Some more info:
The pins 51 and 54 or 64 and 63 (dependant on the MOTRONIC part number as mentioned before) of the DME/ECU are connected to ground by the transmission control module only when the pressure for the clutch is in line with the pre-given values. ONLY then the engine gets full power from the ECU. This is a protection for the clutches of the trans gears to avoid unnecessary wear. Only when the gears are fully in operation, the RPM as well as the power from the engine can be transmitted to the transmission.
-----------------------------------------------------------

Hi Erich
Die Pins der DME 51 und 54 oder 64 und 63 bei DME 352 werden vom Getriebesteuergerlät auf Masse gezogen, wenn der Druck für die Kupplungen IO sind, erst dann kann die DME volle Leistung am Motor bringen. Das ist ein Schutz, für die einzelnen Kupplungen der Gänge damit die nicht unnötig verschleissen. Erst wenn die Gänge voll durchgeschaltet sind, darf die Drehzahl und Kraft an das Getriebe weiter gegeben werden.


Gruß Reinhard
-------------------------------------------------------------
As you have no automatic transmission now, this has to be 'bridged somehow, as I mentioned in the posting before. The ECU must get a signal so that it 'thinks/believes' the auto trans has fully engaged.

shogun >>E32 750iL<< 11/88
7 series Tech tips
http://tinyurl.com/3486c

• Manual gearbox on a M70B50... (pic) - henrike30 2006-05-19 06:24:47 (7391 views)
  • Man that is one helluva piece of work!!!! - animusgreen 2006-05-20 05:46:03 (385 views)
    • Re: Man that is one helluva piece of work!!!! - henrike30 2006-05-20 18:30:56 (301 views)
      • Re: Man that is one helluva piece of work!!!! - animusgreen 2006-05-21 21:31:52 (207 views)
  • U might contact Rob Levinson... - Logun 2006-05-19 22:00:39 (255 views)
    • read at the end, I already informed him what to do (nt) - shogun 2006-05-19 22:53:13 (223 views)
      • Whoops sorry 4 the double input then! Thread way 2 long 2 chk all (nt) - Logun 2006-05-20 17:35:48 (196 views)
  • Re: Manual gearbox on a M70B50... (pic) - htrdbmr 2006-05-19 15:49:49 (826 views)
    • Re: Manual gearbox on a M70B50... - henrike30 2006-05-19 18:59:59 (349 views)
      • my 10 mo. project (pic) - htrdbmr 2006-05-20 14:08:22 (514 views)
        • I LIKE IT!:) - henrike30 2006-05-20 18:26:57 (215 views)
        • Hey htrdbmr! Is that a custom oil pan? (nt) - bcweir 2006-05-20 15:20:23 (187 views)
  • Henrike, that is one awesome looking M70! And the car is hot too! - bcweir 2006-05-19 14:26:20 (244 views)
    • Didnt he use 850csi DMEs? (url) - mick 2006-05-19 14:53:11 (247 views)
      • no, -352 DME's I arranged for him from Germany (nt) - shogun 2006-05-19 21:51:22 (177 views)
  • can you get electronics from an S70? (nt) - plbowler 2006-05-19 07:39:45 (144 views)
    • Re: can you get electronics from an S70? - henrike30 2006-05-19 07:46:18 (198 views)
  • Thats insane... - mick 2006-05-19 07:29:11 (234 views)
    • Re: Thats insane... - henrike30 2006-05-19 07:42:16 (226 views)
      • Re: Thats insane... (url) - mick 2006-05-19 08:17:09 (208 views)
        • lets go the first step - hairywithit 2006-05-19 09:11:57 (165 views)
          • Re: lets go the first step - henrike30 2006-05-19 09:49:54 (207 views)
            • Re: lets go the first step - hairywithit 2006-05-19 10:01:31 (165 views)
              • Re: lets go the first step - henrike30 2006-05-19 10:09:49 (173 views)
                • Re: lets go the second step - hairywithit 2006-05-19 10:16:24 (148 views)
                  • Re: lets go the second step - henrike30 2006-05-19 10:23:56 (173 views)
            • Re: lets go the first step - henrike30 2006-05-19 10:01:20 (237 views)
        • Re: Thats insane... - henrike30 2006-05-19 08:34:41 (175 views)
  • WOW!!!! You have a speed machine on your hands now don't you. - chrisf 2006-05-19 07:03:19 (222 views)
    • ask the guys on the German E31 board - shogun 2006-05-19 10:26:06 (247 views)
      • the EGS signal is missing for the EML (url) - shogun 2006-05-19 10:57:40 (428 views)
        • Re: the EGS signal is missing for the EML - henrike30 2006-05-19 11:34:44 (243 views)
          • o.k., no problem, 2 persons have done the same (url) - shogun 2006-05-19 12:08:46 (278 views)
            • here is the solution/answer from Germany - shogun 2006-05-19 12:51:15 (386 views)
              • I forgot, the pins at the gear plug - shogun 2006-05-19 13:03:39 (216 views)
                • Fantastic! - henrike30 2006-05-19 18:46:21 (208 views)
                  • Fantastic! - shogun 2006-05-20 06:18:31 (220 views)
                    • Update! - henrike30 2006-05-20 18:06:24 (210 views)
                      • One more thing? - henrike30 2006-05-20 18:09:25 (210 views)
                        • FULL POWER!!!:) (pic) - henrike30 2006-05-21 13:29:25 (1047 views)
                          • Re: FULL POWER!!!:) - mustang196718 2006-05-21 16:30:31 (202 views)
                            • Re: FULL POWER!!!:) - henrike30 2006-05-22 04:51:02 (190 views)
                            • Glad that I could help - shogun 2006-05-21 21:32:39 (159 views)
                              • awesome looking car - hairywithit 2006-05-21 21:40:53 (139 views)
                                • Re: awesome looking car - henrike30 2006-05-22 04:54:48 (177 views)
                                  • the only race car with crusie control! LOL - hairywithit 2006-05-22 07:19:40 (155 views)
                                    • Re: the only race car with crusie control! LOL - henrike30 2006-05-22 07:54:42 (188 views)
                                      • C/C why not --- more power to you - hairywithit 2006-05-22 09:36:07 (139 views)
                                      • What kind of races are you driving? - shogun 2006-05-22 09:05:30 (159 views)
                                        • Re: What kind of races are you driving? - henrike30 2006-05-22 09:23:03 (217 views)