This message is marked as Important.

Subject: Fitting 16:9 monitor in RHD E38 Author: bugs1357 : member since April, 2006 : 919 posts Posted on: 2006-12-22 21:49:57

Others have managed to do this successfully. Here I have posted some photos of what I did.

The air con ducting fouls the left side of the tape housing on the Monitor. I put some cream onto the tape housing and here is a photo of where it touches the AC duct.


After cutting a hole in the duct and fitting the monitor and adjusting the hole many times here is what ended up working. A photo from the front showing how much depth into the duct is required for thr Tape housing.


From the inside of the monitor cavity showing the size of the cutout required. The hole straddles a seam in the duct where one piece joins another. The seam has got to go.


After duct taping over hole and leaving plenty of slack in the tape so it can form around the tape housing and into the duct, the fitted monitor. The frame is from an E39 so doesn't hide the screws behind perfectly but is good enough until I find one for an E38.


Hope this helps someone else.


Neil
E38 - June 1996 735iL (Oxford Green on Sand Beige), 164k km, Steptronic, TV (no Nav), GSM phone, digital A/C panel, new 5HP24 trans at 159k km, 16:9 monitor, 16:9 TV module.
E36 - Sep 1993 318i (Brilliant Red on Beige), sold to fund purchase of E38.

• Fitting 16:9 monitor in RHD E38 (pic) - bugs1357 2006-12-22 21:49:57 (810 views)
  • What did you do to play a DVD on your monitor? Complicated? Expensive? (nt) - Rick James 2006-12-24 21:07:56 (138 views)
    • That was a TV program not DVD - bugs1357 2006-12-26 03:32:04 (84 views)
    • Complicated? Not really. Just add the BMW TV tuner, then - sealbeach740 2006-12-25 01:21:25 (239 views)
  • Great job! - farnarkler 2006-12-23 00:14:05 (159 views)