The 7 Series E32 Forum

new to me 750i draining battery - bfb 2008-10-21 12:09:27 (59 views)
- Rear reading lights on C-pillar - Patrick C 88 750 160K 2008-10-21 18:19:33 (36 views)
- are you sure your alternator is charging your battery? - eliasazem 2008-10-21 12:51:30 (55 views)
  - Re: are you sure your alternator is charging your battery? - mbonifield04 2008-11-12 12:36:47 (18 views)
- You likely have a short somewhere. - bcweir750 2008-10-21 12:29:29 (50 views)
  - finding the power drain - for beginners - shogun 2008-10-21 19:14:22 (112 views)
    - Re: finding the power drain - for beginners - bfb 2008-10-22 06:25:17 (39 views)
      - Re: finding the power drain - for beginners - hobbymekk 2008-10-22 10:06:38 (50 views)
        
        Re: finding the power drain - for beginners - bfb 2008-10-23 10:26:24 (38 views)
        
        Good find! I'd do away w the wiper pressure relay forever - Patrick C 88 750 160K 2008-10-23 16:26:36 (40 views)
        
        Re: finding the power drain - for beginners - bfb 2008-10-22 11:08:54 (37 views)

Climate fan squealing (many questions) - nostness 2008-10-23 12:24:37 (62 views)
- Re: Climate fan squealing (many questions) - ttrm007 2008-11-09 10:08:21 (8 views)
- I was able to oil mine - geerhed 2008-10-26 20:44:40 (25 views)
- You need a new blower motor. - az735i 2008-10-23 14:01:24 (41 views)
- Had the same problem and... (url) - cvillebimmer 2008-10-23 12:48:16 (53 views)
  - Re: Had the same problem and... - nostness 2008-10-24 18:00:25 (32 views)

Proper brake rotor sizes....Brembo, Balo, - 92735i 2008-10-20 11:25:23 (40 views)
- Re: Proper brake rotor sizes....Brembo, Balo, - bk62 2008-11-02 12:00:08 (6 views)
- Can't you upgrade to an E31 braking system? - whiteghost 2008-10-22 10:05:39 (19 views)
- I use Balo solid rotors for 7 yrs purchased from Pelican Parts no complaints (nt) - DG740I 3/93 2008-10-20 11:55:29 (26 views)
  - I switched - intense735i 2008-10-24 11:23:20 (10 views)

center drag link, Febi or Lemforder if the price is the same?? - rv8flyboy 2008-10-23 16:12:46 (36 views)
- Just installed Lemforder myself. (nt) - cspargo 2008-10-23 21:16:54 (28 views)
  - got a Lemforder, got a question too - rv8flyboy 2008-10-29 09:51:57 (30 views)
    - Re: got a Lemforder, got a question too - windhund 2008-10-31 07:37:42 (10 views)
- Lemforder equals high quality to me. If I were you, (nt) - windhund 2008-10-23 18:09:27 (23 views)

Can Meyle suspension bushings be replaced with lemforder? - Nick (Australia) 2008-10-22 05:44:47 (40 views)
- Had a look underneath today - Nick (Australia) 2008-10-30 08:43:59 (15 views)
- Re: Can Meyle suspension bushings be replaced with lemforder? - windhund 2008-10-22 07:31:10 (32 views)
  - Yes because I suspect my recently replaced Meyle parts have already failed - Nick (Australia) 2008-10-22 09:25:39 (39 views)
    - Re: Yes because I suspect my recently replaced Meyle parts have already failed - maun 2008-10-22 23:36:34 (47 views)
      - try as maun suggests - shogun 2008-10-23 23:20:04 (27 views)

M30 Head Gasket - Isiah 90-735il 2008-10-24 23:12:25 (50 views)
- Those bolts are only designed to be torqued ONCE... - bcweir750 2008-10-25 00:08:57 (50 views)
  - Please be very careful re-using head bolts. - 735iguy 2008-10-27 21:00:31 (33 views)
  - Need Help!!!!! - Isiah 90-735il 2008-10-27 20:13:33 (37 views)
    - Here was how I lossen the rotor-cam bolts (url) - Patrick C 88 750 160K 2008-10-27 21:59:14 (35 views)
      - I got it off - Isiah 90-735il 2008-10-28 23:45:27 (24 views)
      - loosen (nt) - Patrick C 88 750 160K 2008-10-27 21:59:58 (19 views)
  - Re: Those bolts are only designed to be torqued ONCE... - hobbymekk 2008-10-25 17:51:34 (31 views)
  - Not true. - cspargo 2008-10-25 17:40:13 (33 views)
    - You can reuse M30 head bolts. I did. Worked fine. M30 bolts are not strech bolts - Johan750 2008-10-25 17:59:33 (28 views)
    - Doh - bad title. 'Maybe' not true closer to the mark. :) (nt) - cspargo 2008-10-25 17:41:20 (22 views)

***Battery dead how do I open door?*** - 1985ruf 2008-10-18 15:58:16 (54 views)
- can anyone help?? (nt) - 1985ruf 2008-10-18 18:00:14 (44 views)
  - Re: can anyone help?? - Layne 2008-10-18 18:08:07 (42 views)
    - i need help asap! (nt) - 1985ruf 2008-10-18 18:12:04 (33 views)
      - use search: DEAD BATTERY DOOR LOCKED (url) - shogun 2008-10-18 18:36:12 (66 views)
        
        emergency unlock alternatives - steveg 2008-10-27 20:32:15 (15 views)

88 750 parts (url) - ron4cow 2008-10-23 21:39:46 (199 views)
- parts received today! - whiteghost 2008-10-25 23:55:01 (33 views)
  - Re: parts received today! - eos 2008-10-26 22:28:09 (20 views)

O-rings for LAD shoks - gizi 2008-10-24 06:15:47 (33 views)
- which ones exactly? Tell us in detail (url) - shogun 2008-10-24 07:43:58 (60 views)
  - here a good used set from sponegbob EURO 120 (url) - shogun 2008-10-24 08:54:53 (41 views)
    - A used good set is still used and the newest e32 is 14 years old...do the math (nt) - Johan750 2008-10-26 04:54:06 (16 views)
    - Can you find for me his phone number Shogun - gizi 2008-10-24 17:29:35 (14 views)
    - Re: here a good used set from sponegbob EURO 120 - gizi 2008-10-24 13:37:52 (22 views)
      - they are normal LAD, not EDC with LAD - shogun 2008-10-24 20:33:54 (23 views)
        
        Shogun, Does Andre Abenson speaks english? - gizi 2008-10-26 13:39:50 (16 views)
        
        yes, If he cannot understand, his wife translates it - shogun 2008-10-26 17:51:47 (17 views)
        
        Re: they are normal LAD, not EDC with LAD - gizi 2008-10-25 05:03:29 (19 views)
        
        already sold to a 7-Forum member he told me (nt) - shogun 2008-10-25 18:08:06 (25 views)
        
        Can somebody send to me set of those O-rings, I dont know where to find hem (nt) - gizi 2008-10-26 13:35:40 (20 views)
        
        there are no sets available - shogun 2008-10-26 21:53:53 (19 views)
        
        for EDC repair try Sportsline in U.K. (url) - shogun 2008-10-26 22:22:39 (19 views)

Budget Oxygen Sensors? - vinceinil 2008-10-25 00:46:17 (42 views)
- Bosch list price $163.00 >>>>your price $75.68 (url) - shogun 2008-10-25 00:55:01 (52 views)
  - Re: Bosch list price $163.00 >>>>your price $75.68 - vinceinil 2008-10-25 19:49:59 (33 views)
  - Re: Bosch list price $163.00 >>>>your price $75.68 - whiteghost 2008-10-25 01:51:32 (37 views)
    - Re: Bosch list price $163.00 >>>>your price $75.68 - vinceinil 2008-10-25 23:54:13 (32 views)
      - Re: Bosch list price $163.00 >>>>your price $75.68 - whiteghost 2008-10-26 02:04:31 (35 views)

Exhaust in car cabin - 750il4u 2008-10-24 13:46:30 (37 views)
- exhaust or fuel smell? (url) - shogun 2008-10-24 21:26:46 (53 views)
  - Combine sections into one long hose (x 2) - Patrick C 88 750 160K 2008-10-26 02:01:24 (22 views)

Thrust Arm bolt/bushing, how critical is loading the car per Bentley? - bimmermeister 2008-10-24 00:43:08 (46 views)
- Completed job with Meyle HD from AutohausAZ - bimmermeister 2008-10-25 22:25:46 (36 views)
- Main thing is to not have susp. hanging when torquing - erwin 2008-10-24 10:30:20 (34 views)
- MANDATORY (nt) - kfister 2008-10-24 02:07:29 (33 views)
  - Not preloading the bushings can lead to premature bushing failure. - bcweir750 2008-10-24 02:15:05 (29 views)
    - let's see who does it? Not me - shogun 2008-10-24 02:59:22 (60 views)
      - I meant 150lbs in ea. front seat + 150 lbs in rear center prior torquing (nt) - shogun 2008-10-24 07:46:31 (27 views)

voltage regulator, no charging - rv8flyboy 2008-10-19 19:57:45 (54 views)
- Re: voltage regulator, no charging - rv8flyboy 2008-10-25 21:22:51 (22 views)
  - as a side note, the battery warning light also works again - rv8flyboy 2008-10-25 21:36:23 (18 views)
- have you checked the wire from alternator to B+? (url) - shogun 2008-10-19 23:30:17 (40 views)
- Re: voltage regulator, no charging - rv8flyboy 2008-10-19 21:04:36 (18 views)
  - as for the foglight warning - shogun 2008-10-19 23:10:26 (32 views)
    - Re: as for the foglight warning - rv8flyboy 2008-10-20 12:15:23 (19 views)

Brake Pads: Hawk or Wagner brand?? Which would be better recommended!! - beach911 2008-10-24 17:24:41 (31 views)
- Raybestos TQ (thermal quiet) about $30 per corner (nt) - DG740I 3/93 2008-10-25 10:32:52 (32 views)
  - correction Raybestos QS (quiet stop) very minimual dust (nt) - DG740I 3/93 2008-10-25 12:51:59 (27 views)
- I have Hawk on my Z-28 Camaro and if you don't like - windhund 2008-10-25 06:39:59 (30 views)

Cluster board swap for an 88 735i - titanium330 2008-10-24 20:06:19 (29 views)
- there are grey, white and blue clusters (url) - shogun 2008-10-24 20:24:51 (53 views)
  - Re: there are grey, white and blue clusters - titanium330 2008-10-25 09:19:00 (23 views)

Just bought an 89 735i - intense735i 2008-10-24 11:18:40 (53 views)
- Re: Just bought an 89 735i - Isiah 90-735il 2008-10-24 23:12:53 (20 views)

Where can I buy this wooden shift knob? (pic) - bronze7 2008-10-24 15:33:14 (93 views)
- Try ebay and I have also seen them on Bavauto.com! (nt) - beach911 2008-10-24 17:17:52 (24 views)

what do these compression numbers mean - christophe68 2008-10-24 03:04:08 (82 views)
- Regardless of the root cause, head needs to come off - erwin 2008-10-24 15:53:31 (48 views)
- my take on the readings - hairywithit 2008-10-24 05:24:10 (61 views)

M70 B50 engine technical data - shogun 2008-10-24 10:21:41 (57 views)

back to the original question ...Can I - Paparon 2008-10-22 14:31:31 (26 views)
- Re: back to the original question ...Can I - kfister 2008-10-22 15:05:23 (31 views)
  - Re: back to the original question ...Can I - Paparon 2008-10-22 15:40:49 (28 views)
    - Re: back to the original question ...Can I - rv8flyboy 2008-10-22 18:56:37 (24 views)
    - I don't think so, Paparon - Patrick C 88 750 160K 2008-10-22 17:17:57 (33 views)
      - bolt and flange must come off - shogun 2008-10-23 01:45:11 (19 views)
        
        make yourselves a counter holder (long) (url) - shogun 2008-10-23 07:10:41 (41 views)
        
        750: M18x1.5 100Nm then 60 degrees, then 60 degree - Patrick C 88 750 160K 2008-10-23 16:43:03 (29 views)
        
        thanks, Pat, nice idea with bathroom scale (nt) - shogun 2008-10-23 22:39:28 (14 views)

750iL car choices - jibsheet 2008-10-23 19:15:41 (53 views)
- all L = long version have self levelling at the rear - shogun 2008-10-23 22:37:22 (73 views)

Fuse #9 blows in cold weather 15 volt - AKneppers 2008-10-23 11:20:45 (26 views)
- Isn't rear defroster in fuse 46's circuit? (pic) (url) - Patrick C 88 750 160K 2008-10-23 16:24:34 (58 views)
  - yes, but #9 also, as 9 is for the IHKA unit (url) - shogun 2008-10-23 19:11:35 (37 views)
- rear window defogger/defroster repair (url) - shogun 2008-10-23 11:40:20 (48 views)

No start after sitting - queball 2008-10-23 14:42:30 (45 views)
- Floor the gas pedal when trying to start it next time - Rich 1990 750iL 2008-10-23 17:02:39 (24 views)
- or may be water is in the gas tank (nt) - bronze7 2008-10-23 16:17:36 (32 views)
- Couple of possibilities - Patrick C 88 750 160K 2008-10-23 16:04:07 (44 views)

Herb's cupholders part III (url) - shogun 2008-10-23 10:33:51 (50 views)

Info Screen No Text - geerhed 2008-10-21 19:59:07 (36 views)
- Smack the dash with the palm of your hand - hvacdude 2008-10-22 21:40:12 (15 views)
  - Tried that. - geerhed 2008-10-23 08:58:01 (11 views)
- I just had that happend to mine, probably - Patrick C 88 750 160K 2008-10-21 20:55:19 (24 views)
  - start with changing the bulbs behind the check control (nt) - shogun 2008-10-21 21:46:39 (14 views)
    - No, I believe the bulbs are OK - geerhed 2008-10-21 21:58:52 (19 views)
      - To Further Complicate the Matter.. - geerhed 2008-10-22 08:04:20 (27 views)
        
        On at start, off after 10 miles or so.. - geerhed 2008-10-22 17:15:14 (17 views)
        Duh - forgot how to upload pics: (pic) - geerhed 2008-10-22 08:15:25 (65 views)
        
        Sometimes mine does that. - nostness 2008-10-22 14:18:57 (18 views)
      - then start resoldering-here some pics (url) - shogun 2008-10-21 22:53:37 (51 views)
        
        What if there are 'dead' pixels in the cluster display or the OBC display? - bcweir750 2008-10-21 23:36:13 (31 views)
        
        That may be a problem.. - geerhed 2008-10-22 07:57:24 (29 views)
        
        could be the capacitors that need resoldering too (nt) - alv12 2008-10-22 19:28:19 (21 views)
        
        My capacitors have already been replaced. (nt) - bcweir750 2008-10-22 20:57:46 (13 views)
        
        Yeah, mine too. - geerhed 2008-10-22 21:26:23 (14 views)

1-brake-light warning traced to CCM module (url) - Patrick C 88 750 160K 2008-10-21 20:45:49 (189 views)
- copy George Mann's info on the CCM resistors (url) - shogun 2008-10-21 22:26:50 (67 views)
  - CCM resoldering - ESD regelt? (url) - shogun 2008-10-21 22:41:04 (74 views)
    - Re: CCM resoldering - ESD regelt? - rick540 2008-10-23 02:47:35 (37 views)

How much PAG compressor oil for R134? - oliverr871 2008-10-21 12:49:14 (20 views)
- 8 oz (url) - Patrick C 88 750 160K 2008-10-21 18:37:58 (23 views)
  - how much did you pay for remanufacturing the compressor? - shogun 2008-10-21 19:06:19 (16 views)
    - $220, this includes shipping and tax. - Patrick C 88 750 160K 2008-10-21 20:58:19 (22 views)
      - How did you find out about this place? I live in So Cal.... - oliverr871 2008-10-21 21:38:45 (13 views)
        
        Was referred to by a fellow at Santech - Patrick C 88 750 160K 2008-10-22 20:36:52 (14 views)
        
        Oh okay, so you got an old compressor and just gave it to them? - oliverr871 2008-10-22 22:02:50 (17 views)

Removing MAF/DK plug causes car to stall? - oliverr871 2008-10-21 13:09:18 (31 views)
- Possible that your 750 is running on cyl#1-6 only - Patrick C 88 750 160K 2008-10-21 17:28:10 (38 views)
  - Ok, so I decided to troubleshoot.... - oliverr871 2008-10-21 21:37:10 (24 views)
    - I probably mis-spoke about the raw fuel smell - Patrick C 88 750 160K 2008-10-22 20:21:17 (25 views)
    - So I wanted to confirm.... - oliverr871 2008-10-21 21:42:44 (21 views)
      - Re: So I wanted to confirm.... - hvacdude 2008-10-22 21:45:28 (18 views)
      - Correct. If you want one more layer of verification - Patrick C 88 750 160K 2008-10-22 20:08:27 (19 views)
        
        Thanks Patrick! One thing though, I disconnecte the fuel lines... - oliverr871 2008-10-22 21:58:36 (20 views)
      - Autohaus Arizona has Bosch fuel pumps on discount (url) - shogun 2008-10-21 22:06:22 (30 views)
  - as Patrick said, runs on 6 cylinders only (url) - shogun 2008-10-21 19:00:50 (20 views)

A Question for Johan about front main seal - Paparon 2008-10-21 21:54:07 (42 views)
- Will the M30 hub holder and 36mm socket fit the M70? (url) - Greg in Ypsi, MI 2008-10-22 09:42:40 (27 views)
  - Nice tool, could have used it for my attempt at lower chain cover. - daryl12 91 735iL 2008-10-22 16:38:53 (13 views)
- The seal is behind the crank pulley so you have to remove it (nt) - oliverr871 2008-10-21 22:57:41 (27 views)
  - Re: The seal is behind the crank pulley so you have to remove it - Paparon 2008-10-21 23:07:12 (29 views)
    - here is a shot of the ginat nut (pic) - Paparon 2008-10-21 23:11:25 (187 views)
      - I am surprised that the CPS still worked - shogun 2008-10-21 23:29:22 (40 views)
        
        It's a closed unit and oil doesn't impact the sensors working (nt) - Johan750 2008-10-22 11:29:40 (22 views)
        440 Nm torque & 'torque to yield' (url) - hairywithit 2008-10-22 08:47:10 (35 views)
        
        Yeah, BUT, THAT engine was out of the car when those tools were used. (nt) - rv8flyboy 2008-10-22 11:38:34 (16 views)
        
        Re: Yeah, BUT, THAT engine was out of the car when those tools were used. - Paparon 2008-10-22 15:48:51 (25 views)
        
        I used 3/4' 2 ft breaker and 5 ft pipe, - Patrick C 88 750 160K 2008-10-22 16:42:38 (23 views)

Valve settings for the M30 - daryl12 91 735iL 2008-10-21 21:56:30 (37 views)
- Gale has a detailed write-up with pics (url) - shogun 2008-10-21 22:11:25 (39 views)
  - Thanks Shogun, I used his directions for setting the vavles - daryl12 91 735iL 2008-10-21 22:15:30 (26 views)
    - Yes, go through them all twice - Greg in Ypsi, MI 2008-10-22 09:53:03 (24 views)
      - Thanks Greg, thought I may have set them to .030 but - daryl12 91 735iL 2008-10-22 16:32:47 (22 views)
- Re: Valve settings for the M30 (pic) - kfister 2008-10-21 22:10:24 (74 views)
  - Re: Valve settings for the M30 - cvillebimmer 2008-10-22 09:21:49 (30 views)
    - Typo meant 0.30mm cold - daryl12 91 735iL 2008-10-22 13:02:24 (20 views)
  - Hey Ken I was just sending you a email - daryl12 91 735iL 2008-10-21 22:13:08 (20 views)

For gert (pic) - Paparon 2008-10-21 22:46:04 (140 views)
- Re: For gert - rv8flyboy 2008-10-22 12:16:43 (25 views)

time for new shocks/struts : OEM or aftermarket? - whiteghost 2008-10-17 22:26:47 (65 views)
- Re: time for new shocks/struts : OEM or aftermarket? - gale 2008-10-18 21:28:00 (74 views)
  - Re: time for new shocks/struts : OEM or aftermarket? - whiteghost 2008-10-19 12:16:02 (33 views)
    - Re: time for new shocks/struts : OEM or aftermarket? - gale 2008-10-19 23:29:52 (38 views)
      - still have them? - whiteghost 2008-10-22 10:09:32 (22 views)

car still stalling help please! - ibsailor 2008-10-18 19:25:53 (51 views)
- Have you changed CPS? - Patrick C 88 750 160K 2008-10-19 18:11:55 (43 views)
  - Re: Have you changed CPS? - ibsailor 2008-10-21 03:54:47 (30 views)
  - original post is here, Patrick (url) - shogun 2008-10-19 18:58:57 (35 views)
    - Thanks Shogun, some other possibilities are - Patrick C 88 750 160K 2008-10-21 19:07:25 (24 views)

Anyone use any fuel additive or oil additive in their e32? - beach911 2008-10-19 23:14:03 (61 views)
- Re: Anyone use any fuel additive or oil additive in their e32? - DAGERM50 89 750IL 9/88 2769010 2008-10-21 13:15:35 (29 views)
- Re: Anyone use any fuel additive or oil additive in their e32? - voodoomarie 2008-10-21 13:15:14 (14 views)
- I use STP and a can of carb cleaner via the throttle body. - JeffChia 2008-10-20 21:51:59 (42 views)
- Lucas Products top cylinder lubricant/injector cleaner - bimmermeister 2008-10-20 21:38:03 (48 views)
- use their oil for the engine their jectron for the injectiors - alv12 2008-10-20 21:17:50 (19 views)
- Gas tank only - kfister 2008-10-20 17:32:56 (48 views)
  - I've been using Red Line D4 in my transmission 5 yrs, Indy tech I - DG740I 3/93 2008-10-21 10:42:48 (32 views)
  - Big fan of Seafoam!! (nt) - beach911 2008-10-21 01:09:33 (31 views)
- Techron twice a year in fuel nothing in the oil (nt) - DG740I 3/93 2008-10-20 15:13:39 (27 views)
- I've used Gumout fuel injector cleaner on a few occassions. No apparent harm. (nt) - davidc 2008-10-20 13:10:19 (29 views)
- fuel and oils already have additives, no need additionally IMHO (nt) - shogun 2008-10-20 00:45:27 (34 views)
  - I use some,, - wolf750i 2008-10-21 02:53:38 (17 views)

is there a way to have the cluster info 'on' by default? - boarddrafter 2008-10-21 12:50:39 (40 views)
- Re: is there a way to have the cluster info 'on' by default? - Johan750 2008-10-21 13:01:26 (38 views)

PDC e32 730i '92 euro auto m60/b30. - dropbear 2008-10-18 01:59:39 (36 views)
- I don't think the problem is with your PDC module - Nick (Australia) 2008-10-18 04:12:17 (34 views)
  - Re: I don't think the problem is with your PDC module - dropbear 2008-10-18 20:35:22 (23 views)
    - I'd go to a mechanic and get a diagnostic scan done - Nick (Australia) 2008-10-21 09:53:46 (9 views)
  - Re: I don't think the problem is with your PDC module - dropbear 2008-10-18 19:38:38 (22 views)

Here are pics of the decal I had put on my car like we talked about 2 months ago (pic) - beach911 2008-10-19 23:08:34 (189 views)
- Updated pics of the new color decal fender strip (pic) - beach911 2008-10-20 19:46:01 (100 views)
  - That one looks a lot better - erwin 2008-10-21 00:56:10 (21 views)
    - Let me give it a good washing before I post my dirty girl again! (nt) - beach911 2008-10-21 01:10:58 (14 views)
- It helps that beach's car is already one of Germany's three national colors... - bcweir750 2008-10-20 13:44:25 (27 views)
- Re: Here are pics of the decal I had put on my car like we talked about 2 months ago - bmw740jor 2008-10-20 04:40:04 (34 views)
  - Yep its all wood steering wheel and had it custom made from a guy off ebay (pic) - beach911 2008-10-20 19:42:15 (71 views)
    - which steering wheel guy? - 740gti 2008-10-21 03:29:09 (19 views)
      - decals looks nice..... (nt) - eliasazem 2008-10-21 05:18:20 (14 views)

I guess this is bad...? (pic) - r0x 2008-10-17 18:32:45 (207 views)
- It certainly looks bad... but it's repairable - erwin 2008-10-21 01:39:52 (21 views)
- Re: I guess this is bad...? - kfister 2008-10-17 18:48:18 (50 views)
  - not good but -- no reason to scrap -- just yet - hairywithit 2008-10-18 06:05:53 (59 views)
    - Re: not good but -- no reason to scrap -- just yet - wolf750i 2008-10-21 02:51:07 (12 views)

Hollow sound when backing up - AKneppers 2008-10-20 21:31:04 (28 views)
- You mean like a rubbing sound? - erwin 2008-10-21 00:47:10 (23 views)
- I know there's a halloween joke in there somewhere... - erwin 2008-10-21 00:39:31 (16 views)

REPLACE MY SPEEDOMETER - jeffer 2008-10-20 23:41:32 (35 views)
- your 7 is E23, here you are in the E32 forum - shogun 2008-10-20 23:47:20 (25 views)
  - Re: your 7 is E23, here you are in the E32 forum - jeffer 2008-10-20 23:56:08 (28 views)

swaybar links - Layne 2008-10-20 22:29:29 (27 views)
- only the OEM sway bars have the air diverters - shogun 2008-10-20 22:36:55 (23 views)
  - Thanks - Layne 2008-10-20 23:03:00 (16 views)

90 735i auto trans with dipstick... - jim740i 2008-10-19 20:37:26 (24 views)
- that is a ZF 4HP22 with the original dipstick - shogun 2008-10-19 22:59:17 (30 views)
  - shogun, Thanks for your reply. I just read in the owner's manual... - jim740i 2008-10-20 16:04:37 (28 views)
    - DEXRON III is the right one now for the ZF (url) - shogun 2008-10-20 19:31:12 (23 views)

Does our E32 Supports a Heater under the Wipers! - bmw740jor 2008-10-20 11:39:37 (73 views)
- Mine does as well, not that I need it in Southern Cal. - daryl12 91 735iL 2008-10-20 16:57:26 (30 views)
- Re: Does our E32 Supports a Heater under the Wipers! - eos 2008-10-20 16:25:42 (31 views)
  - that is standard, unless you have a non-OEM windshield (nt) - shogun 2008-10-20 19:25:46 (30 views)

750il Coolant rubber hose near Fire wall - 750il4u 2008-10-19 19:48:26 (48 views)
- the coolant expansion tank is held by 2 nuts - shogun 2008-10-19 23:23:14 (65 views)
  - Re: the coolant expansion tank is held by 2 nuts - 750il4u 2008-10-20 15:11:34 (29 views)

Hey shogun did all your tools arrive to you safely? - beach911 2008-10-19 23:20:15 (23 views)
- yes, thanks again for your help - shogun 2008-10-19 23:40:50 (34 views)
  - As soon as one will be ready, I am the first one to order it! (nt) - gizi 2008-10-20 14:54:28 (15 views)

Question for keyholders (pic) - ooroo 2008-10-18 04:21:31 (104 views)
- just drill into the plastic a 2nd new hole - shogun 2008-10-18 09:15:19 (33 views)
  - pic 2nd hole drilled (url) - shogun 2008-10-19 04:45:33 (51 views)
    - Re: pic 2nd hole drilled - ooroo 2008-10-19 21:54:01 (24 views)

Ok we got $100 towards are goal of $400 for a beer can puller (url) - Paparon 2008-10-18 14:04:42 (64 views)
- Re: Ok we got $100 towards are goal of $400 for a beer can puller (url) - bronze7 2008-10-18 16:06:23 (39 views)
  - bronze7, yours is for front arm bushings (url) - shogun 2008-10-18 18:42:34 (41 views)
    - Thanks for the correction. - bronze7 2008-10-19 03:18:18 (19 views)
    - Re: bronze7, yours is for front arm bushings - rv8flyboy 2008-10-18 21:02:40 (36 views)
      - steering arm + pitman arm could have some play (url) - shogun 2008-10-18 23:09:37 (50 views)
        
        Re: steering arm + pitman arm could have some play - rv8flyboy 2008-10-19 18:53:46 (31 views)
        Re: steering arm + pitman arm could have some play - rv8flyboy 2008-10-18 23:51:35 (32 views)

Changing Spark Plugs - 750il4u 2008-10-19 12:49:31 (50 views)
- Re: Changing Spark Plugs - Patrick C 88 750 160K