Hi Erich
Kannst ihm das mal durch geben:
DME 159 müssen die Pins 51 und 54 auf Masse gelegt werden.
DME 352 müssen die Pins 64 und 63 auf Masse gelegt werden.
Bei beiden Modellen sind es die Pins 24 und 25 am Getriebestecker, ausser es ist ein AGS-Getriebe! da sind es andere Pins, was aber als Vorfaselift nicht gab.
Hab mal beide aufgeschrieben, weil ich nicht weiß ob er Faselift vom Motor oder vom Modell meind, da ja ab ende 90 schon auf DME 352 umgestellt wurde.


Translation:

Hi Erich,

you can give him the following information.
In case of:
-DME/ECU -159:(that is the pre-facelift engine) pins 51 and 54 have to be connected to ground/earth

-DME/ECU 352 (the ts the facelift engine): pins 64 and 63 have to be connected to ground/earth.

UNLESS:
it is an AGS-transmission! There are different pins, but that was not available for pre-facelift engines.

I have noted down information for both M70 engine types, as I am not sure if he is talking about facelift engine or facelift model (all E32 M70), as from end of 1990 the DME/ECU -352 was used.

regards
Reinhard

shogun >>E32 750iL<< 11/88
7 series Tech tips
http://tinyurl.com/3486c

• Manual gearbox on a M70B50... (pic) - henrike30 2006-05-19 06:24:47 (7391 views)
  • Man that is one helluva piece of work!!!! - animusgreen 2006-05-20 05:46:03 (385 views)
    • Re: Man that is one helluva piece of work!!!! - henrike30 2006-05-20 18:30:56 (301 views)
      • Re: Man that is one helluva piece of work!!!! - animusgreen 2006-05-21 21:31:52 (207 views)
  • U might contact Rob Levinson... - Logun 2006-05-19 22:00:39 (255 views)
    • read at the end, I already informed him what to do (nt) - shogun 2006-05-19 22:53:13 (223 views)
      • Whoops sorry 4 the double input then! Thread way 2 long 2 chk all (nt) - Logun 2006-05-20 17:35:48 (196 views)
  • Re: Manual gearbox on a M70B50... (pic) - htrdbmr 2006-05-19 15:49:49 (826 views)
    • Re: Manual gearbox on a M70B50... - henrike30 2006-05-19 18:59:59 (349 views)
      • my 10 mo. project (pic) - htrdbmr 2006-05-20 14:08:22 (514 views)
        • I LIKE IT!:) - henrike30 2006-05-20 18:26:57 (215 views)
        • Hey htrdbmr! Is that a custom oil pan? (nt) - bcweir 2006-05-20 15:20:23 (188 views)
  • Henrike, that is one awesome looking M70! And the car is hot too! - bcweir 2006-05-19 14:26:20 (244 views)
    • Didnt he use 850csi DMEs? (url) - mick 2006-05-19 14:53:11 (247 views)
      • no, -352 DME's I arranged for him from Germany (nt) - shogun 2006-05-19 21:51:22 (177 views)
  • can you get electronics from an S70? (nt) - plbowler 2006-05-19 07:39:45 (145 views)
    • Re: can you get electronics from an S70? - henrike30 2006-05-19 07:46:18 (198 views)
  • Thats insane... - mick 2006-05-19 07:29:11 (234 views)
    • Re: Thats insane... - henrike30 2006-05-19 07:42:16 (226 views)
      • Re: Thats insane... (url) - mick 2006-05-19 08:17:09 (208 views)
        • lets go the first step - hairywithit 2006-05-19 09:11:57 (165 views)
          • Re: lets go the first step - henrike30 2006-05-19 09:49:54 (207 views)
            • Re: lets go the first step - hairywithit 2006-05-19 10:01:31 (165 views)
              • Re: lets go the first step - henrike30 2006-05-19 10:09:49 (173 views)
                • Re: lets go the second step - hairywithit 2006-05-19 10:16:24 (148 views)
                  • Re: lets go the second step - henrike30 2006-05-19 10:23:56 (173 views)
            • Re: lets go the first step - henrike30 2006-05-19 10:01:20 (238 views)
        • Re: Thats insane... - henrike30 2006-05-19 08:34:41 (175 views)
  • WOW!!!! You have a speed machine on your hands now don't you. - chrisf 2006-05-19 07:03:19 (222 views)
    • ask the guys on the German E31 board - shogun 2006-05-19 10:26:06 (247 views)
      • the EGS signal is missing for the EML (url) - shogun 2006-05-19 10:57:40 (428 views)
        • Re: the EGS signal is missing for the EML - henrike30 2006-05-19 11:34:44 (243 views)
          • o.k., no problem, 2 persons have done the same (url) - shogun 2006-05-19 12:08:46 (278 views)
            • here is the solution/answer from Germany - shogun 2006-05-19 12:51:15 (387 views)
              • I forgot, the pins at the gear plug - shogun 2006-05-19 13:03:39 (216 views)
                • Fantastic! - henrike30 2006-05-19 18:46:21 (209 views)
                  • Fantastic! - shogun 2006-05-20 06:18:31 (220 views)
                    • Update! - henrike30 2006-05-20 18:06:24 (210 views)
                      • One more thing? - henrike30 2006-05-20 18:09:25 (210 views)
                        • FULL POWER!!!:) (pic) - henrike30 2006-05-21 13:29:25 (1047 views)
                          • Re: FULL POWER!!!:) - mustang196718 2006-05-21 16:30:31 (202 views)
                            • Re: FULL POWER!!!:) - henrike30 2006-05-22 04:51:02 (190 views)
                            • Glad that I could help - shogun 2006-05-21 21:32:39 (159 views)
                              • awesome looking car - hairywithit 2006-05-21 21:40:53 (139 views)
                                • Re: awesome looking car - henrike30 2006-05-22 04:54:48 (177 views)
                                  • the only race car with crusie control! LOL - hairywithit 2006-05-22 07:19:40 (155 views)
                                    • Re: the only race car with crusie control! LOL - henrike30 2006-05-22 07:54:42 (188 views)
                                      • C/C why not --- more power to you - hairywithit 2006-05-22 09:36:07 (139 views)
                                      • What kind of races are you driving? - shogun 2006-05-22 09:05:30 (159 views)
                                        • Re: What kind of races are you driving? - henrike30 2006-05-22 09:23:03 (217 views)