you have 3 failed attempts of entering the radio CODE...you must leave the ignition in (position 1) and the radio on for at least 1 hour....then try again. If when entering the CODE you hear a BEEP before you've entered the last digit...stop and start over with the first digit of the CODE. If you mess up while entering the CODE...continue thru to the last digit and start over after the radio BEEPS. When you've sucessfully entered the CODE, the radio will BEEP and CODE will disappear from the radio display.
-----------------------
When you first reconnect battery and the radio has been functioning before you last disconnected that battery, you only need to
1. Key in position 1 or 2, turn radio on
2. Immediately type in 5-digit code on radio buttons
3. The radio will sound a loud beep and you can see the display of a radio station.

If in case in 2. you entered a wrong code by mistake, you'll have to leave the radio on continuously for 60 minutes before trying to enter code again.

shogun >>E32 750iL<< 11/88
7 series Tech tips
http://tinyurl.com/3486c

• Radio Code does not work - maloe 2006-05-17 12:39:26 (455 views)
  • Radio Code does not work - shogun 2006-05-17 21:34:53 (466 views)
    • Re: Radio Code does not work - maloe 2006-05-18 11:56:49 (368 views)
      • Still no Radio ! - maloe 2006-05-21 19:51:23 (357 views)
        • Re: Still no Radio ! - ky7s 2006-06-20 23:27:18 (297 views)
          • Re: Still no Radio ! - maloe 2006-06-21 01:13:18 (305 views)
            • Re: Still no Radio ! - salih 2006-06-21 15:15:59 (298 views)
              • I don't have the code for mine, how would I retireve it? - ljbimmers 2006-07-21 12:46:33 (270 views)
                • Re: I don't have the code for mine, how would I retireve it? - febi 2006-07-26 11:23:07 (248 views)