The 7 Series E38 Forum

735 E38 Misfire/stalling - andyrob 2008-09-29 18:20:58 (34 views)
- Has the fuel filter ever been replaced? (url) - davidc 2008-10-01 02:14:52 (17 views)
  - I guess I'm due ... broke 107K just a few days ago (nt) - aaron00740il 2008-10-01 02:19:19 (6 views)
- Could be CPS or bad sparks/coils. Did you read any codes? (nt) - Edwin 2008-09-30 10:04:34 (10 views)
  - Re: Could be CPS or bad sparks/coils. Did you read any codes? - andyrob 2008-10-02 19:44:39 (7 views)
    - MAF fault solved - andyrob 2008-10-06 18:39:15 (10 views)

Check your tire/tyre pressure - sdmike 2008-09-30 16:04:44 (73 views)
- Re: Check your tire/tyre pressure - Connery 2008-10-01 10:58:58 (54 views)
  - sorry...but your info is absolutely INCORRECT... - Q 2008-10-01 12:38:26 (46 views)
    - so, Q, what's up with Euro/NA spec difference in door jamb? (nt) - mrnobody 2008-10-02 09:06:11 (5 views)
    - Q, so what would be correct, I run mine according to door - 750iL96erBill 2008-10-01 12:51:15 (21 views)
      - see the link in my reply below & scroll down to the LOAD INDEX/PSI chart... - Q 2008-10-01 13:03:43 (25 views)
        
        My car shows 32 front and 39 rear, chart only goes to 36... (nt) - 750iL96erBill 2008-10-01 13:41:10 (10 views)
        
        keep scrolling down...there's another chart right below it that goes higher (nt) - Q 2008-10-01 15:19:27 (7 views)
    - The Falken website even has a PSI table...and 51 psi is not what you (url) - Q 2008-10-01 12:50:55 (26 views)
      - Re: The Falken website even has a PSI table...and 51 psi is not what you - Connery 2008-10-01 13:27:58 (27 views)
        
        I did do a ''little''research on the Falken tire site...and it too did - Q 2008-10-01 15:47:51 (10 views)
  - Are you sure those ''specs'' on the Falkens were not the max pressures? (nt) - beechy 2008-10-01 11:02:40 (7 views)
    - Re: Are you sure those ''specs'' on the Falkens were not the max pressures? - Connery 2008-10-01 11:41:57 (12 views)
      - Double check your pressure! I don't see any 50 psi on any Falkens tires (url) - bmw635 2008-10-01 11:48:54 (14 views)
        
        Re: Double check your pressure! I don't see any 50 psi on any Falkens tires - Connery 2008-10-01 12:12:53 (8 views)
        Re: Double check your pressure! I don't see any 50 psi on any Falkens tires (url) - Connery 2008-10-01 12:03:23 (19 views)
        
        Wooow, you're right! My tires require 51 psi too- will check my pressure now.Thx - bmw635 2008-10-01 12:27:09 (10 views)
        
        Re: Wooow, you're right! My tires require 51 psi too- will check my pressure now.Thx - Connery 2008-10-01 12:51:28 (6 views)
        Linky to my tire's spec (url) - bmw635 2008-10-01 12:31:29 (19 views)
- I did this 3 days ago..Im used to 40 psi fronts and when I chkd them - snitch740i 2008-10-01 01:48:02 (9 views)
- Speaking of...why different PSI for Euro/NA - mrnobody 2008-09-30 17:20:03 (28 views)
  - I think air is thicker in Europe :) (nt) - bsnedeker 2008-09-30 22:35:48 (11 views)
    - Don't go there ;-). We jus have beter roads and tires ;-) (nt) - Edwin 2008-10-01 01:29:45 (8 views)
      - up already? (nt) - sdmike 2008-10-01 01:38:17 (6 views)
        
        Yep leaving in an hour ;-) can't wait to have US style breakfast..... (nt) - Edwin 2008-10-01 01:42:07 (8 views)
        
        You mean cereal and skim milk? (nt) - davidc 2008-10-01 01:57:44 (8 views)
        
        No ... green eggs and ham ... lol (nt) - aaron00740il 2008-10-01 02:20:54 (7 views)
        
        spam spam spam spam (nt) - sdmike 2008-10-01 02:28:35 (8 views)
        
        Spam is grand. It comes in can. But it's not a grand as green eggs and ham (nt) - aaron00740il 2008-10-01 02:38:55 (5 views)
        
        MMMMMM spam.............. (nt) - Edwin 2008-10-01 02:42:13 (5 views)
        
        not a chance. In place of spam we'll do sliced brats with eggs (nt) - sdmike 2008-10-01 03:38:28 (2 views)
        
        ahhh..you just wait. :) (nt) - sdmike 2008-10-01 01:51:33 (5 views)
        Bring me a Euro Plate bumper trim :) (nt) - snitch740i 2008-10-01 01:48:48 (5 views)

Auction numbers 05 and 06 Volvo XC90 V8? Is Ultymte around? - JohnG 2008-09-30 13:08:05 (20 views)
- My wife's cousin a DDS in Dallas has a 6 and loves his - about 1 yr old. (nt) - TxDarth 2008-10-01 10:45:59 (7 views)
  - Good to hear - that's an 07 or 08 with the new 3.2 naturally aspirated I6 - JohnG 2008-10-01 15:17:56 (6 views)
    - John, I had an older '98 V70 R Wagon - put 95k on it. - TxDarth 2008-10-01 16:38:05 (5 views)
      - pic....... (pic) - TxDarth 2008-10-01 16:39:02 (23 views)
- A buddy of mine has an 06 XC90 for his wife and the electrical system gremlins (nt) - are creating havoc. 2008-09-30 14:54:31 (13 views)
  - JDpower initial and 3 year numbers are bad - XJ, X5, E are all much better - JohnG 2008-09-30 16:37:37 (10 views)
- I don't have auction numbers, but you are correct in thinking the T6 is dragging - Redneckarsulm 2008-09-30 14:20:46 (15 views)
  - 2.5T might work if FWD, but that's hard to find - JohnG 2008-10-01 10:00:27 (8 views)
    - I agree - the v8 is a better choice (wasn't out when we got ours) - Redneckarsulm 2008-10-01 10:37:42 (5 views)
  - I'm pretty confident in the V8 engine itself - Yamaha = SHO - JohnG 2008-09-30 16:44:33 (11 views)
    - IIRC, Yamaha also builds the ZR1 Corvette engine. (nt) - bmw635 2008-09-30 16:49:43 (7 views)
      - Close - Mercury Marine built the C4 ZR1 engine - JohnG 2008-09-30 16:53:29 (4 views)

Radiator Removal Stuck Hoses Stubborn Bolt... HELP!!! (pic) - theultimate740il 2008-09-30 15:52:20 (98 views)
- Re: Radiator Removal Stuck Hoses Stubborn Bolt... HELP!!! (pic) - theultimate740il 2008-10-01 14:41:40 (37 views)
- I also did this last week - I used a flat screw driver to gradually pry it apart (nt) - stritarja 2008-09-30 20:43:04 (10 views)
- I just did this last weekend...it was difficult - mrnobody 2008-09-30 17:10:23 (17 views)
  - They get much easier to remove after the 8th or 9th time you pop it loose :) - bsnedeker 2008-10-01 16:22:32 (5 views)
  - Those clampless connectors are called ''quick connect'' for a reason... - WTH 2008-09-30 18:55:51 (18 views)
    - Quick 'disconn-!!!@#$-ect' is exactly what I recall thinking... (nt) - mrnobody 2008-09-30 23:45:54 (6 views)
- 2nd pic, press in use a flat blade screw drive to wiggle it out. good luck! (nt) - Edwin 2008-09-30 16:37:00 (9 views)
- First off take a breath.....there now go to E38.org, it will tell you - Just Bill 2008-09-30 16:00:51 (19 views)
  - +1, you do not need to remove that bolt to get the radiator out - larryd740il 2008-09-30 17:02:46 (8 views)
  - Ditto, I replaced mine with lots of help from the board (and e38.org) (nt) - melissa 2008-09-30 16:04:44 (9 views)

my sad day - Lawguy 2008-09-30 12:39:24 (171 views)
- Sorry to hear that, Pete! (nt) - absessler 2008-10-01 14:13:01 (1 views)
- ......Spoonie (nt) - Spoonie 2008-10-01 06:09:26 (7 views)
  - Huh? (nt) - absessler 2008-10-01 14:13:13 (2 views)
- Sorry Pete - been there and done that. Its tough - they are family. (nt) - RobinK 2008-10-01 03:45:41 (2 views)
- this was a tuff day for alot of peeps....Sorry to hear that...Dog heaven she`s @ (nt) - snitch740i 2008-10-01 01:46:17 (3 views)
- so sorry to hear of your loss - inconsistent 2008-09-30 22:09:37 (3 views)
- Sorry for your loss - BJames38 2008-09-30 21:57:19 (6 views)
- YGM Pete.................. (nt) - beechy 2008-09-30 21:53:37 (3 views)
- I am so sorry for your loss. (nt) - Kirt 2008-09-30 21:51:07 (3 views)
- So sorry for your loss...Kate (nt) - katiedarling 2008-09-30 21:38:00 (3 views)
- Very sincere sympathies - jimmn750il 2008-09-30 21:28:54 (3 views)
- Pete, we are blessed when we have those wonderful.... - pj740il 2008-09-30 21:28:05 (7 views)
- Sorry to hear it Pete. My sig shows I love pups and its always hard to lose one. - eaglecomm 2008-09-30 20:36:29 (6 views)
- I am very sorry. I've been down this path with two dogs so far. (nt) - JerrytheK 2008-09-30 19:55:09 (6 views)
- Sorry for your loss Pete, I am sure the dog had a wonderfull life with you (nt) - rg0115 2008-09-30 19:53:46 (3 views)
- Thanks so much.... (pic) - Lawguy 2008-09-30 18:12:26 (75 views)
  - My Bichon put a nice big scratch in the center consol of my E320... - bghark 2008-09-30 18:37:21 (4 views)
  - did you at least put a towel on the seat? j/k Pete. :) (nt) - sdmike 2008-09-30 18:36:01 (5 views)
    - Yep. I'm grief stricken today....but not f-ing crazy! LOL.... (nt) - Lawguy 2008-09-30 19:36:14 (4 views)
- So, so sorry....been there too many times, I feel your pair - melissa 2008-09-30 17:31:46 (26 views)
  - not to hijack this somber thread, but.... - sdmike 2008-09-30 18:37:40 (14 views)
    - OMG.......that was truly great! (nt) - Lawguy 2008-09-30 19:36:41 (6 views)
- Peter, I know exactly how you are feeling friend. She was fortunate to be loved - bghark 2008-09-30 17:24:22 (3 views)
- Pete my sincere condolences. It's a very hard experience to endure. (nt) - HighLine740iL 2008-09-30 17:22:03 (3 views)
- Ouch , Sorry for your loss bro. - Krazy D 2008-09-30 17:14:05 (5 views)
- So sorry to read about Kate. I bet you gave her a great life. (nt) - sealbeach740 2008-09-30 15:49:12 (3 views)
- YGM (nt) - Peter 2008-09-30 14:06:18 (3 views)
- Hang in there, I don't know what I'll do when Teddy & Mishu are gone (pic) - Blue740i 2008-09-30 13:58:09 (46 views)
  - Thanks, Chuck. Cute little dogs.....! (nt) - Lawguy 2008-09-30 19:41:45 (3 views)
- It's never easy..... - pdef1949 2008-09-30 13:57:37 (5 views)
- Sorry for your loss man! I don't want to think of that moment when my - Edwin 2008-09-30 13:52:30 (6 views)
- Sorry for your loss. - 740ilDuke 2008-09-30 13:43:29 (3 views)
- Sorry for your loss Pete.. yes, pets are like family members to most of us.. (pic) - larryd740il 2008-09-30 13:02:40 (42 views)
  - Wow.....that is one cool cat! (nt) - Lawguy 2008-09-30 19:41:21 (3 views)
- Im Very Sorry Peter. when i lost one of my puppies i was crying like a baby - farhod 2008-09-30 12:50:45 (3 views)
- I'm so sorry, Pete. Pets are members of our families - sdmike 2008-09-30 12:47:59 (6 views)
- Pete, I am so sorry, I had a black lab once, that I found as a stray, - Just Bill 2008-09-30 12:45:51 (7 views)

2KiL Cassette Mechanism - BOISE DJ 2008-09-30 14:01:04 (24 views)
- Re: 2KiL Cassette Mechanism - BOISE DJ 2008-09-30 18:33:01 (10 views)
- I have never seen anyone post a repair for the 4:3 screen cassette mechanism - Brian 2008-09-30 15:05:05 (15 views)
  - +1. Not worth the hassle of repair, IMO - sdmike 2008-09-30 15:48:28 (10 views)
    - Until now. Mine is the only one in the world that works. =) Video proof. (nt) - visionbmw7 2008-09-30 23:26:53 (11 views)
      - Re: Until now. Mine is the only one in the world that works. =) Video proof. - pass427 2008-10-01 14:12:59 (2 views)

Stereo Problems - 740iluv 2008-09-29 19:53:14 (26 views)
- Re: Stereo Problems - phil750il 2008-10-01 13:02:24 (5 views)
- Just in time.... - 740ilDuke 2008-09-29 22:33:50 (16 views)
- You have a dead radio module - Brian 2008-09-29 20:37:55 (10 views)

Why should I upgrade my MKII NAV to a MKIV? - connery 2008-09-30 12:14:30 (63 views)
- Re: Why should I upgrade my MKII NAV to a MKIV? - Connery 2008-10-01 11:16:17 (10 views)
  - Ditto. I miss the wood-trimmed look of my old screen... - Brian 2008-10-01 11:39:13 (12 views)
    - yeah...my son thinks that tilt out mechanism is SO cool :) (nt) - sdmike 2008-10-01 11:46:19 (10 views)
      - That reminds me, Txdarth said he had a person who could do Faux finishes. - bghark 2008-10-01 12:16:44 (5 views)
        
        Re: That reminds me, Txdarth said he had a person who could do Faux finishes. - Connery 2008-10-01 12:24:16 (4 views)
- Re: Why should I upgrade my MKII NAV to a MKIV? - Connery 2008-09-30 17:15:18 (37 views)
  - That's a clean shark ya got there! I got contagious from Brian- went (pic) - bmw635 2008-09-30 18:36:05 (62 views)
    - Re: That's a clean shark ya got there! I got contagious from Brian- went - Connery 2008-09-30 19:17:53 (13 views)
  - Live large!!! It's all worth every penny. - Brian 2008-09-30 17:20:46 (16 views)
- Best mod I have ever done ! - Krazy D 2008-09-30 16:16:19 (11 views)
- I just did this! - 740ilDuke 2008-09-30 13:48:30 (20 views)
  - Re: I just did this! - Connery 2008-09-30 14:22:07 (13 views)
    - It's all plug and play. - sdmike 2008-09-30 15:50:32 (11 views)
    - Plug and Play, took all of 40 mins. - 740ilDuke 2008-09-30 14:29:44 (15 views)
- Here's a summary of the differences between the nav computers (url) - Brian 2008-09-30 12:33:46 (43 views)
  - Re: Here's a summary of the differences between the nav computers - Connery 2008-09-30 12:42:31 (16 views)
    - Right, this is the list of stuff to add Sirius, after you get the MKIV... - Brian 2008-09-30 12:45:39 (14 views)
      - Re: Right, this is the list of stuff to add Sirius, after you get the MKIV... - Connery 2008-09-30 12:59:15 (17 views)
- I upgraded to the MKIII and I'm glad I did - sdmike 2008-09-30 12:28:14 (15 views)
- I feel the MK4 prices are nuts. There is a HUGE difference from ... - bghark 2008-09-30 12:25:20 (26 views)
  - Ummmmmm Nav.......... (nt) - Just Bill 2008-09-30 12:28:48 (12 views)
    - My sons Garmin works alot better. I love the OEM nav but it is - bghark 2008-09-30 12:37:16 (17 views)
      - Your right B, but man they sure look cool in the dash, especially the 16 x 9 (nt) - Just Bill 2008-09-30 12:56:19 (7 views)
        
        Re: Your right B, but man they sure look cool in the dash, especially the 16 x 9 - Connery 2008-09-30 13:02:17 (20 views)
        
        check the ''For Sale'' forum. There's always someone selling disks, since.. - sdmike 2008-09-30 15:58:53 (10 views)
        
        Re: check the ''For Sale'' forum. There's always someone selling disks, since.. - Connery 2008-09-30 19:32:36 (4 views)

OT: Man, bad things do happen in threes:-( I'm taking my - Peter 2008-09-30 11:31:56 (200 views)
- Peter, Concern, thoughts, & prayers from across the lake (nt) - Mitch 2008-10-01 10:09:33 (2 views)
- Be well... and prayers (nt) - Claudio 2008-10-01 08:43:28 (3 views)
- Keep the faith Peter. (nt) - Spoonie 2008-10-01 06:12:46 (7 views)
- Sorry Peter - it's a hell of tough situation. I'll be thinking of you both. (nt) - RobinK 2008-10-01 03:31:50 (1 views)
- Peter, hang in there, hope doctor has better news for you soon. - JL 2008-10-01 01:40:09 (4 views)
- Duke is very good for that sort of problem. A Neighbor's wife went there - Roy In GA 2008-10-01 00:18:58 (8 views)
- Prayers and well wishes from down south to you. (nt) - atl7 2008-09-30 22:13:59 (6 views)
- prayers an MoJo headed your way (nt) - inconsistent 2008-09-30 22:06:45 (4 views)
- My thoughts & prayers are with You an Family (nt) - BJames38 2008-09-30 22:03:03 (2 views)
- Our prayers go out to you. (nt) - Bennett 2008-09-30 22:00:24 (4 views)
- YGM buddy.................. (nt) - beechy 2008-09-30 21:55:47 (4 views)
- Peter you and your family are in my prayers. (nt) - mahmudb 2008-09-30 21:52:28 (4 views)
- Keeping you and your wife in my thoughts and prayers, hang in there... (nt) - katiedarling 2008-09-30 21:36:26 (4 views)
- Keeping you and yoru wife in my thoughts and prayers, hang in there... (nt) - katiedarling 2008-09-30 21:35:54 (5 views)
- Peter, you and your wife will be in many prayers. May it be good news TH. (nt) - pj740il 2008-09-30 21:19:33 (4 views)
- I feel for you.. we have had some hard times in the last few months too. - eaglecomm 2008-09-30 20:34:53 (4 views)
- Best wishes - Hope all three turn out well for you. (nt) - JeffChia 2008-09-30 20:17:41 (7 views)
- I know it is extemely hard to beilive at this time but there is - JoeC 98 740il & 750il 2008-09-30 20:07:06 (6 views)
- I know you dont like me Peter...but I give my condolances to you and your wife - snitch740i 2008-09-30 19:22:17 (10 views)
  - Thank you for your thoughts and consideration. I'm sorry you feel I don't - Peter 2008-09-30 19:56:53 (22 views)
- Peter....having just read this to my wife.... - whiteil 2008-09-30 19:15:00 (8 views)
- Peter, will keep you and your wife in my prayers ... (nt) - Krazy D 2008-09-30 17:11:17 (4 views)
- Thoughts are with you. Did you get my mail? (nt) - bmw635 2008-09-30 16:51:24 (8 views)
  - Got it. Thanks, Pete. (nt) - Peter 2008-09-30 17:45:15 (4 views)
- Peter, I'm there with you too. (nt) - bpddaddy 2008-09-30 16:45:56 (4 views)
- Peter, our prayers are with you... sincere hopes that all turns out well. (nt) - larryd740il 2008-09-30 15:32:51 (6 views)
- My prayers are with you Peter. I know you'll go thru' all these and... - mdude 2008-09-30 15:00:47 (6 views)
- Peter, hang in there. My thoughts are with you (nt) - Edwin 2008-09-30 13:53:51 (8 views)
- If he brings you to it, he'll bring you through it. Keep the chin up Peter! (nt) - 740ilDuke 2008-09-30 13:40:28 (6 views)
- Peter Ill be prayin for you and your wife.Hopefully everything will be just fine (nt) - farhod 2008-09-30 12:53:21 (4 views)
- We rarely get more than we can handle.... - Sean 2008-09-30 12:38:07 (12 views)
  - Sean, thank you for those thoughtful words. (nt) - Peter 2008-09-30 14:15:46 (5 views)
- Peter - YGM @ nutec email addy. (nt) - Lawguy 2008-09-30 12:26:28 (4 views)
- Peter, my friend. My prayers are with you and your wife. Hang in there! (nt) - sdmike 2008-09-30 12:24:47 (7 views)
  - Thanks, Mike. You've got a situation to deal with as well and I appreciate - Peter 2008-09-30 14:16:55 (7 views)
    - Dude, we're all in this together. Empathy provides comfort... - sdmike 2008-09-30 20:57:59 (10 views)
- Peter, Our thoughts and prayers for you, your wife & family. - Just Bill 2008-09-30 12:23:05 (7 views)
- You know we are a praying family Peter. We prayed for your son... - bghark 2008-09-30 12:19:38 (24 views)
  - Thank you, Brian. Your thoughts and prayers are appreciated. I do believe - Peter 2008-09-30 14:14:52 (16 views)
- Wow, very sorry. Will be praying for you two. (nt) - nbate 2008-09-30 12:19:19 (5 views)
- Hang in there Peter...our prayers to you and your wife. Stay strong! (nt) - TxDarth 2008-09-30 12:14:40 (4 views)
- Our prayers are with you. (nt) - Imolatony 2008-09-30 12:11:09 (5 views)
- Oh Peter - I sure hope you hear good news about your wife. - sealbeach740 2008-09-30 12:07:02 (9 views)
  - Thanks, Keith. I really believe ''this too shall pass''. It always does. (nt) - Peter 2008-09-30 14:18:17 (6 views)
    - You know we're all rooting for you & your family. Keep your head up. (nt) - sealbeach740 2008-09-30 15:43:53 (8 views)
      - Always keep my head up (ex-hockey player). And I know you are rooting - Peter 2008-09-30 20:00:48 (6 views)
        
        LOL! I was wondering if you'd catch the little hockey inuendo! (nt) - sealbeach740 2008-09-30 23:36:46 (4 views)
- Our support is with you. (nt) - Mario 2008-09-30 12:04:56 (4 views)
- Our thoughts are with you. Keep us posted. (nt) - JerrytheK 2008-09-30 11:56:53 (4 views)
- Man that's a tough situation, hope your wife is ok. Hang in there, it'll get - rg0115 2008-09-30 11:34:32 (6 views)

RUST !!! - but easy fix (pic) - eismark 2008-09-29 17:07:23 (131 views)
- Just have to love all the salt we put on the roads in Europe (nt) - Edwin 2008-09-30 10:02:07 (6 views)
  - ... and love the fact that us Irish are too lazy to do the same! (nt) - RobinK 2008-10-01 04:01:45 (3 views)
    - Yeah .. save the salt for more important things ... like a Salty Dog (nt) - Irish Pint Of View 2008-10-01 04:14:00 (1 views)
- I would move...don't like your smokeless tobacco either,,,,,,,,,, (nt) - TxDarth 2008-09-29 22:03:26 (6 views)

Paging water pump experts, do I need a gasket for this thermostat? (pic) - Mario 2008-09-30 11:00:27 (47 views)
- Re: Paging water pump experts, do I need a gasket for this thermostat? - oembimmerparts 2008-09-30 11:03:28 (13 views)
  - Point taken on torqueing. Any one have the torque values? TIA. (nt) - Mario 2008-09-30 12:07:29 (9 views)
    - 10 Nm = 7.5 lb-ft (nt) - stritarja 2008-09-30 20:47:25 (6 views)
    - Re: Point taken on torqueing. Any one have the torque values? TIA. - thesteve 2008-09-30 17:31:45 (8 views)

1997 BMW 740IL Quad Lights - sotokoto 2008-09-29 21:54:45 (40 views)
- Here's an extraordinarily detailed writeup, we part numbers... (url) - mrnobody 2008-09-30 17:30:40 (27 views)
- I know there's plenty of threads on this one. Just one question: Can you do the - captainsilva 2008-09-30 15:09:56 (12 views)
  - Just tap in the wiring socket. First locate the wire you need to send signal to. - Mario 2008-09-30 15:25:09 (9 views)
    - Thanks Mario (nt) - captainsilva 2008-09-30 16:22:11 (6 views)
      - ...(damn Enter key) I'm going to give it a shot this week! I'll post some pics - captainsilva 2008-09-30 16:23:07 (5 views)
- Not sure how the wiring is on a 97, but on my 01 I was able to do it as seen in (url) - rg0115 2008-09-30 11:43:29 (14 views)
- Re: 1997 BMW 740IL Quad Lights (pic) (url) - 740ilDuke 2008-09-29 22:01:59 (78 views)
  - Here you go (url) - 740ilDuke 2008-09-29 22:10:02 (34 views)
- You don't need to be techno for that. Just run one wire. - Mario 2008-09-29 21:57:08 (8 views)

Blacked out tail lights - rex120 2008-09-30 00:16:03 (47 views)
- This is Blacked out on all three of my bimmers :) Your Link shows tinted :0 (pic) - cleanride740il 2008-09-30 11:48:04 (49 views)
- just take your own headlights and tint them. (nt) - 740ibimmer 2008-09-30 00:21:34 (15 views)
  - Question: How do you do this? - bsnedeker 2008-09-30 15:03:09 (13 views)
  - Re: just take your own headlights and tint them. - rex120 2008-09-30 02:52:21 (10 views)

HELP PLZ! - white740 2008-09-30 09:53:42 (21 views)
- thanks, 1 more question if you have a answer? - white740 2008-09-30 13:59:46 (14 views)
  - If it's cold it could be the tires, try using a spare tire to find out if it - Edwin 2008-09-30 14:09:34 (11 views)
- Power steering fluid or low fluid in gearbox, also check belt tension (nt) - Edwin 2008-09-30 09:55:22 (12 views)

'96 740 would not start + run [followup]. I had posted in May ... (url) - WTH 2008-09-30 12:49:25 (69 views)
- Nice fix, glad you found it! (nt) - Edwin 2008-09-30 13:56:05 (3 views)
- congrats on the fix! (nt) - sdmike 2008-09-30 12:53:07 (6 views)
  - Thanks, Mike. W/ some of the probs. recently posted (pets, wives, etc.) it's... - WTH 2008-09-30 12:57:52 (6 views)

HELP! Putting 10 x 19 Hamanns on Front of 01? (pic) - mancho 2008-09-29 21:03:02 (106 views)
- Wheel Technology of North Texas (url) - JL 2008-09-29 23:27:43 (13 views)
- Is it 1 pc cast or welded together? May be looking at reusing the star - bmw635 2008-09-29 22:21:09 (8 views)
  - Re: Its 1 piece alloy I believe - mancho 2008-09-29 22:41:58 (7 views)
- Are the aftermarkets that different? - 740ilDuke 2008-09-29 22:17:44 (8 views)
  - Re: aftermarkets ??? WHERE? - mancho 2008-09-29 22:44:36 (7 views)
    - Re: aftermarkets ??? WHERE? - 740ilDuke 2008-09-29 23:12:10 (7 views)
      - Re: How scammie do these Reps smell? (url) - mancho 2008-09-30 09:31:05 (7 views)
        
        Re: How scammie do these Reps smell? - 740ilDuke 2008-09-30 13:52:40 (4 views)
- WHy not have the 8.5 straightened and repainted??? (nt) - it ! TxDarth 2008-09-29 21:43:51 (11 views)
  - Re: WHy not have the 8.5 straightened and repainted??? - mancho 2008-09-29 21:48:43 (17 views)
    - If it still required that much weight - don't think it was right. (nt) - TxDarth 2008-09-29 21:58:46 (7 views)

OT: Housing market must be real bad- bank accepted our ridiculous offer on a - bmw635 2008-09-29 17:16:38 (138 views)
- Way to go Peter! Glad someone is getting lucky in the economy! - bghark 2008-09-30 09:41:11 (7 views)
- Congrats, Peter! What city? Oh, and congrats on 1500+ posts..... (nt) - sealbeach740 2008-09-30 00:02:27 (10 views)
  - Same city, just 2 miles closer to beach, 1 more car garage, and 800 sqft more - bmw635 2008-09-30 00:58:46 (18 views)
    - Sorry to hear that man, sound like it sucks ;-) you can show me in a week! (nt) - Edwin 2008-09-30 09:56:45 (4 views)
- Time for a backyard party! (pic) (url) - 740ilDuke 2008-09-29 22:15:36 (85 views)
- Congrats Peter. CNN announced there are 1300 foreclosure everyday in Cali. - Mario 2008-09-29 19:37:53 (16 views)
  - About 1/4 of the houses for sale in our area are bank owned. - bmw635 2008-09-29 19:45:13 (16 views)
- Thanks to all for the encouragement- I am nervous since market is dropping (pic) - bmw635 2008-09-29 18:11:11 (148 views)
- Congratulations!! Sounds like a you got a great deal! (nt) - Kirt 2008-09-29 18:05:08 (7 views)
- Congratulations. It is allways the Q when you sell /buy something quickly: - eismark 2008-09-29 17:30:12 (24 views)
- Peter, congratulations! The only problem with a three car garage is when you - JerrytheK 2008-09-29 17:30:04 (13 views)
  - No problem, I got that planned and figured out too. There's an access/ RV - bmw635 2008-09-29 17:35:24 (8 views)
- Congrats Peter! A friend of mine is on the other side of a deal like that - sdmike 2008-09-29 17:18:51 (23 views)
  - +1 in bankruptcy losing 3+ Million in property ... very few saw what the banks - aaron00740il 2008-09-29 17:55:29 (28 views)

Anyone know how much to torque the oil drain plug is to the pan? - Ed 2008-09-30 01:35:13 (9 views)
- @ 18-20 ftlbs. (nt) - bmw635 2008-09-30 01:38:06 (4 views)

Anybody ever used this diagnostic equipment? (pic) - Mario 2008-09-29 19:54:01 (97 views)
- You most likely need the BMW Determinator Cable... (url) - JR 2008-09-29 22:50:17 (23 views)
  - I have that cable. I can connect and diagnose Engine error codes..(more) (pic) - Mario 2008-09-30 00:35:33 (34 views)