The 6 Series E24 Forum

Euro Bumpers for sale - jklnhyde 2007-06-29 08:41:05 (678 views)
- Re: Euro Bumpers for sale - kangrga 2008-01-05 01:06:18 (222 views)

1978 630 CS mods...help needed - jarni2 2007-03-13 03:58:58 (371 views)
- Re: 1978 630 CS mods...help needed - winfred 2007-10-19 23:53:47 (87 views)
- Frame are different so diff wont swap. Engine & trans are doable if - bmw635 2007-03-13 12:31:46 (283 views)
  - Re: Frame are different so diff wont swap. Engine & trans are doable if - jarni2 2007-03-14 02:23:13 (298 views)
    - E12 chasis has different front cross member/ suspension mount - bmw635 2007-03-14 13:43:37 (314 views)
      - Re: E12 chasis has different front cross member/ suspension mount - jarni2 2007-03-14 16:21:47 (254 views)
      - Re: E12 chasis has different front cross member/ suspension mount - jarni2 2007-03-14 16:21:37 (312 views)
        
        What country are you in? What's availab;e in your country so I can tell you the - bmw635 2007-03-14 16:36:11 (294 views)
        
        Re: What country are you in? What's availab;e in your country so I can tell you the - jarni2 2007-03-19 16:45:23 (290 views)
        
        M90 engine is 1977-81 ( 93.5mm bore x 84mm stroke), it's the same bottom end in - bmw635 2007-03-19 18:29:50 (339 views)
        
        Re: M90 engine is 1977-81 ( 93.5mm bore x 84mm stroke), it's the same bottom end in - jarni2 2007-03-21 02:34:14 (327 views)
        
        Motronic engine will fit in L-jet car with 1 mod: feed power to DME since the (url) - bmw635 2007-03-21 13:02:30 (309 views)
        
        BTW, the E12 exhaust manifold have to be used in newer engine since the exhaust - bmw635 2007-03-19 18:35:53 (274 views)

Have parts car - Shayne 2007-07-12 17:31:37 (428 views)
- Re: Have parts car - kurtaz 2007-09-26 14:40:15 (222 views)
- hi shayne - dr750 2007-09-23 10:32:38 (240 views)
  - Re: hi shayne - Shayne 2007-09-23 13:00:44 (228 views)

Exhuast System - downernsp 2007-01-20 02:07:55 (332 views)
- Re: Exhuast System - downernsp 2007-09-21 23:34:56 (57 views)
- If you want to know the exact results of each mod, yes, install them separately. - davidc 2007-01-20 02:38:26 (334 views)
  - Re: If you want to know the exact results of each mod, yes, install them separately. - downernsp 2007-01-20 04:43:48 (323 views)

Found a 1982 635Csi with strange interior... (pic) - jarni2 2007-03-28 10:15:43 (1336 views)
- Re: Found a 1982 635Csi with strange interior... - lew 2007-09-21 00:38:15 (162 views)
- 1982 635Csi would be gray market as it was not - beezer02 2007-07-09 23:01:24 (287 views)
  - Re: 1982 635Csi would be gray market as it was not - Keith in VA 2007-07-26 14:25:42 (220 views)
    - Re: 1982 635Csi would be gray market as it was not (pic) - jarni2 2007-08-03 13:15:03 (452 views)
- the top 3 pics don't show. - mrb10 2007-04-11 07:08:20 (334 views)
- Going to take some investigation. - kff 2007-03-29 08:57:56 (393 views)
  - Re: Going to take some investigation. - jarni2 2007-08-03 18:07:13 (156 views)
    - Base on the exterior, engine, and interior of the car, I'd bet it's a regular - bmw635 2007-08-04 10:47:45 (184 views)
- More pics for ID? Doesn't look like original. Euro cars did have cloth interior - bmw635 2007-03-28 11:54:48 (413 views)
  - Re: More pics for ID? Doesn't look like original. Euro cars did have cloth interior - jarni2 2007-03-28 11:59:02 (422 views)
    - The other 3 pics didn't show so I can't see. (nt) - bmw635 2007-03-28 12:39:51 (380 views)

Running hot/Coolant light on? (pic) - mbw635 2007-05-23 18:54:39 (639 views)
- Several things to check.... - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2007-09-18 07:25:37 (282 views)
- Re: Running hot/Coolant light on? - downernsp 2007-06-01 17:35:54 (429 views)
- Re: Running hot/Coolant light on? (pic) - Ken Mc Lean - 85 635CSi 2007-05-26 22:48:54 (515 views)
  - 75 and 71º t-stats are nothing but trouble... - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2007-09-19 07:40:32 (290 views)
- Re: Running hot/Coolant light on? (pic) (url) - cwsixer 2007-05-24 00:37:27 (528 views)
  - great link,thx (nt) - dr750 2007-05-27 08:32:12 (453 views)
- Re: Running hot/Coolant light on? - crovensto 2007-05-23 21:24:09 (475 views)
  - If it's not the gauge do a leak down test for bad head gasket. - bmw635 2007-05-24 00:37:28 (434 views)
    - Thanks - mbw635 2007-05-24 23:13:19 (406 views)
      - Running Hot: Problem Solved - mbw635 2007-09-16 21:03:32 (326 views)
        
        Hmm, too simple for too much headache. :-)) (nt) - bmw635 2007-09-18 01:47:55 (301 views)

e24/635CSi-1987/ Production date 09/1986-Autotran - kjkumar 2007-05-18 13:12:21 (359 views)
- Re: e24/635CSi-1987/ Production date 09/1986-Autotran - cdaley 2007-09-01 04:05:22 (314 views)
- Check for all intake leaks, don't forget couple small hoses under the intake (url) - bmw635 2007-05-22 11:34:26 (348 views)
  - Re: Check for all intake leaks, don't forget couple small hoses under the intake - kjkumar 2007-05-24 16:24:50 (292 views)

brake and temp gauge problem... help needed - jarni2 2007-05-12 01:57:21 (445 views)
- Re: brake and temp gauge problem... help needed - cwsixer 2007-05-24 01:38:01 (395 views)
  - Re: brake and temp gauge problem... help needed - jarni2 2007-08-03 13:12:31 (281 views)
    - E31 850 or E32 750 master would work and it's larger so it will give more brakin - bmw635 2007-08-03 13:20:00 (288 views)
      - Hello, The problem with brakes is still here.... - jarni2 2007-08-13 10:44:29 (255 views)
        
        Re: Hello, The problem with brakes is still here.... - jarni2 2007-08-13 10:51:28 (259 views)
        
        Don't know the problem you're having so post this on E23 forum as there's lot - bmw635 2007-08-15 15:32:49 (276 views)
        
        Re: Don't know the problem you're having so post this on E23 forum as there's lo - jarni2 2007-08-26 15:55:07 (243 views)
        
        Not sure if those are problems! Here's why: - bmw635 2007-08-26 19:18:40 (230 views)
        
        Re: Not sure if those are problems! Here's why: - jarni2 2007-08-27 15:36:14 (244 views)
        Re: Not sure if those are problems! Here's why: - jarni2 2007-08-27 04:19:10 (221 views)
        
        You have to bleed the fluid 1st as the warning light might be triggered by no (url) - bmw635 2007-08-27 16:33:47 (240 views)
        
        Re: You have to bleed the fluid 1st as the warning light might be triggered by n - jarni2 2007-08-30 14:06:30 (242 views)
        
        Probably bad #5 (dist valve). The O-ring leak on the servo is related to power - bmw635 2007-08-30 18:24:46 (260 views)
        
        Re: Probably bad #5 (dist valve). The O-ring leak on the servo is related to pow - jarni2 2007-08-31 14:44:41 (213 views)
        
        Try to post without sign up? I think you can. (nt) - bmw635 2007-08-31 15:17:06 (222 views)
        
        Correction #5 (proportioning valve). (nt) - bmw635 2007-08-31 02:21:35 (241 views)
- Temp gauge is probably bad circuit on SI board as battery leaks may have ate the - bmw635 2007-05-12 04:28:40 (393 views)
  - Re: Temp gauge is probably bad circuit on SI board as battery leaks may have ate the - jarni2 2007-05-12 07:35:05 (409 views)
    - Don't know about the brake then! Where's PS leak? Do you want to fix it? - bmw635 2007-05-12 13:24:47 (377 views)
      - Re: Don't know about the brake then! Where's PS leak? Do you want to fix it? - jarni2 2007-05-12 14:57:44 (360 views)
        
        E32, E34, E23, E28 use the same pump as E24, but double chak on RealOEM- @ $20 - bmw635 2007-05-12 19:18:45 (416 views)
        
        Re: E32, E34, E23, E28 use the same pump as E24, but double chak on RealOEM- @ $20 - jarni2 2007-05-13 13:04:53 (374 views)
        
        The red light flash on dash is bad bomb- use a pointed chisel to tap on the - bmw635 2007-05-14 02:02:18 (374 views)
      - Re: Don't know about the brake then! Where's PS leak? Do you want to fix it? - jarni2 2007-05-12 14:57:43 (359 views)

spotted nice E24 for sale - underdog 2007-07-04 21:00:07 (447 views)
- I'm looking fo one - layne 2007-07-28 11:10:13 (313 views)

E24 Tshirts... (pic) (url) - merc63 2007-06-01 09:35:41 (758 views)
- Re: E24 Tshirts... - daka 2007-07-16 12:31:25 (319 views)
- Why don't you pay as a sponsor since you are making money for the advertising! (nt) - LJBimmers 2007-06-01 19:03:47 (374 views)
  - because I only make a couple dollars off of the shirts as is, and - merc63 2007-06-04 11:01:48 (335 views)
- Nice Shirts, but why no Paypal??!! - CUPDGRA 2007-06-01 09:53:20 (375 views)
  - I dunno why CafePress doesn't use it. - merc63 2007-06-01 10:10:58 (351 views)

New Member from PA (pic) - jbd5015 2007-06-08 16:58:48 (691 views)
- Re: New Member from PA (interior) - daka 2007-07-16 12:15:24 (330 views)
- Sport seat and fancy steering wheel. - kff 2007-06-08 22:28:50 (505 views)
  - Re: Sport seat and fancy steering wheel. - jbd5015 2007-06-09 09:37:14 (438 views)

HELP!!! CHECK LIGHTS STAY ON - thelastsumurai 2007-07-14 13:21:21 (373 views)
- Re: HELP!!! CHECK LIGHTS STAY ON - thelastsumurai 2007-07-14 15:02:19 (333 views)

question about brakes - thegreendragonfly 2007-07-11 20:39:52 (301 views)
- E31/E32 850 &750 front brakes, E34 540 rear brakes, E32 750 & E31 850 brake - bmw635 2007-07-12 12:17:23 (354 views)

HELP!!! - thelastsumurai 2007-05-20 12:34:50 (456 views)
- Re: HELP!!! - thelastsumurai 2007-05-24 11:12:43 (393 views)
  - HELP!!! PLEASE READ THIS!!!!!!! - thelastsumurai 2007-07-08 11:39:21 (333 views)
    - Then what ever is lit indicate problem with that part/ component- Fix it! (nt) - bmw635 2007-07-09 00:25:32 (316 views)
  - What fault lights stay on? - cwsixer 2007-05-24 21:44:14 (370 views)
  - That's normal to go out after awhile. If it stays on, it's warning you - bmw635 2007-05-24 15:48:01 (402 views)
- Re: HELP!!! - cwsixer 2007-05-24 01:19:59 (393 views)
- Did the battery melted/ corroded the PCB traces? Did you follow (url) - bmw635 2007-05-22 11:19:57 (406 views)

engine identification - help PLEASE ! - jarni2 2007-06-21 01:40:57 (511 views)
- Got pics of engine? The M90 has metal oil can vs alum on M30. - bmw635 2007-06-21 01:49:51 (502 views)
  - Re: Got pics of engine? The M90 has metal oil can vs alum on M30. - jarni2 2007-06-21 09:49:51 (725 views)
    - It's the round cast with 8x between the # 1 & 2 from the left- should be - bmw635 2007-06-21 14:18:41 (478 views)
      - Re: It's the round cast with 8x between the # 1 & 2 from the left- should be - jarni2 2007-06-21 15:09:50 (422 views)
        
        Sounds like your TURBO head replaced the orignal head since they were - bmw635 2007-06-21 15:42:54 (480 views)
        
        Re: Sounds like your TURBO head replaced the orignal head since they were (pic) - jarni2 2007-06-30 15:59:24 (549 views)
        
        It's not M90, but a M30 high compression with possibly wrong head from (pic) (url) - bmw635 2007-07-01 02:57:14 (574 views)
        
        Re: It's not M90, but a M30 high compression with possibly wrong head from - jarni2 2007-07-01 05:01:46 (435 views)
        
        There were 2 Alpina verion: true Alpina cars and cars that owner added - bmw635 2007-07-01 16:28:04 (470 views)
        
        Re: There were 2 Alpina verion: true Alpina cars and cars that owner added - jarni2 2007-07-03 13:36:42 (442 views)
        
        Install the oil temp and pressure gauge on the rear of the head where - bmw635 2007-07-03 17:43:28 (419 views)
        
        Install the oil temp and pressure SENSOR..................... (nt) - bmw635 2007-07-03 17:44:44 (476 views)
      - Head cast MY pic; (pic) - bmw635 2007-06-21 14:19:40 (566 views)
  - Re: Got pics of engine? The M90 has metal oil can vs alum on M30. - jarni2 2007-06-21 03:30:04 (439 views)

diff gears - mbz1 2007-06-08 22:57:15 (395 views)
- Re: diff gears - jbd5015 2007-06-09 09:57:16 (384 views)
  - Re: diff gears - mbz1 2007-06-15 22:17:20 (311 views)
    - Upgrade to 5spd with matching drive shaft, it'll drop to 2500-3000rpm @ 80mph. (nt) - bmw635 2007-06-16 01:03:19 (337 views)
      - Re: Upgrade to 5spd with matching drive shaft, it'll drop to 2500-3000rpm @ 80mp - mbz1 2007-06-16 21:40:28 (313 views)
        
        The more reason to do it! Just need to get flywheel , clutch kit, pilot bearing, - bmw635 2007-06-17 03:04:28 (349 views)

85' 635CSi on it's way out the door! - jklnhyde 2007-06-06 12:23:33 (545 views)
- Re: 85' 635CSi on it's way out the door! (pic) - jklnhyde 2007-06-08 17:53:22 (750 views)

Will spend more time on this board. (pic) - Ken Mc Lean - 85 635CSi 2007-05-26 23:02:10 (645 views)
- Nice looking shark. Glad to see you here. - kff 2007-06-06 10:01:08 (337 views)
- You will find a lot of R*F* refuges here..... js (nt) - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2007-05-30 11:16:09 (342 views)
- Glad to see you here! (nt) - davidc 2007-05-29 18:11:45 (312 views)

E24 650 at speed video. (url) - bmw635 2007-06-01 12:38:05 (516 views)
- Old M6 vs new M6 video. (url) - bmw635 2007-06-01 12:43:08 (493 views)

e24/635CSi-1987/ Production date 09/1986-Autotran - kjkumar 2007-05-27 22:02:05 (403 views)
- There's a write up for SI battery replacement, SI board fix on here (url) - bmw635 2007-05-27 22:23:37 (425 views)
  - Re: There's a write up for SI battery replacement, SI board fix on here - kjkumar 2007-05-28 18:46:57 (380 views)

Question: My trunk accuator ONLY LOCKS and (pic) - Ken Mc Lean - 85 635CSi 2007-05-27 22:44:05 (407 views)

How do you bleed coolant system? - mbw635 2007-05-26 15:24:56 (428 views)
- Search here for bleed instruction. (url) - bmw635 2007-05-27 22:30:36 (408 views)

odd brake question - dr750 2007-05-27 08:44:16 (332 views)
- E23 chassis/ brakes/ suspensions is different from E24/ E28. - bmw635 2007-05-27 22:21:59 (349 views)

Which oils do you use for your e24 635csi ? - jarni2 2007-05-08 16:14:01 (378 views)
- I use plain dino oil (Castrol 10W40) in my M30 engine ('86 735i). (pic) - davidc 2007-05-15 03:19:09 (440 views)
- Mobil 1 Synthetic for engine, Redline MT fluid for 5spd, Synthetic diff fluid is - bmw635 2007-05-08 20:48:26 (405 views)
  - Exactly the same for me also (pic) - kpmclean 2007-05-14 17:58:15 (433 views)
    - Re: Exactly the same for me also (pic) - Ken Mc Lean - 85 635CSi 2007-05-26 22:32:40 (375 views)

635 tailight lense - winthropmass 2007-05-23 19:50:54 (381 views)
- Re: 635 tailight lense (pic) - Ken Mc Lean - 85 635CSi 2007-05-26 22:24:04 (487 views)
- Re: 635 tailight lense - thelastsumurai 2007-05-24 11:29:36 (386 views)

Nice Badge (nt) - Ken Mc Lean - 85 635CSi 2007-05-26 22:03:18 (377 views)

interior temp sensor missing... can I use one from... - jarni2 2007-05-24 12:06:17 (387 views)
- Re: interior temp sensor missing... can I use one from... (url) - cwsixer 2007-05-24 21:53:58 (408 views)
  - Re: interior temp sensor missing... can I use one from... - jarni2 2007-05-25 01:32:21 (375 views)
- Should be be OK based on design principle but I haven't tried it. (nt) - bmw635 2007-05-24 15:49:22 (377 views)

Ground up restoration on 635 (url) - bmw635 2007-04-22 23:25:37 (926 views)
- Re: Ground up restoration on 635 - thelastsumurai 2007-05-24 11:23:51 (345 views)
  - This guy- spent over $25k so far and no end insight. (url) - bmw635 2007-05-25 00:25:46 (428 views)

rough idling e24 - ram635csi 2007-05-07 18:18:41 (442 views)
- Re: rough idling e24 (pic) - cwsixer 2007-05-24 01:01:20 (432 views)
- Try replace that sensor since heat/ age could chapped that wire. It's rare that - bmw635 2007-05-08 02:12:33 (426 views)

Fast and rough idle!! - sdesouza1311 2007-04-15 16:53:08 (482 views)
- Re: Fast and rough idle!! - sharkluver 2007-05-07 23:07:09 (382 views)
- Re: Fast and rough idle!! (url) - cwsixer 2007-05-02 19:17:51 (417 views)
  - Base on that link, it's not OEM idle control valve since it might be - bmw635 2007-05-03 01:51:39 (504 views)
- (1)Check for intake leak from air box to engine. (2) Clean idle control valve. (url) - bmw635 2007-04-15 22:01:32 (482 views)
  - Still running fast!! - sdesouza1311 2007-04-27 15:23:20 (366 views)
    - Re: Still running fast!! (pic) - sdesouza1311 2007-04-27 15:32:06 (468 views)
      - That looks like an EGR mod- never seen 1 in E24 before. - bmw635 2007-04-28 03:01:31 (399 views)
        
        Always fast - sdesouza1311 2007-04-28 10:38:54 (354 views)
        
        Use pictured idle control valve and set up the vacumm system like the link (pic) (url) - bmw635 2007-04-28 18:14:33 (1394 views)
        
        thanks I have now got another problem - sdesouza1311 2007-05-16 18:05:20 (358 views)
        
        How / what did you fix the odd ICV system? Sounds like there's a - bmw635 2007-05-17 03:03:04 (375 views)

I'm gonna get 6er stuff cause there are a few here that - kff 2007-05-07 22:39:43 (358 views)

FS BMW Factory Workshop Manual Set - xaviero 2007-04-19 14:45:23 (444 views)
- BMW Manual Set has been sold. - xaviero 2007-05-07 21:48:20 (282 views)

Woow, minty! (url) - bmw635 2007-05-01 03:02:47 (438 views)

Polish center with black wrinkle paint. (pic) - bmw635 2007-04-28 03:13:52 (595 views)
- looks good (nt) - kff 2007-04-28 19:04:04 (282 views)

Bimmer Fest - downernsp 2007-04-25 19:55:06 (378 views)

Bumper & Air Dam - downernsp 2007-03-13 23:01:41 (436 views)
- Re: Bumper & Air Dam - jamaicawi 2007-03-19 20:49:29 (343 views)
  - Re: Bumper & Air Dam - downernsp 2007-04-25 19:49:47 (251 views)
  - Re: Bumper & Air Dam - downernsp 2007-03-22 23:03:39 (278 views)

633 csi 5 speed shifter rattles - pmtre 2007-04-23 20:18:07 (380 views)
- Re: 633 csi 5 speed shifter rattles - pmtre 2007-04-25 09:15:48 (272 views)
  - Probably worn bushing in the shifter linkage. Check these: (pic) - bmw635 2007-04-25 14:05:44 (359 views)
- Rattles like loose bushing or gear grinding from synchros? (nt) - bmw635 2007-04-24 13:08:21 (291 views)
  - Re: Rattles like loose bushing or gear grinding from synchros? - pmtre 2007-04-25 18:57:23 (271 views)

84/ 633 CSI fluid leak - pmtre 2007-02-22 11:08:05 (330 views)
- Re: 84/ 633 CSI fluid leak - pmtre 2007-04-24 06:36:13 (222 views)
- to help find the location of the leak, clean the area (url) - kff 2007-02-24 09:23:42 (282 views)
- Red is probably PS. Probably from old hoses dried up and no longer sealing @ - bmw635 2007-02-22 13:22:43 (311 views)

Day 2 of SESF @ Biltmore Est. (pic) - bmw635 2007-04-22 02:53:07 (382 views)
- Nice get together. I was at the fest last year and Ron - kff 2007-04-22 20:33:43 (298 views)
  - Ha, SESF vet! Small world- I started the SoCal SharkFest in 1999/2000 then the - bmw635 2007-04-22 23:01:45 (334 views)

pics from Putnam Park (pic) - thegreendragonfly 2007-04-21 11:17:07 (430 views)
- Tammer was at that school in his new street/track car - kff 2007-04-21 12:39:14 (278 views)

Front Bilstein shocks are gone... need help with finding others - jarni2 2007-04-19 12:19:30 (322 views)
- E24 & E28 chasis share same mechanicals( engine, suspensions,drive line, etc..) - bmw635 2007-04-19 13:28:02 (289 views)

instrument panel problems... all the readings are wrong - jarni2 2007-04-08 01:37:13 (437 views)
- Pull the cluster- lose wires or contacts to the gauge might be pitted/ corroded. (pic) - bmw635 2007-04-08 02:53:41 (502 views)
  - Re: Pull the cluster- lose wires or contacts to the gauge might be pitted/ corroded. - jarni2 2007-04-09 03:03:39 (331 views)
    - Leak @ servo excessive pressure- bad pressure sensor. Bad servo - bmw635 2007-04-09 13:09:41 (374 views)
      - Re: Leak @ servo excessive pressure- bad pressure sensor. Bad servo - jarni2 2007-04-09 15:50:48 (369 views)
        
        If the leak of hose #5 is at the washer, it's the bad hydraulic sensor. - bmw635 2007-04-09 16:35:20 (333 views)
        
        Re: If the leak of hose #5 is at the washer, it's the bad hydraulic sensor. (url) - jarni2 2007-04-10 03:56:13 (300 views)
        
        # 2- if bad, it over pressurized the system. The brakes - bmw635 2007-04-10 11:05:15 (325 views)
        
        BTW, if the brakes only flash when stepping on the brakes then it's the bomb,not - bmw635 2007-04-10 11:12:59 (320 views)
        
        Re: BTW, if the brakes only flash when stepping on the brakes then it's the bomb,not - jarni2 2007-04-12 02:15:24 (329 views)
        
        The light on test panel is to show you it's lit( bulb is working) so that (url) - bmw635 2007-04-12 13:02:24 (361 views)
        
        I opened my instruments and removed the 2 accu batteries... - jarni2 2007-04-19 12:08:31 (272 views)
        
        Check contacts on the gauge as it could be pitted, corroded- clean contact. (nt) - bmw635 2007-04-19 13:24:38 (294 views)

E24 Engine info & specs (url) - bmw635 2007-04-10 19:47:21 (426 views)

Factory 635CSi E24 Wheels/Tires Metric 1983-1987 TRX OEM Chrome Wheels - gucki83 2007-04-05 01:09:25 (419 views)

Sunroof lid removal - Lucky ///ML636 2007-04-01 01:22:03 (449 views)
- ahhh finally! - Lucky ///ML636 2007-04-03 21:30:46 (343 views)
  - Yes, I think closing S/R applies to all E24/E28. Good job! - bmw635 2007-04-03 22:43:44 (282 views)
    - hehe yeah, well i disassembled the whole thing - Lucky ///ML636 2007-04-04 00:20:53 (322 views)
      - Are you guys extending SESF invite to this board or is Charlie prohibiting? :-)) (nt) - bmw635 2007-04-04 01:05:39 (292 views)
- I heard that S/R liner is problematic is you remove. Just remove the S/R seal - bmw635 2007-04-01 20:42:41 (311 views)
  - how would i remove the seal? that thing goes around the sunroof - Lucky ///ML636 2007-04-01 22:54:12 (305 views)
    - There's couple S/R related stuff here. (url) - bmw635 2007-04-02 00:55:33 (339 views)

BMW 657 Csi- LS1 (url) - bmw635 2007-04-03 20:17:38 (554 views)

Who makes the stiffest sway bars for E-24? - M.Rad. 2007-03-31 20:47:30 (300 views)
- ST has 25/19 vs the ///M5 25/18 bars - kff 2007-04-01 17:03:12 (289 views)
  - Thanks! Will look in to these! (nt) - M.Rad. 2007-04-03 05:02:10 (273 views)
- Relocate mount for M sway bar. Did you do shock & strut? (nt) - bmw635 2007-04-01 01:15:01 (251 views)

Automatic transmission problems - Lucky ///ML636 2007-01-15 01:26:08 (532 views)
- i had a similiar problem.. (nt) - delphin635 2007-03-22 15:01:43 (296 views)
  - it was the throttle angle switch.. (nt) - delphin635 2007-03-29 20:19:50 (285 views)
- You actually had a machine hook up to flush the trans? - bmw635 2007-01-15 13:01:22 (411 views)
  - Re: You actually had a machine hook up to flush the trans? - Lucky ///ML636 2007-01-15 13:09:49 (348 views)
    - Did you have this problem B4 fluid change? Doesn't sound like electronic since - bmw635 2007-01-15 13:38:23 (361 views)
      - Re: Did you have this problem B4 fluid change? Doesn't sound like electronic sin - Lucky ///ML636 2007-01-15 13:56:56 (382 views)
        
        Call Germantransmissions.com and ask for their suugestion. Also search - bmw635 2007-01-15 14:09:37 (357 views)
        
        Re: Call Germantransmissions.com and ask for their suugestion. Also search - Lucky ///ML636 2007-01-15 20:08:39 (375 views)
        
        My 89 had mechanical clutches, the trans ECU control the valve body pressure. - bmw635 2007-01-15 20:41:25 (348 views)
        
        Re: My 89 had mechanical clutches, the trans ECU control the valve body pressure - Lucky ///ML636 2007-01-15 20:52:08 (373 views)

Bumper Fillers - asid 2007-03-22 12:21:36 (358 views)
- Front top bumper cover? I got 'em. (pic) - bmw635 2007-03-22 13:41:26 (410 views)
  - Re: Front top bumper cover? I got 'em. - asid 2007-03-28 12:17:46 (328 views)
    - Side bumper cover? US or Euro? 88-89 or pre-87? (nt) - bmw635 2007-03-28 12:38:52 (303 views)
      - Re: Side bumper cover? US or Euro? 88-89 or pre-87? - asid 2007-03-29 12:55:26 (302 views)
        
        Check Ebay as there's 2 cars being parted. (nt) - bmw635 2007-03-29 14:39:17 (295 views)

Got mine from BavAuto - '85 635 (nt) - yooper 2007-03-29 10:41:17 (285 views)
- Sorry. Should have been posted under bumper ends. (nt) - yooper 2007-03-29 10:42:25 (249 views)

Just installed M5 rearview mirror w/maplights.... - m6ermike 2007-03-25 22:54:09 (308 views)
- Gonna be driving around with the map lights on whether needed or not - kff 2007-03-27 16:22:42 (292 views)

Shameless plug - bfons 2007-02-13 15:12:02 (396 views)
- Yup, that's shameless, could at least donate to this board and - LJBimmers 2007-03-24 23:37:00 (292 views)
- Pretty shameless but don't you think you could have - kff 2007-02-13 20:59:00 (363 views)

Great White Shark sighting... (pic) - cfisher 2007-03-23 14:47:30 (586 views)
- Nice! there's a SharkFest Celebration in GA- April 20 (url) - bmw635 2007-03-23 17:14:19 (287 views)

1977 rear speakers - cruise 2007-03-15 20:50:05 (290 views)
- 87-89 635/ L6 has the Bose installed with large grill- check Ebay @ $150- pair. - bmw635 2007-03-16 00:12:42 (298 views)

BMW M635CSi Brake issues - yeshal9000 2007-03-03 21:55:39 (493 views)
- Re: BMW M635CSi Brake issues (pic) - yeshal9000 2007-03-12 16:53:30 (411 views)
- Did you empty the bomb before servicing? - stevebu 2007-03-08 08:50:58 (343 views)
  - Good point- for got about releasing pressure in bomb prior to job. (nt) - bmw635 2007-03-08 14:49:33 (339 views)
- Care to explain more details? You're not suppose to mess with the accumulator - bmw635 2007-03-04 02:31:36 (339 views)
  - Re: Care to explain more details? You're not suppose to mess with the accumulator - yeshal9000 2007-03-05 00:06:11 (359 views)
    - Are you in US? Email me # and time to call. Still not sure what - bmw635 2007-03-05 01:00:21 (320 views)
- Re: BMW M635CSi Brake issues (pic) - yeshal9000 2007-03-03 21:58:15 (466 views)

1 of a kind 635! (url) - bmw635 2007-02-26 22:23:10 (618 views)
- We sure are thankful for that ! - CUPDGRA 2007-03-03 11:42:07 (374 views)
- Re: 1 of a kind 635! - downernsp 2007-02-28 17:42:19 (330 views)
- EWWWWWWWW! (nt) - LJBimmers 2007-02-27 11:06:31 (323 views)