Subject: more pics of disassembled part-ABS pump repair Author: shogun (moderator) : member since March, 2004 : 13203 posts Posted on: 2006-06-04 05:00:52

this is the offending pump


the cover is held on with #40 torx
this is the crappy foil harness that you need to remove all of the little bits of, suck or blow away the solder and get the little end pieces of the foil thing off of the pins
click
On the RHD version you can see were the ABS pump is located
that's where the pump is on our cars it just has a master cylinder hanging over top of it over here, the lines, plug and a couple 13mms should be all you need to remove, if you have something to plug the 2 lines coming from the master cylinder it won't piss fluid all over while you have the pump off but it's not requiered, you need to bleed the system and you need to clear the fault code.

shogun >>E32 750iL<< 11/88
7 series Tech tips
http://tinyurl.com/3486c

• for most e36 owners with abs problems (pic) - shogun 2006-05-23 00:17:29 (2057 views)
  • Re: for most e36 owners with abs problems - ezy ryder 2006-07-08 20:49:21 (798 views)
    • Re: for most e36 owners with abs problems - ezy ryder 2006-07-08 21:03:38 (578 views)
  • more pics of disassembled part-ABS pump repair (pic) (url) - shogun 2006-06-04 05:00:52 (908 views)
    • and a German translation - shogun 2006-06-04 05:05:27 (532 views)
  • Re: for most e36 owners with abs problems - mrpaul 2006-05-25 01:21:47 (754 views)
    • yes - shogun 2006-05-26 01:18:19 (652 views)
      • Thanks - mrpaul 2006-05-26 01:55:02 (611 views)