Subject: I like the box-end wrench solution. Very slick. Author: Oaktown735 : member since January, 2006 : 220 posts Posted on: 2007-01-20 17:45:19

I have a set of new seals in my parts drawer. Plan to install them as soon as our local cold-snap is over. Thanks again to all for the writeup and tips.

'92 735i 168K miles
Oakland, California

• Door handle seal removal and replacement (pic) (url) - davidc 2007-01-19 17:53:27 (7000 views)
  • I went crazy and painted the door handles while I was at it. (pic) - davidc 2007-01-20 02:06:50 (690 views)
  • Very helpful, David. One question. - Oaktown735 2007-01-19 20:04:30 (338 views)
    • A coathanger won't work. I used an allen wrench in a vice grip. (pic) - davidc 2007-01-20 01:48:21 (540 views)
    • coathanger is not strong enough, 13 mm wrench (pic) (url) - shogun 2007-01-19 22:15:10 (595 views)
      • Re: coathanger is not strong enough, 13 mm wrench - shadetree/pete 2007-01-21 14:37:39 (363 views)
      • I like the box-end wrench solution. Very slick. - Oaktown735 2007-01-20 17:45:19 (331 views)
      • I used a welding rod - Shayne 2007-01-19 22:56:12 (308 views)
        • I used $1 screwdriver tip bent 90 degrees. still have it!! (nt) - Paparon 2007-01-19 23:16:03 (357 views)