The 7 Series E32 Forum

sticky: How to add a photo to your signature. (url) - DavidC 2009-04-07 01:21:03 (29026 views)

sticky: How to upload and insert photos into messages (pic) (url) - DavidC 2009-02-15 10:02:42 (29216 views)

sticky: The electronic parts catalogue from BMW + VIN decoding (url) - shogun 2011-08-21 08:34:10 (1376 views)

sticky: Welcome to Newbies: Please Read Before Posting (url) - shogun 2005-09-24 14:17:11 (14183 views)

to help Roland2 and the community - hairywithit 2012-05-16 21:49:34 (6 views)
- If it is the same for both the 4HP22 & 24 - whiteghost 2012-05-17 01:48:47 (2 views)
  - Drive Shaft 24211217294 on 4HP24 only for M70 engine (url) - shogun 2012-05-17 04:06:13 (6 views)
    - What in the world is a 4HP33? (nt) - bcweir750 2012-05-17 05:59:55 (0 views)

E32 735i '92 acting up... - hugejp 2012-05-16 13:53:01 (14 views)
- Ignition coil or CPS on their way to being kaput? (nt) - whiteghost 2012-05-17 01:50:34 (5 views)
- Fuel filter? (nt) - htrdbmr 2012-05-16 15:37:17 (6 views)

H ow do you do a torque converter test.. (pic) - roland2 2012-05-09 17:24:13 (55 views)
- Re: There is a is link - roland2 2012-05-10 03:15:58 (40 views)
  - Re: There is a is link - rv8flyboy 2012-05-10 08:37:48 (39 views)
    - Re: Test TC - joecer 2012-05-11 06:33:51 (27 views)
      - Re: Pistons and clutch pack springs - roland2 2012-05-12 09:57:50 (19 views)
        
        Re: clutch pack springs - joecer 2012-05-13 06:21:41 (11 views)
      - Re: That what is wrong. - roland2 2012-05-11 18:04:13 (21 views)
        
        the main gasket for the main plate in valve body (url) - shogun 2012-05-11 20:40:19 (36 views)
        
        Re: It is now a torque converter problem - roland2 2012-05-12 09:29:19 (12 views)
        
        may not be possible but we would love to have a photo - hairywithit 2012-05-12 16:50:10 (15 views)
        
        Re: may not be possible but we would love to have a photo (pic) - roland2 2012-05-15 15:02:18 (15 views)
        Re: may not be possible but we would love to have a photo (pic) - roland2 2012-05-15 15:02:15 (13 views)
        
        More photos (pic) - roland2 2012-05-15 15:08:19 (19 views)
        
        many thanks for the photos - hairywithit 2012-05-15 23:28:33 (5 views)
        
        Re: many thanks for the photos (pic) - roland2 2012-05-16 04:54:26 (13 views)
        
        my bad, I could not imagine such wear/failure was even possible - hairywithit 2012-05-16 05:19:22 (12 views)
        
        My guess what could have hapened. (pic) - roland2 2012-05-16 16:08:47 (7 views)
        Re: my bad, I could not imagine such wear/failure was even possible - roland2 2012-05-16 06:06:28 (9 views)
        
        thanks, Roland, we will put your pics on the Shogun site (nt) - shogun 2012-05-16 06:29:33 (12 views)
        
        here are some torque conveter cut off pics-direct steel on steel contact (url) - shogun 2012-05-12 21:49:00 (29 views)
        
        Re: here are some torque conveter cut off pics-direct steel on steel contact - roland2 2012-05-16 06:07:58 (4 views)
        
        Just curious, but what grade emery cloth - vaced 2012-05-12 01:37:09 (11 views)

Servotronic torque converter testing?? - stevebu 2012-05-15 16:53:59 (8 views)
- Re: Servotronic torque converter testing?? - rv8flyboy 2012-05-15 20:03:16 (5 views)
  - oops, reading Shogun's essay - rv8flyboy 2012-05-15 21:09:25 (6 views)
- training manual page 21, item 4.4 says (url) - shogun 2012-05-15 18:26:43 (11 views)
  - Thanks for taking the time- - stevebu 2012-05-15 21:32:40 (5 views)
    - I revised the google translation - shogun 2012-05-15 23:17:22 (5 views)
      - Makes sense now. Thank you so much! (nt) - stevebu 2012-05-16 07:42:00 (3 views)

and i was having so much fun..... (pic) - rv8flyboy 2012-05-10 10:46:06 (169 views)
- Sorry to hear about your misfortune - whiteghost 2012-05-13 15:49:28 (25 views)
  - Re: Sorry to hear about your misfortune - whiteghost 2012-05-15 02:24:53 (6 views)
    - Update......Update...... - rv8flyboy 2012-05-15 16:18:50 (32 views)
      - That's great news that it is being saved! - whiteghost 2012-05-16 03:57:29 (10 views)
        
        It's fine if we can't get an 'edit' or 'delete post' function... - bcweir750 2012-05-16 04:46:40 (6 views)
- Glad you're okay - vaced 2012-05-12 01:48:37 (19 views)
- That's what we call 'klote' - Johan750 2012-05-11 10:31:57 (32 views)
  - Re: That's what we call 'klote' - rv8flyboy 2012-05-11 14:08:00 (40 views)
- Re: and i was having so much fun..... - Hitmanx 2012-05-11 02:08:19 (39 views)
  - sounds like a plan - rv8flyboy 2012-05-11 10:08:47 (37 views)
- Let them 'total' it... - hvacdude 2012-05-10 22:19:12 (29 views)
- - Jerome 2012-05-10 14:16:59 (20 views)
- Re: and i was having so much fun..... - htrdbmr 2012-05-10 13:12:55 (34 views)
  - could have been much worse - glad you are ok (nt) - hairywithit 2012-05-10 19:43:40 (18 views)
    - Re: could have been much worse - glad you are ok - rv8flyboy 2012-05-10 21:39:54 (25 views)
  - Re: and i was having so much fun..... - rv8flyboy 2012-05-10 14:13:59 (45 views)
    - Let me guess - was the Taurus following too closely... - bcweir750 2012-05-10 19:28:36 (30 views)
      - Thanks, i think u 3rd guess was correct - rv8flyboy 2012-05-10 19:58:12 (41 views)
        
        Had similar damage in 2006, costed $2900 - Patrick C 88 750 170K 2012-05-10 22:11:36 (28 views)
        
        At least your expenses were picked up - vaced 2012-05-12 01:47:10 (29 views)
        Re: Had similar damage in 2006, costed $2900 - rv8flyboy 2012-05-10 22:30:38 (22 views)
        
        Re: Had similar damage - joecer 2012-05-11 06:26:56 (49 views)
        
        Thanks Joecer! - rv8flyboy 2012-05-11 10:07:00 (39 views)
        
        Re: Thanks - joecer 2012-05-13 06:37:20 (21 views)
        
        if it makes you feel any better, that Taurus looks a lot worse off. - bcweir750 2012-05-10 21:45:00 (29 views)
        
        His car does look ok, but the e32 is outdated when it comes to crash safety - Johan750 2012-05-11 10:39:44 (56 views)
        
        Is it? Its uniframe with crumple zones. All newer advances are in avoidance tech (nt) - sinij 2012-05-13 23:40:32 (11 views)
        
        Not all newer advances are in avoidance tech - Johan750 2012-05-14 11:42:08 (13 views)
        
        Re: Not all newer advances are in avoidance tech - steinway 2012-05-16 03:22:40 (4 views)
        
        Yes, but you don't have to pay to unfold a car - vaced 2012-05-12 01:50:17 (18 views)
        Re: His car does look ok, but the e32 is outdated when it comes to crash safety - bcweir750 2012-05-11 17:13:50 (24 views)

91 750 rear shocks - larryrhr 2012-05-15 15:56:55 (13 views)
- I have a pair of LAD rear shocks if you decide not to rebuild - whiteghost 2012-05-16 03:01:03 (6 views)
- you need to find the O-rings from a hydraulic shop (url) - shogun 2012-05-15 19:26:26 (9 views)

is my starter failing? - paulmer 2012-05-14 03:32:15 (19 views)
- could be a brush is sticking - rv8flyboy 2012-05-14 08:29:44 (16 views)
  - Re: a brush is sticking - joecer 2012-05-14 12:24:00 (21 views)
    - don't think it is that bad on the M60 engine (nt) - rv8flyboy 2012-05-14 13:55:00 (9 views)
      - Re: M60 engine - joecer 2012-05-14 21:10:10 (10 views)

Question for Shogun, (url) - bmw740jor 2012-05-14 12:33:47 (22 views)
- Too bad my name isn't shogun....but I'll answear anyway - Johan750 2012-05-14 14:28:15 (29 views)
  - Re: Too bad my name isn't shogun....but I'll answear anyway - bmw740jor 2012-05-14 16:32:33 (20 views)
    - Johan knows it better anyway (url) - shogun 2012-05-14 19:04:49 (17 views)

all plugs and locations - Component + signal information (url) - shogun 2012-05-13 21:32:54 (19 views)

cross front reinforment of E31 also fits on E32 (url) - shogun 2012-05-07 19:25:40 (68 views)
- i was thinking about this when i was working on my friends e31 (nt) - oliverr871 2012-05-12 11:00:06 (14 views)
- strut mount = strut brace across top of shock towers?? - rv8flyboy 2012-05-07 20:47:48 (45 views)
  - I was wondering the exact same thing. (nt) - Johan750 2012-05-13 06:26:05 (7 views)

E32 Electrical issue - hjcha 2012-05-12 06:41:21 (28 views)
- might be the drive away protection fuse (url) - shogun 2012-05-12 07:33:44 (26 views)
  - Re: might be the drive away protection fuse - hjcha 2012-05-12 22:26:23 (12 views)
    - Re: might be the drive away protection fuse - hjcha 2012-05-12 22:42:29 (10 views)
      - Re: might be the drive away protection fuse - hjcha 2012-05-12 22:57:44 (10 views)
        
        fusable links must be 2 - your car has alarm system OEM (url) - shogun 2012-05-13 01:56:49 (17 views)

ICV Bosch # - bmw740jor 2012-05-12 01:27:46 (11 views)
- ICV Bosch # and BMW numbers - shogun 2012-05-12 07:54:48 (11 views)

alternator - telecaster 2012-05-11 07:15:51 (29 views)
- Re: alternator (url) - hairywithit 2012-05-11 07:39:01 (33 views)
  - Re: alternator (pic) - telecaster 2012-05-11 10:55:17 (44 views)
  - Re: alternator - telecaster 2012-05-11 09:56:24 (27 views)
    - Re: alternator (pic) - telecaster 2012-05-11 10:53:13 (41 views)
    - YES - rv8flyboy 2012-05-11 10:02:02 (20 views)
    - yes, could be the voltage regulator - shogun 2012-05-11 09:59:33 (31 views)
      - Re: yes, could be the voltage regulator (pic) - telecaster 2012-05-11 10:58:22 (50 views)
        
        That's a beautiful red car, by the way! - bcweir750 2012-05-11 17:17:47 (22 views)
        
        Re: That's a beautiful red car, by the way! - telecaster 2012-05-12 02:46:42 (16 views)
        My sole nitpick.... - bcweir750 2012-05-12 00:24:32 (20 views)
        
        Re: My sole nitpick.... (pic) - telecaster 2012-05-12 02:55:16 (29 views)
        
        Oh my! the badge-itis is worse than I thought! - bcweir750 2012-05-12 06:40:38 (14 views)

OIL GUIDE TO ALL CARS, Interesting site. (url) - bmw740jor 2012-05-12 03:49:48 (35 views)

M30 Engine: What's Required to run it? - kazam 2012-05-12 02:12:34 (31 views)
- the functions of the Motronic (url) - shogun 2012-05-12 03:16:46 (16 views)

The last pictures of my 750 (pic) (url) - Johan750 2012-05-07 11:47:39 (129 views)
- what did you cut the chassis with? - hairywithit 2012-05-07 22:29:03 (36 views)
  - We used an oversize angle grinder - Johan750 2012-05-08 06:17:26 (29 views)
    - GOOD STUFF TO KNOW - hairywithit 2012-05-08 07:04:40 (35 views)
      - Re: GOOD STUFF TO KNOW - Johan750 2012-05-08 08:05:28 (32 views)
        
        30 cm angle grinder disk? - shogun 2012-05-11 21:01:34 (16 views)
  - A sufficiently powerful metal saw would do the job. (nt) - bcweir750 2012-05-07 23:36:52 (24 views)
- The last two pictures which didn't show correct (pic) (url) - Johan750 2012-05-07 11:50:02 (107 views)
  - in the end it was an E32 Cabrio - shogun 2012-05-07 18:20:49 (38 views)
    - if we have to cut up one of the parts cars - hairywithit 2012-05-08 19:47:48 (31 views)
    - Re: in the end it was an E32 Cabrio - Johan750 2012-05-08 06:15:25 (51 views)

Slight head gasket leak- - stevebu 2012-05-01 21:26:46 (74 views)
- Time will tell- - stevebu 2012-05-11 13:59:40 (24 views)

Whats gone wrong wiith my gear box - roland2 2012-04-23 10:34:04 (83 views)
- Re: Whats gone wrong wiith my gear box - rv8flyboy 2012-04-23 12:36:05 (99 views)
  - Sorry it a 4 speed automatic transmission (nt) - roland2 2012-04-23 13:20:53 (78 views)
  - Re: Whats gone wrong wiith my gear box - roland2 2012-04-23 13:14:34 (76 views)
    - Re: Whats gone wrong wiith my gear box - joecer 2012-04-23 17:48:15 (72 views)
    - Re: Whats gone wrong wiith my gear box - rv8flyboy 2012-04-23 17:45:39 (71 views)
      - Re: Whats gone wrong wiith my gear box - roland2 2012-04-24 09:42:54 (73 views)
        
        Re: Whats gone wrong wiith my gear box - joecer 2012-04-24 21:31:59 (69 views)
        
        Re: Whats gone wrong wiith my gear box - roland2 2012-04-25 09:43:28 (68 views)
        
        there plenty writ-up's and pictorials on how to remove the tranny - rv8flyboy 2012-04-25 12:21:35 (69 views)
        there plenty writ-up's and pictorials on how to remove the tranny - rv8flyboy 2012-04-25 12:16:12 (62 views)
        Re: Whats gone wrong wiith my gear box - rv8flyboy 2012-04-25 12:07:23 (70 views)
        
        Re: Whats gone wrong wiith my gear box - joecer 2012-04-25 14:03:02 (74 views)
        
        Re: Whats gone wrong wiith my gear box - roland2 2012-04-26 12:36:42 (55 views)
        
        Re: Whats gone wrong wiith my gear box - joecer 2012-04-26 13:15:59 (58 views)
        
        Re: Whats gone wrong wiith my gear box - roland2 2012-04-26 13:39:07 (60 views)
        
        Changed plan, transmission is out. - roland2 2012-04-28 16:22:36 (54 views)
        
        Hope this helps (url) - bcweir750 2012-04-28 17:05:34 (80 views)
        
        Re: Hope this helps - joecer 2012-04-29 18:27:17 (57 views)
        
        Could this be my problem - roland2 2012-04-30 03:05:23 (63 views)
        
        Re: Could this be my problem - joecer 2012-04-30 22:55:36 (64 views)
        
        Re: Could this be my problem - roland2 2012-05-03 14:38:57 (62 views)
        
        here is the doc from Roland - shogun 2012-05-03 18:05:50 (52 views)
        
        Re: here is the doc from Roland - joecer 2012-05-04 06:23:31 (53 views)
        
        The pisto and housing are both Aluminum - joecer 2012-05-06 21:01:03 (29 views)
        i'd use a bucket of thin oil to prevent rust build-up in crevices (nt) - rv8flyboy 2012-05-04 10:01:28 (43 views)
        
        also, are the pump drive dogs still in place - rv8flyboy 2012-05-04 10:04:16 (49 views)
        
        Re: testing for torque (pic) - roland2 2012-05-09 17:14:57 (33 views)
        
        Re: testing for torque - rv8flyboy 2012-05-09 17:37:47 (35 views)
        
        Re: testing for torque - roland2 2012-05-09 17:56:22 (29 views)
        
        What rv8 flyboy is saying is that your 'test' doesn't reflect how TC operates - bcweir750 2012-05-09 21:18:05 (32 views)
        Like BC said - rv8flyboy 2012-05-10 08:33:33 (20 views)
        
        even if u don't see wear, the rings could have still worn enough - rv8flyboy 2012-04-30 08:55:03 (59 views)

broken door jam part...easy fix or hard? (pic) - gaffer5940 2012-04-14 14:40:28 (148 views)
- Re: broken door jam part...easy fix or hard? - e32express735i 2012-04-15 19:13:19 (68 views)
- Re: broken door jam part...easy fix or hard? - joecer 2012-04-14 19:00:03 (81 views)
  - Re: broken door jam part...easy fix or hard? - gaffer5940 2012-04-14 21:03:45 (112 views)
    - No need to replace the entire door. (pic) - bcweir750 2012-04-14 21:52:38 (104 views)
      - Re: No need to replace the entire door. - gaffer5940 2012-04-14 22:49:53 (79 views)
        
        No need to remove the big hinges. Correct. The back hinges stay on. - bcweir750 2012-04-14 23:07:48 (87 views)
        
        If it helps you feel better,my car has similar issue on driver's side front door - bcweir750 2012-04-14 23:58:43 (103 views)
        
        Re: If it helps you feel better,my car has similar issue on driver's side front door - gaffer5940 2012-05-09 08:55:56 (33 views)
        
        You need to be 'creative' when repairing the door brake! (pic) - gaffer5940 2012-05-09 15:24:21 (44 views)

switching to synthetic? - semar 2012-04-24 20:08:39 (82 views)
- Re: switching to synthetic? - hamburger 2012-05-08 20:30:59 (36 views)
  - I second using synthetic ATF for tranny, otherwise you won't make it past 250K. (nt) - sinij 2012-05-09 14:14:12 (29 views)
- Re: switching to synthetic? - semar 2012-04-29 01:09:45 (49 views)
- Re: switching to synthetic? - semar 2012-04-26 23:28:38 (53 views)
  - I don't see a difference in oil leaks - rv8flyboy 2012-04-27 09:54:38 (46 views)
  - Generally speaking, no. - bcweir750 2012-04-27 00:48:07 (55 views)
    - read this about oxidation and acid development (url) - shogun 2012-04-29 09:00:16 (52 views)
- 340K and last 200K on 10w40 synth here - sinij 2012-04-25 12:56:12 (56 views)
- Short answer is NO, you will NOT harm the engine - rv8flyboy 2012-04-24 21:06:53 (72 views)
  - Disregard previous post. Go with what rv8flyboy told you. - bcweir750 2012-04-24 21:23:37 (62 views)
    - 'This board REALLY needs a 'delete' or 'edit' function for posts' - shogun 2012-04-26 17:41:59 (55 views)
      - OK. No delete for posts, but how about at least an 'in post' edit function? - bcweir750 2012-04-26 22:06:04 (54 views)
- Do one or the other, but I don't recommend mixing the two. - bcweir750 2012-04-24 20:26:27 (55 views)

Visit the BimmerBoard Store on Amazon.com!

Help with M30 vibration/roughness at low rpm (url) - Jerome 2012-04-25 02:40:23 (89 views)
- M30 idle is generally a lost cause - sinij 2012-05-09 14:08:49 (33 views)
- spark plugs look good - are injectors ok then? - Jerome 2012-05-08 04:54:56 (31 views)
  - All that says is that your spark plugs are good. - bcweir750 2012-05-08 05:09:30 (37 views)
    - Don't even consider this !! - htrdbmr 2012-05-09 07:14:54 (37 views)
- Re: Help with M30 vibration/roughness at low rpm - htrdbmr 2012-04-27 14:29:25 (64 views)
  - coil connections look fine - no corrosion - Jerome 2012-05-08 04:37:49 (24 views)
- M30 idle problems - what next - sinij 2012-04-25 12:38:07 (84 views)
  - Re: M30 idle problems - what next - Jerome 2012-04-25 13:06:42 (89 views)
    - yes - no major vacuum leaks (nt) - sinij 2012-04-25 22:17:08 (63 views)
  - link - M30 idle - sinij 2012-04-25 12:45:37 (72 views)
- Best to leave the AFM alone for now. - bcweir750 2012-04-25 03:17:12 (59 views)
  - Re: Best to leave the AFM alone for now. - Jerome 2012-04-25 12:22:51 (67 views)

work shop update - joecer 2012-05-08 18:59:33 (34 views)
- sounds all good. - hairywithit 2012-05-08 19:42:55 (26 views)

dead lock - terry740 2012-05-06 23:43:56 (41 views)
- all E32 have heated doorlock system - shogun 2012-05-07 06:18:32 (48 views)
  - Re: all E32 have heated doorlock system - terry740 2012-05-07 22:52:23 (29 views)
    - Personally I don't think the OBDII system makes much difference. - bcweir750 2012-05-08 04:15:05 (27 views)

What is this part doing in my lower front valve body. (pic) - roland2 2012-05-06 13:31:26 (90 views)
- i'd say it's a domed orrifice (pic) - rv8flyboy 2012-05-06 18:45:34 (72 views)
  - Re: i'd say it's a domed orrifice - roland2 2012-05-07 03:48:47 (33 views)
    - It Is a valve - roland2 2012-05-07 14:43:33 (34 views)
  - 7 mm and 11 mm long = yes, should be one of the orifices (url) - shogun 2012-05-06 20:22:54 (53 views)
    - Thank you all. - roland2 2012-05-08 04:10:40 (27 views)

E32 front as office desk (url) - shogun 2012-05-07 08:47:41 (91 views)
- expensive novelty (nt) - paulmer 2012-05-07 17:19:06 (22 views)
- You ordered one for u new garage? (nt) - rv8flyboy 2012-05-07 09:44:33 (27 views)
  - no space ;-) (url) - shogun 2012-05-07 10:11:37 (48 views)
    - No space?? - rv8flyboy 2012-05-07 16:58:39 (26 views)
    - You can always do your work in the back of the Highline (nt) - Johan750 2012-05-07 12:26:23 (37 views)
      - I love that spoiler on the back of the E32 grill. (nt) - bcweir750 2012-05-07 16:06:14 (27 views)

Went for alignment - rear camber out of spec - first culprit??? (pic) - UNCGQ 2012-05-05 12:04:07 (71 views)
- Am I missing something?? The REAR?? - rv8flyboy 2012-05-06 10:08:19 (57 views)
- Shot springs? - sinij 2012-05-06 01:01:36 (53 views)

Testing - roland2 2012-05-04 14:47:22 (65 views)
- Re: Testing - roland2 2012-05-04 15:01:51 (59 views)
  - Re: Testing - roland2 2012-05-04 15:31:41 (37 views)
    - Re: Testing (pic) - roland2 2012-05-04 15:50:51 (85 views)
      - the pressure is regulated by the valve body - shogun 2012-05-04 18:23:16 (57 views)
        
        technically the pressure is controlled by the EGS (pic) - rv8flyboy 2012-05-06 00:33:59 (9712 views)
        
        great stuff comes out of your check control, rv8flyboy (nt) - shogun 2012-05-06 07:03:40 (9701 views)
      - Just an FYI for future reference, Bimmerboard has a Test forum (pic) (url) - bcweir750 2012-05-04 18:07:29 (41 views)

Any recommendations on reman'd injectors? (url) - Jerome 2012-05-04 23:02:47 (52 views)
- 340K on original injectors - recondition/respray works well - sinij 2012-05-06 00:41:22 (40 views)
  - I had good luck with recon - mine were done 60K+ ago and still going. (nt) - sinij 2012-05-06 00:48:12 (29 views)
- Re: Any recommendations on reman'd injectors? - paulmer 2012-05-05 15:11:56 (37 views)
- Re: Any recommendations on reman'd injectors? - BadWrench 91 750iL 2012-05-05 13:57:20 (39 views)
  - Will steer clear of them then - Jerome 2012-05-05 14:34:29 (41 views)
- I have bought 'reman'd' injectors a few times - whiteghost 2012-05-05 02:09:13 (53 views)
  - All good points - Jerome 2012-05-05 03:26:59 (31 views)
- Not sure if this answers your questions, but it may be worth considering. (url) - bcweir750 2012-05-05 01:14:39 (39 views)

Now that I am gainfully employed again with a good paying job... (pic) - bcweir750 2012-04-14 22:56:14 (263 views)
- Excelent! Time get it up and running! I bet you can't wait. (nt) - Johan750 2012-04-15 08:53:45 (111 views)
  - Yes, although my very first parts purchases wont be directly related... - bcweir750 2012-04-15 11:11:40 (127 views)
    - no need to waste the money for another steering wheel - shogun 2012-04-15 18:09:31 (102 views)
      - Battery is certainly dead by now. - bcweir750 2012-04-15 22:38:38 (102 views)
        
        Re: Battery is certainly dead by now. (pic) - mikekap55 2012-04-17 03:09:32 (102 views)
        
        Grant is an aftermarket wheel manufacturer. - bcweir750 2012-04-17 05:18:04 (101 views)
        
        Steering wheel- - stevebu 2012-04-16 20:05:34 (83 views)
        
        No problem deferring to Shogun's advice or buying necessary tools. - bcweir750 2012-04-16 20:34:05 (83 views)
        
        necessary tools - shogun 2012-04-16 22:10:36 (79 views)
        
        As to tools. - Johan750 2012-04-17 15:19:53 (73 views)
        OK. What kind of tools will I need to resuscitate car that's been sitting 5 yrs - bcweir750 2012-04-16 22:34:10 (92 views)
        
        Incidentally, I built up my tool collection using the piecemeal method. - bcweir750 2012-04-16 22:38:46 (104 views)
        
        in any case a brake bleeder - shogun 2012-04-16 23:34:26 (82 views)
        
        one final note on hood shocks. - bcweir750 2012-04-17 00:48:05 (114 views)
        
        FYI - PVC pipe over the strut trick. - kwandrey 2012-04-18 21:39:53 (80 views)
        dont underestimate the usefullness of a broom stick (nt) - Johan750 2012-04-17 15:22:28 (103 views)
        
        I always used a 3-wood without a problem!! (nt) - Rich 1990 750iL 2012-04-18 10:48:50 (101 views)
        
        Re: one final note on hood shocks. (pic) - rv8flyboy 2012-04-17 09:38:47 (123 views)
        
        Re: one final note on hood shocks. - realtygary 2012-05-03 13:09:45 (45 views)
        thank you! That looks like an intriguing and clever idea! (nt) - bcweir750 2012-04-17 09:51:36 (99 views)
        
        And when u are done, u put them in the glovebox for emergencies (nt) - rv8flyboy 2012-04-17 11:24:01 (69 views)
        
        Re: one final note on hood shocks. - steinway 2012-04-17 07:18:34 (79 views)
        a Gas Charged Lift Support Clamp is safer then - shogun 2012-04-17 03:32:01 (81 views)
        
        Thank you Shogun! (nt) - bcweir750 2012-04-17 09:52:07 (96 views)
- Re: Now that I am gainfully employed again with a good paying job... - joecer 2012-04-15 07:01:30 (80 views)
  - That's the cool thing about photo-editing is that it's free. - bcweir750 2012-04-15 07:55:55 (116 views)
- Re: Now that I am gainfully employed again with a good paying job... - gaffer5940 2012-04-14 23:35:05 (78 views)
  - Thanks! - bcweir750 2012-04-14 23:56:33 (105 views)
    - Re: Thanks! - gaffer5940 2012-04-15 00:28:10 (79 views)
      - Responded via text message. (nt) - bcweir750 2012-04-15 00:58:43 (105 views)

Is it normal go relays to be hot? - 740gti 2012-05-03 09:43:35 (52 views)
- Re: Is it normal FOR relays to be hot? - 740gti 2012-05-03 09:45:19 (46 views)
  - Well you won't find any of that auto-correct nonsense on THIS website! (nt) - bcweir750 2012-05-03 11:01:41 (41 views)

virgin no longer - hairywithit 2012-04-21 17:53:25 (126 views)
- Aw come on! PHOTOS please! (nt) - bcweir750 2012-04-21 18:30:03 (99 views)
  - Here you are (pic) - Take 2012-04-23 07:39:58 (251 views)
    - This is a beautiful place! and functional garage! (nt) - Patrick C 88 750 170K 2012-04-23 14:23:16 (71 views)
      - What would the minimum ideal dimensions be for a garage... - bcweir750 2012-05-02 04:46:06 (55 views)
        
        your iL is 5024 mm long, 1845 mm wide, height 1400 mm (url) - shogun 2012-05-02 09:13:34 (51 views)
      - still too many E32 in the garden (url) - shogun 2012-04-23 21:26:27 (114 views)
        
        wives and parts cars - difficult all over the world :-) (nt) - steinway 2012-04-24 05:25:14 (54 views)
        Re: still too many E32 in the garden - bcweir750 2012-04-23 21:52:18 (81 views)
        
        lots of E32s are okay..How about a place with many ILLEGAL E32s? - inderasatrya 2012-05-02 08:25:34 (51 views)
    - Whoa! Wow! Awesome! That's what I'm talking about! - bcweir750 2012-04-23 08:04:13 (84 views)
      - need some recommendations on air compressors - shogun 2012-04-24 09:16:27 (68 views)
        
        Re: some recommendations on air compressors - joecer 2012-04-24 21:23:37 (51 views)
        Re: need some recommendations on air compressors - rv8flyboy 2012-04-24 09:59:40 (58 views)
        
        Re: need some recommendations on air compressors - htrdbmr 2012-04-24 13:14:21 (66 views)
        
        more than likely he has 3 phase power - rv8flyboy 2012-04-24 13:49:34 (49 views)
        
        The voltage Japan is 100 V, different from NA 120V - shogun 2012-04-24 20:02:30 (77 views)
        
        except, the 100 volt killed my TV - rv8flyboy 2012-04-24 20:53:30 (61 views)
        
        Don't feel bad. MY image could have done far more damage to electronic equipment (nt) - bcweir750 2012-04-24 21:25:17 (56 views)

need some tips of handling empty chassis - inderasatrya 2012-05-01 19:55:54 (56 views)
- moving an empty chassis (pic) (url) - shogun 2012-05-01 22:52:09 (88 views)
  - been there, done that - paulmer 2012-05-01 23:59:02 (48 views)
    - nice tips! really appreciated it. - inderasatrya 2012-05-02 08:08:38 (48 views)

Seems like my engine lost the get-up-and go instantly - BIRCH 2012-04-28 04:27:29 (50 views)
- need more info... - c00per11242001 2012-04-30 21:15:44 (43 views)
- Re: Seems like my engine lost the get-up-and go instantly - hairywithit 2012-04-28 19:01:28 (48 views)
  - I had that when a MAF went south, no other indications, - rv8flyboy 2012-04-30 23:03:54 (51 views)
    - no warning messages in the dash? (nt) - hairywithit 2012-05-01 00:58:29 (56 views)
      - Re: no warning messages in the dash? - rv8flyboy 2012-05-01 09:20:38 (49 views)
        
        never got around to it. - hairywithit 2012-05-01 10:20:45 (53 views)
        
        Re: never got around to it. - rv8flyboy 2012-05-01 10:37:32 (46 views)

I'm BAAAAAAACK - plbowler 2012-04-30 21:16:46 (76 views)
- Welcome back! (nt) - bcweir750 2012-04-30 21:38:23 (55 views)
  - tks (nt) - plbowler 2012-05-01 09:28:36 (55 views)
  - wow, no dead fuel pumps after 2 years storage, lucky (url) - shogun 2012-04-30 21:55:55 (63 views)
    - you guys have gone hi-tech!! - plbowler 2012-05-01 09:21:40 (50 views)

Key -driver door issue - grahambo 2012-04-28 09:36:29 (45 views)
- My two guesses would be either your door bracket is broken or bad lock solenoid - bcweir750 2012-04-28 15:14:19 (40 views)
  - plus maybe broken door wire loom (url) - shogun 2012-04-28 18:14:44 (55 views)
    - Re: plus maybe broken door wire loom - grahambo 2012-05-01 00:21:20 (60 views)
    - Shogun raises an excellent possibility. Same link in English (url) - bcweir750 2012-04-28 18:42:46 (43 views)

Still no power steering- - stevebu 2012-04-27 21:33:05 (48 views)
- Can you connect pressure gauges to low pressure and high pressure connections? (nt) - bcweir750 2012-04-27 21:39:38 (44 views)
  - Looking at the posted service stuff- - stevebu 2012-04-28 09:40:52 (34 views)
  - how? To high pressure connections? 140 bar..... (nt) - shogun 2012-04-28 08:08:44 (42 views)
    - I had a pdf somewhere that showed the tool and the testing procedure - rv8flyboy 2012-04-28 12:45:48 (35 views)
      - 32-13/9 shows function of valve in hydr. torque converter (url) - shogun 2012-04-28 18:12:41 (66 views)
        
        Lots of good info, thanks- - stevebu 2012-04-29 12:05:40 (45 views)
        
        the solenoid may be stuck open. (nt) - rv8flyboy 2012-04-29 20:02:16 (40 views)
        
        If I remove the TC- - stevebu 2012-04-30 08:52:08 (50 views)
        
        Re: If I remove the TC- - rv8flyboy 2012-04-30 08:57:13 (44 views)
        
        Thank you (nt) - stevebu 2012-04-30 12:53:19 (53 views)

modifying fan clutch with filling hole (url) - shogun 2012-04-28 20:31:57 (95 views)
- modifying torque conveter with drain plug (url) - shogun 2012-04-29 01:13:16 (66 views)
  - if worried about balance, install 2, 180 degrees opposed (nt) - rv8flyboy 2012-04-29 20:05:47 (44 views)
    - yep, that was one of the proposals (url) - shogun 2012-04-29 20:25:35 (39 views)
      - advantage of two plugs - rv8flyboy 2012-04-30 09:07:56 (50 views)

Been trying to get this 92 750iL fixed for some time now. - aureliaz3 2012-04-29 03:07:52 (70 views)

Sparks Electrodes - bmw740jor 2012-04-28 07:22:49 (42 views)
- cheapest is good enough - shogun 2012-04-28 08:07:08 (39 views)

Where can I find the part number for the lower portion of the 'facelift'.... - bcweir750 2012-04-26 22:02:31 (54 views)
- Trim panel left 51118114365, right 51118114366, item 27 (url) - shogun 2012-04-27 11:25:04 (61 views)
  - Thanks so much Shogun! (nt) - bcweir750 2012-04-27 17:08:20 (41 views)

Is there aTransmission Vent/Filter - BIRCH 2012-04-27 02:17:36 (53 views)
- Re: Is there aTransmission Vent/Filter - joecer 2012-04-27 10:48:46 (48 views)
- Vent is on the top, transmission filter is on the bottom. - bcweir750 2012-04-27 03:22:28 (53 views)

Anyone know where I might be able to find this part? - vaced 2012-04-25 07:35:22 (72 views)
- I found something myself - could anyone confirm it, though? (url) - vaced 2012-04-25 07:49:06 (62 views)
  - E34s use narrower rear seats, due smaller bodies on E34s. - bcweir750 2012-04-26 03:00:18 (52 views)
    - An E32 rear seat will not fit an E34. - bcweir750 2012-04-26 03:02:51 (52 views)
      - Yes they will - whiteghost 2012-04-26 16:08:24 (62 views)
        
        OT: I did see something very interesting today. - bcweir750 2012-04-26 17:56:50 (57 views)
        I believe you, but it would be a tight fit. - bcweir750 2012-04-26 17:40:38 (46 views)
        
        not all E32 have electric rear seats, BC - shogun 2012-04-26 17:49:55 (61 views)
        
        I pretty much made the assumption that short wheelbase E32's didn't. - bcweir750 2012-04-26 21:39:03 (56 views)
      - you still can get it from the dealer - shogun 2012-04-26 09:36:06 (52 views)

735 IL driveshaft knocking and vibration - remcoveenstra 2012-04-14 12:23:48 (89 views)
- probably the driveshaft center bearing (url) - shogun 2012-04-14 17:28:28 (145 views)
  - Re: probably the driveshaft center bearing - remcoveenstra 2012-04-15 05:56:28 (108 views)
    - Re: probably the driveshaft center bearing - remcoveenstra 2012-04-23 08:46:19 (65 views)
      - oxygen sensor / lambda sonde - shogun 2012-04-23 09:20:39 (64 views)
        
        Re: oxygen sensor / lambda sonde - remcoveenstra 2012-04-23 13:30:14 (66 views)

Tandem power steering rebuild? - stevebu 2012-04-22 11:18:11 (82 views)
- Re: Tandem power steering rebuild? - rv8flyboy 2012-04-22 13:39:24 (73 views)
  - Tandem power steering rebuild>>pics here (vid) (url) - shogun 2012-04-22 18:34:18 (88 views)
    - Thank you- I obviously didn't search enough - stevebu 2012-04-23 07:34:58 (65 views)

Found another SWORD, but - BIRCH 2012-04-23 04:17:36 (72 views)

Car pulls to the left (url) - hvacdude 2012-04-20 00:04:46 (93 views)
- Re: Car pulls to the left - kwandrey 2012-04-23 00:10:55 (61 views)
- Re: Car pulls to the left - rv8flyboy 2012-04-20 09:58:31 (70 views)
  - oops try that again (url) - rv8flyboy 2012-04-20 15:41:12 (91 views)
  - see here for strut checker tool (url) - rv8flyboy 2012-04-20 15:37:48 (89 views)
- Hope this doesn't sound like a dumb question, but... - bcweir750 2012-04-20 08:44:45 (71 views)
  - Re: Hope this doesn't sound like a dumb question, but... - stevebu 2012-04-20 12:46:28 (90 views)

interactive M70 fault tree (url) - hairywithit 2012-04-16 22:00:12 (114 views)
- that looks better than the original internal test version - shogun 2012-04-16 22:16:02 (80 views)
  - if the EGS goes bad, why would the EML shut down one bank - rv8flyboy 2012-04-17 10:26:20 (73 views)
    - when is limphome not full limphome? - hairywithit 2012-04-17 16:36:34 (103 views)
      - check the signal from the EGS. - rv8flyboy 2012-04-17 20:32:50 (77 views)
  - same query for EML light failure (nt) - hairywithit 2012-04-16 23:24:05 (115 views)
    - Re: same query for EML light failure - rv8flyboy 2012-04-17 10:23:13 (87 views)
      - CIS failure - hairywithit 2012-04-17 21:44:44 (77 views)
        
        Re: CIS failure - rv8flyboy 2012-04-17 23:00:59 (74 views)
        
        Spock raises his eyebrows - hairywithit 2012-04-17 23:23:35 (72 views)
        
        Spock raises his eyebrows, so does Hairy - rv8flyboy 2012-04-18 10:07:42 (76 views)
        
        so the duty cycle is cut to compensate but - hairywithit 2012-04-18 16:53:58 (79 views)
        
        Re: so the duty cycle is cut to compensate but - rv8flyboy 2012-04-19 09:34:23 (73 views)
        
        Shogun -- we need a scope (and someone who knows - hairywithit 2012-04-19 19:43:21 (68 views)
        
        Shogun -- send me a ticket and I''ll take some vacation to Nihon - rv8flyboy 2012-04-20 10:11:34 (68 views)
        
        you are welcome, first time we work in my new garage (nt) - shogun 2012-04-20 11:05:34 (68 views)
        
        I expect there will be a red carpet and a band. - hairywithit 2012-04-20 16:29:12 (69 views)
        
        ..along with parade consisting of every E32 Shogun has rescued from the crusher! - bcweir750 2012-04-21 07:47:13 (85 views)
      - wow, that is so strange - must be nonstandard - hairywithit 2012-04-17 16:34:37 (73 views)
        
        Re: wow, that is so strange - must be nonstandard - rv8flyboy 2012-04-17 20:30:58 (79 views)
        
        From: Bosch Motronic 1.1/1.3 - rv8flyboy 2012-04-17 20:46:27 (77 views)
        
        Bosch Motronic 1.1/1.3 - hairywithit 2012-04-17 21:41:25 (74 views)
        
        I found my copy-- just sent it out. (nt) - Patrick C 88 750 170K 2012-04-17 22:30:51 (75 views)
        
        got it - many thanks (nt) - hairywithit 2012-04-18 04:07:28 (99 views)
        
        he he he, we are working on Shogun's m70 this Saturday. - hairywithit 2012-04-17 20:40:02 (83 views)

Anti Lock light - ethirty2 2012-04-18 14:43:55 (81 views)
- Re: Anti Lock light - ethirty2 2012-04-19 00:06:34 (106 views)
  - Re: Anti Lock light - joecer 2012-04-19 17:16:05 (65 views)
- Re: Anti Lock light - joecer 2012-04-18 23:14:35 (115 views)
- Re: Anti Lock light - bcweir750 2012-04-18 15:50:34 (81 views)

OUCH my 7 is hurt - input to straighten Ft structure (pic) - kwandrey 2012-04-06 20:13:56 (234 views)
- straightening and ready to joust (pic) - kwandrey 2012-04-18 21:11:01 (91 views)
  - Joust w/me - pulled trigger early I have more pics (pic) - kwandrey 2012-04-18 21:15:09 (133 views)
- Similar thing happened here - vaced 2012-04-15 20:08:55 (83 views)
- what happened here (nt) - paulmer 2012-04-06 21:45:28 (88 views)
- Re: OUCH my 7 is hurt - input to straighten Ft structure (pic) - kwandrey 2012-04-06 20:15:56 (185 views)
  - Re: OUCH - joecer 2012-04-07 07:14:10 (148 views)
    - Re: OUCH (pic) - e32express735i 2012-04-07 12:11:18 (137 views)
      - Question now is how much MORE money do you feel comfortable putting into it? - bcweir750 2012-04-15 22:55:03 (80 views)

A graph of the number of 750i in the UK - rabbit 2012-04-16 01:51:23 (105 views)
- Re: A graph of the number of 750i in the UK - ryder 2012-04-17 14:41:01 (100 views)
  - Re: A graph of the number of 750i in the UK - rabbit 2012-04-17 21:39:45 (84 views)
- Wow. Less than 50 registered V12 E32's in the UK! - bcweir750 2012-04-16 23:04:11 (106 views)
  - Depends where you live. Here in holland a 750i is more comon then a 750il - Johan750 2012-04-17 14:46:12 (103 views)
    - Officially the 750i was never exported here. - bcweir750 2012-04-17 18:14:43 (72 views)

help - gizi 2012-04-07 19:10:45 (122 views)
- Can somebody tell what should be the length of the tranny dipstick in 735? 750 (nt) - gizi 2012-04-17 19:37:58 (94 views)
- Tranny over fill - gizi 2012-04-17 17:21:16 (71 views)
  - is it coming from the top or the bottom of the fill tube? - bcweir750 2012-04-17 17:34:51 (64 views)
    - Re: is it coming from the top or the bottom of the fill tube? - gizi 2012-04-17 19:36:28 (62 views)
- are u sure it is the tranny dip stick?? - rv8flyboy 2012-04-09 11:44:17 (74 views)
  - I agree, sounds like the tranny has too much fluid - Rich 1990 750iL 2012-04-09 12:40:40 (106 views)
    - How much oil one 735 tranny needs, 7 litres? (nt) - gizi 2012-04-09 17:43:13 (116 views)
      - 7.5 Ltr with torque converter, 3.0 Ltr without (nt) - shogun 2012-04-09 18:39:57 (115 views)
- Re: help - joecer 2012-04-09 10:43:45 (97 views)
  - Re: help - joecer 2012-04-10 07:25:04 (87 views)
  - It can be - gizi 2012-04-09 16:55:03 (100 views)

Intake manifold gasket? - 740gti 2012-04-16 18:58:02 (80 views)
- Re: Intake manifold gasket? - hwj 2012-04-17 17:33:27 (102 views)
- could be the crankcase venting diaphram? (url) - hairywithit 2012-04-16 22:07:07 (108 views)
  - Thanks - 740gti 2012-04-16 23:50:31 (94 views)
    - umm, remember that the crankcase venting - hairywithit 2012-04-17 00:17:06 (104 views)

Genuine BMW Illuminated Gear Indicator Cover E32 (url) - bmw740jor 2012-04-17 12:34:11 (150 views)
- installation of the cover is fairly straightforward. - bcweir750 2012-04-17 17:25:49 (73 views)

where to learn Concours-class bodyworking skills? - inderasatrya 2012-04-17 00:18:22 (105 views)
- Not sure if the same idea would work in your area... - bcweir750 2012-04-17 01:11:06 (97 views)
  - no, thanks. - inderasatrya 2012-04-17 02:46:44 (94 views)
    - Community colleges or vocational schools are the only other sources I know of (nt) - bcweir750 2012-04-17 02:49:12 (93 views)
      - Also bookstores, the Web, and Youtube. (nt) - bcweir750 2012-04-17 02:50:46 (111 views)

DIY throttle cable replacement M60 (url) - shogun 2012-04-17 00:11:59 (80 views)

wire plug in - kjsphotos 2012-04-13 07:51:00 (118 views)
- Re: wire plug in - kjsphotos 2012-04-16 23:04:07 (89 views)
- We need details to help you - shogun 2012-04-16 17:43:35 (67 views)

Another fine example of Meyle engineering (pic) - Johan750 2012-04-13 14:01:35 (161 views)
- new one is about 5-6 mm shorter centerline to centerline? (nt) - hairywithit 2012-04-15 18:29:24 (117 views)
- I am blind. What is the difference? (nt) - oliverr871 2012-04-15 10:13:28 (99 views)

how to unlock doors with disconnected battery? - steinway 2012-04-10 10:12:32 (83 views)
- confused, u don't have the keys?? - rv8flyboy 2012-04-10 15:54:34 (78 views)
  - Re: confused, u don't have the keys?? - steinway 2012-04-10 16:59:06 (109 views)
    - Re: confused, u don't have the keys?? - rv8flyboy 2012-04-10 19:49:29 (83 views)
    - emergency unlock always works, even with no battery in car - shogun 2012-04-10 18:31:58 (120 views)
      - OK - I'll try that - steinway 2012-04-11 03:35:59 (70 views)
        
        if doube locked, coat hanger will not help (url) - shogun 2012-04-11 04:15:05 (83 views)
        
        solved - steinway 2012-04-14 08:31:13 (68 views)
        Youtube video showing manual unlock passenger dr (vid) (url) - Patrick C 88 750 170K 2012-04-11 22:53:15 (110 views)
        thanks - steinway 2012-04-11 10:41:27 (69 views)
        after battery removal, one cannot double lock anymore (nt) - rv8flyboy 2012-04-11 10:22:49 (76 views)

Will Programma A/C Limit Switch (Sword) - BIRCH 2012-04-09 16:43:38 (97 views)
- 2 versions, Siemens and Behr (url) - shogun 2012-04-09 17:30:36 (122 views)
  - Re: 2 versions, Siemens and Behr - BIRCH 2012-04-09 18:10:57 (105 views)
    - someone might have a spare one for you like whiteghost - shogun 2012-04-09 18:33:02 (111 views)
      - Re: someone might have a spare one for you like whiteghost - BIRCH 2012-04-11 16:42:37 (81 views)
        
        it's a resistor (url) - shogun 2012-04-11 18:50:24 (119 views)
        
        sorry, not resistor, transistor (url) - shogun 2012-04-14 07:28:16 (94 views)

I'm back! - 740gti 2012-04-12 23:23:52 (92 views)
- Parts ??? - rv8flyboy 2012-04-13 12:23:39 (108 views)
  - yeah, sorry! - 740gti 2012-04-13 17:46:02 (103 views)
- Welcome back! - bcweir750 2012-04-13 09:08:37 (103 views)

What is the consensus on polyurethane bushings? - paulmer 2012-04-08 22:08:53 (106 views)
- Why go to poly-urethane for the UCAB's?? - rv8flyboy 2012-04-09 09:54:25 (103 views)
  - Spherical bearings like heim joints? - 740gti 2012-04-12 23:31:18 (110 views)
    - kinda like heim joints, and never said they would be quieter - rv8flyboy 2012-04-13 09:31:54 (74 views)
      - That makes more sense - 740gti 2012-04-13 11:58:43 (99 views)
        
        when i got my car my UCABs were shot - rv8flyboy 2012-04-13 12:18:37 (74 views)
- 'What you need to know' (url) - shogun 2012-04-09 02:13:13 (132 views)
  - Re: 'What you need to know' (vid) - e32express735i 2012-04-09 07:20:18 (91 views)
  - Re: 'What you need to know' - joecer 2012-04-09 06:15:01 (123 views)

Will these tranny parts fit my 4hp22 (url) - ((((BIGANT)))) 2012-04-10 22:26:32 (96 views)
- very good prices for the parts - shogun 2012-04-10 23:15:08 (101 views)
  - ok will do thanks (nt) - ((((BIGANT)))) 2012-04-11 06:09:13 (97 views)
    - They have good prices and fast shipping, but very poor... - jim740i 2012-04-11 21:34:49 (68 views)

Different soft-close boot panelling (pic) - e32express735i 2012-04-11 00:40:18 (114 views)
- check for welding, maybe it was hit in the back and new panel was welded in - shogun 2012-04-11 06:05:30 (94 views)

BMW e32 (1987) rear fog lights not working - mrb10 2012-04-09 12:52:56 (89 views)
- yes, the rear fog lights are powered via the LKM (url) - shogun 2012-04-09 17:37:46 (78 views)
  - Re: yes, the rear fog lights are powered via the LKM - mrb10 2012-04-10 09:41:39 (103 views)
    - Re: yes, the rear fog lights are powered via the LKM - mrb10 2012-04-10 09:42:56 (104 views)
- Re: BMW e32 (1987) rear fog lights not working (pic) - rv8flyboy 2012-04-09 13:49:24 (112 views)
  - Re: BMW e32 (1987) rear fog lights not working (pic) - e32express735i 2012-04-11 01:50:27 (2527 views)
  - OOPS sorry answered wrong , missed the fog lite bit (nt) - rv8flyboy 2012-04-09 13:55:33 (2528 views)

PPPP msg - gizi 2012-04-10 16:45:57 (86 views)
- Re: PPPP msg - rv8flyboy 2012-04-10 16:52:31 (71 views)
  - Re: PPPP msg - gizi 2012-04-10 17:00:01 (104 views)

Cruise Control (pic) - xd45 2012-04-07 23:04:44 (155 views)
- Re: Cruise Control - mikekap55 2012-04-09 02:37:42 (112 views)
  - see component location chart+ component location view - shogun 2012-04-09 03:16:20 (85 views)
- Re: Cruise Control - xd45 2012-04-08 21:44:06 (112 views)
  - maybe the cable is partly broken inside the sleeve - shogun 2012-04-08 23:03:16 (110 views)
    - Re: maybe the cable is partly broken inside the sleeve - xd45 2012-04-09 15:34:18 (113 views)
- do you have the bushings? (url) - shogun 2012-04-07 23:37:11 (132 views)

Trans in limp mode - ((((BIGANT)))) 2012-04-07 08:44:03 (95 views)
- pinout (url) - shogun 2012-04-07 10:09:11 (149 views)
  - Thank you - ((((BIGANT)))) 2012-04-07 10:32:04 (121 views)
    - Saw where I am suppose to get readings lets see... - ((((BIGANT)))) 2012-04-07 17:27:36 (116 views)
      - ok MV2 I get low resistance - ((((BIGANT)))) 2012-04-07 18:23:46 (118 views)
        
        Anthony, clean up the valve body (vid) (url) - shogun 2012-04-07 23:35:18 (93 views)
        
        Perfect thx.. Missed a solenoid MV3 '0'resistance - ((((BIGANT)))) 2012-04-08 07:58:02 (115 views)