This message is marked as Important.

Subject: Rearview Camera Installation (Part 3) Author: tdaniely : member since September, 2005 : 1516 posts Posted on: 2005-11-16 10:33:26

I've drilled a small hole in
the base of the trunk, near the TV tuner

Here, I feed a small wire
thru the newly drilled hole

With the location of the
newly drilled hole, the feed wire comes out a

predrilled hole in the bumper

Five minutes later, the wire
is fed and the trim is reinstalled onto

the bumper

Camera looks natural in the
bumper

Here are the Video and power
wires from the camera, fed thru the

hole I drilled

Better view

This post will be used to
mount the relay

These pins will need to be
added to the video modules connectors for

the camera input

A video module connector,
without its "shell"

Temporarily, the camera is
connected to the DVD player's AUX IN until

another issue is worked out. As you can see here, the resolution

is excellent. This photos was taken in a PITCH BLACK parking lot,

backing up to a car in a Wal-Mart parking lot.

At this point in the photo,
each car's bumper was approx 2 feet from

each other

Here, a photo is taken at a
local drive-thru restaurant

Backing up in the parking
garage this morning

 

• Rearview Camera Installation (Part 1) <-- Watch this post today !! (pic) - tdaniely 2005-11-15 11:55:20 (10488 views)
  • The factory camera retrofit camera installations say it is for 9/99 - Roy In GA 2005-11-16 23:55:48 (1018 views)
  • Nice job of documenting your work. It's been added to e38.org - DavidC 2005-11-16 20:26:21 (552 views)
    • Yay !! I'm famous now lol !! (nt) - tdaniely 2005-11-16 20:41:03 (469 views)
  • Rearview Camera Installation (Completed....kinda) - tdaniely 2005-11-16 19:14:01 (1013 views)
  • Rearview Camera Installation (Part 3) (pic) - tdaniely 2005-11-16 10:33:26 (2619 views)
    • Very nice job, Tyre! It looks like the camera you picked - sealbeach740 2005-11-16 15:41:55 (534 views)
    • Nice, but is the image reversed; the license plate of the other car looks weird? - silber98 2005-11-16 11:42:01 (470 views)
      • And now that I think about it....that IS correct - tdaniely 2005-11-16 11:53:03 (496 views)
        • Don't you think it should be readable as if you turned around and looked at the - silber98 2005-11-16 13:24:25 (442 views)
          • Yeah, I agree with Tyre. Mine's a mirror image camera also. - sealbeach740 2005-11-16 15:33:43 (418 views)
          • Rearview cameras are purposely mirrored to mimick your rearview mirror's actions (nt) - tdaniely 2005-11-16 13:27:20 (468 views)
            • LOL Gotcha, see my link below! Thanks! (nt) - silber98 2005-11-16 13:33:36 (426 views)
      • Fortunately, I won't be using it to read (nt) - tdaniely 2005-11-16 11:46:23 (373 views)
        • LOL! Now I think about it, this might be done on purpose for the drivers - silber98 2005-11-16 13:32:12 (357 views)
          • Right...the arse end of the car would move an opposite direction on the screen ! (nt) - tdaniely 2005-11-16 13:35:21 (376 views)
  • Okay, It works (Kinda)<---Photos in about 45 minutes - tdaniely 2005-11-16 08:10:23 (535 views)
    • It does work with a MK1 VM - joel 2005-11-16 09:27:39 (444 views)
      • I used my meter and when I my wife shifted to reverse, Pin 17 went to GROUND - tdaniely 2005-11-16 09:32:33 (480 views)
        • Still depends on where you are measuring the 12V from, try - joel 2005-11-16 10:01:49 (349 views)
          • Connected pin 17 and 10 directly together. Nothing happened - tdaniely 2005-11-16 11:02:58 (418 views)
            • Does it interrupt the nav video at all? If not, then I - joel 2005-11-16 13:25:12 (405 views)
              • Not even a blip when 17 and 10 are connected. Mine isn't factory, but..... - tdaniely 2005-11-16 13:28:25 (379 views)
                • Well, I'm stumped then. Thinking about it I wouldn't guess - joel 2005-11-16 19:24:22 (354 views)
                  • Good suggestion. I'll try it (nt) - tdaniely 2005-11-16 20:33:17 (373 views)
          • I'll try it on lunch break and report the results. Stay close by LOL (nt) - tdaniely 2005-11-16 10:21:11 (400 views)
  • What are the specs on the camera; lux, lines, angle of view, etc. (nt) - Roy In GA 2005-11-16 02:11:27 (398 views)
    • Specs - tdaniely 2005-11-16 08:02:48 (387 views)
      • Re: Specs - grahamp 2005-11-16 08:37:11 (361 views)
        • It is dual mode (nt) - tdaniely 2005-11-16 08:43:08 (382 views)
  • Rearview Camera Installation (Part 2) (pic) - tdaniely 2005-11-15 19:51:49 (3178 views)
    • Wow! That camera fits better than I thought it would. (nt) - sealbeach740 2005-11-15 20:52:28 (480 views)
      • Gimme bout an hour to post the completed photos..... - tdaniely 2005-11-15 20:54:46 (390 views)
  • Cool. Keep us posted..... (nt) - sealbeach740 2005-11-15 14:31:10 (341 views)
  • Very Nice, I really like the diagram and solder joints (nice and clean) ;-) (nt) - silber98 2005-11-15 12:52:02 (418 views)
    • You guys just keep making me dip into my daughter's college fund.... - kepdan 2005-11-15 23:16:12 (416 views)
      • Rear view cameras - leraal 2005-11-15 23:37:24 (745 views)