screw holding unit

16-17. make the clump for left side unit


18. left side unit slide into the wall

19. tightening screw holding unit

20. finaly connecting all cable

• HID install operation for Paparon (for RISMA model) (pic) - Take 2007-05-12 10:34:31 (5500 views)
  • very fast, Take - and thanks (pic) - shogun 2007-05-12 11:55:49 (686 views)
    • Re: if you want to install more two unit - Take 2007-05-12 12:28:34 (257 views)
      • foglight looks yellowish (pic) - shogun 2007-05-12 12:38:44 (573 views)
        • ppics of old H1 lights before and after I cleaned reflectors (url) - shogun 2007-05-13 23:28:23 (429 views)
        • This reminds me of a question - amuso 2007-05-12 15:27:09 (201 views)
          • old fashion parking assistant (url) - shogun 2007-05-12 17:46:14 (293 views)
            • Ah, another mystery solved :) - amuso 2007-05-13 13:49:13 (194 views)