The 7 Series E23 Forum

1985 735se with 11600miles.. Could this be the lowest in existance (pic) - askmeswiss 2009-01-01 05:35:33 (281 views)
- Close but no cigar - ericcue 2009-01-13 01:47:26 (66 views)
- Re: 1985 735se with 11600miles.. Could this be the lowest in existance - vance 2009-01-02 09:37:18 (90 views)
  - Re: 1985 735se with 11600miles.. Could this be the lowest in existance (pic) - askmeswiss 2009-05-08 14:21:27 (43 views)
- Welcome. We;re gonna need to see more pics of this - kff 2009-01-01 15:03:53 (92 views)
- My '84 745 has 116K (nt) - ((((BIGANT)))) 2009-01-01 12:06:50 (97 views)
  - My '82 733i has 106K - donstevens 2009-01-20 21:44:42 (50 views)
  - Re: My '84 745 has 116K - Hitmanx 2009-01-13 13:56:58 (59 views)

drivetrain issue? - albac0re 2009-01-16 15:43:50 (206 views)
- This may be the center support bearing (url) - kff 2009-01-16 16:45:27 (145 views)
  - Re: This may be the center support bearing - albac0re 2009-01-16 18:32:11 (140 views)
    - Re: This may be the center support bearing - John B '84 733i 5-speed 2009-01-19 21:08:35 (125 views)
    - Ok let's start at the begining. (url) - kff 2009-01-16 20:31:10 (118 views)
- Re: drivetrain issue? - albac0re 2009-01-16 16:43:03 (137 views)
  - Re: drivetrain issue? - bvachon 2009-01-17 14:42:32 (152 views)
    - Re: drivetrain issue? - albac0re 2009-01-29 13:25:23 (104 views)
      - The BMW driveshaft is hard to rebuild, but possible. - kff 2009-01-29 14:07:53 (205 views)
        
        Re: The BMW driveshaft is hard to rebuild, but possible. - albac0re 2009-01-31 16:31:17 (118 views)
        
        Re: The BMW driveshaft is hard to rebuild, but possible. - albac0re 2009-02-07 23:28:00 (106 views)
  - those CV joints usually indicate by making noise when - kff 2009-01-16 16:47:38 (151 views)
    - ALSO: when replacing cv boots, Bentleys - clemsoncpa 2009-02-03 10:33:15 (87 views)

Maybe for Valentines day... hope .. hope.. - johnhstein, 85-M6CSi, 85 745i 2009-01-13 15:55:58 (189 views)
- Sounds like a slug... LOL... - ejonesie22 2009-01-14 10:11:57 (126 views)
  - autobox... more - johnhstein, 85-M6CSi, 85 745i 2009-01-14 11:41:46 (151 views)
    - How's it hitting the MPGs... (nt) - ejonesie22 2009-01-15 16:28:14 (126 views)
      - if memory serves... - johnhstein, 85-M6CSi, 85 745i 2009-01-16 07:03:37 (108 views)
        
        Re: if memory serves... - matthewt 2009-01-16 22:04:56 (117 views)
        
        Re: if memory serves... - Hitmanx 2009-01-16 23:58:48 (105 views)
        Go to a custom shop, you can use my plans, adjust as needed (url) - ejonesie22 2009-01-16 23:11:18 (235 views)
        
        Quick Question - Resonance ??? Seeking info... - johnhstein, 85-M6CSi, 85 745i 2009-01-30 12:19:11 (92 views)
        
        John, for my turbo to work maximum you need this exhaust setup... (pic) - Draleu 2009-01-30 21:51:12 (162 views)
        
        Re: Go to a custom shop, you can use my plans, adjust as needed - matthewt 2009-01-17 07:20:43 (133 views)
        
        Re: Go to a custom shop, you can use my plans, adjust as needed - Hitmanx 2009-01-17 16:15:22 (112 views)
        
        Re: Go to a custom shop, you can use my plans, adjust as needed - matthewt 2009-01-17 19:05:17 (117 views)
        
        Re: Go to a custom shop, you can use my plans, adjust as needed - Hitmanx 2009-01-17 21:31:08 (114 views)
- Re: Maybe for Valentines day... hope .. hope.. (nt) - ejonesie22 2009-01-14 10:08:30 (113 views)
- Be nice for you to get the car back. I know it is your favorite - kff 2009-01-13 18:08:24 (118 views)
- Re: Maybe for Valentines day... hope .. hope.. - Hitmanx 2009-01-13 17:24:52 (137 views)
  - Head, bolts and gasket.... - johnhstein, 85-M6CSi, 85 745i 2009-01-13 17:56:49 (144 views)
    - Re: Head, bolts and gasket.... - Hitmanx 2009-01-13 19:13:10 (120 views)
- Re: Maybe for Valentines day... hope .. hope.. - vance 2009-01-13 16:11:41 (124 views)
  - Pics will follow... and - johnhstein, 85-M6CSi, 85 745i 2009-01-13 18:01:44 (119 views)

Andy G just found this pic of ARC rims for E23 (pic) - phathome 2008-12-24 11:49:24 (275 views)
- Is that Andy G's house in the background? (nt) - phathome 2008-12-24 11:50:18 (78 views)
  - Re: Is that Andy G's house in the background? - vance 2008-12-24 15:20:32 (83 views)
    - Post a pic please Vance, they look awesome (nt) - phathome 2008-12-26 14:43:26 (66 views)
    - Vance (nt) - mrb10 2008-12-24 18:26:11 (78 views)
      - Re: Vance when I get it I'll send an enlarged pic to you - mrb10 2008-12-24 18:26:57 (81 views)
        
        Thank you! (nt) - vance 2008-12-25 10:09:20 (66 views)
    - Vance (nt) - mrb10 2008-12-24 18:26:10 (69 views)
      - FAO Vance, copy of pic is available (pic) - mrb10 2009-01-26 16:51:46 (80 views)

How to tell if your diff is an LSD from the inside? (pic) - Draleu 2009-01-16 21:24:14 (240 views)
- look for the clutch pack (pic) - ghw 2009-01-19 15:06:06 (166 views)
- That looks like the pic of my open Diff? - ((((BIGANT)))) 2009-01-17 18:35:32 (108 views)
  - Not that many e23's are fitted with LSD - BMW1066 2009-01-17 19:02:51 (107 views)
    - Re: Not that many e23's are fitted with LSD - Hitmanx 2009-01-17 21:57:53 (95 views)
      - In the UK many did! - mrb10 2009-01-19 16:27:31 (84 views)
        
        Re: In the UK many did! - BMW1066 2009-01-21 17:25:05 (70 views)
        Re: In the UK many did! - BMW1066 2009-01-21 17:25:04 (78 views)
        
        I think pre 09/82 735 Special Equipment have them as standard (nt) - philipuk 2009-01-22 03:39:24 (84 views)
        
        Re: I think pre 09/82 735 Special Equipment have them as standard - BMW1066 2009-01-22 15:53:59 (72 views)
        
        But thats 8 cars out of how many? - mrb10 2009-01-22 16:44:58 (68 views)
        
        Good detective work Andy. But don't tell the E24/E28 guys - philipuk 2009-01-23 03:36:07 (102 views)
        
        Did the erley car's came back with complet build info's - BMW1066 2009-01-25 15:49:31 (80 views)
        
        The reports I got were quite detailed, printed out from BMW - mrb10 2009-01-25 16:43:37 (69 views)

Differential upgrade update, MPG impact, one of the best upgraes ever... - ejonesie22 2008-12-31 09:57:59 (151 views)
- Now I'm gonna say the 3.73 performance advantage may - kff 2008-12-31 12:28:28 (116 views)
  - Re: Now I'm gonna say the 3.73 performance advantage may - donstevens 2009-01-20 19:19:39 (82 views)
  - Well if it is purely a high way car, I can see that a 3.46 or .25 is better. - ejonesie22 2008-12-31 14:01:43 (98 views)
    - Yes, two thumbs up for the diff swap, ratio selection is key. (nt) - kff 2009-01-01 20:35:06 (79 views)
      - Yes, and one last thought... - ejonesie22 2009-01-02 11:12:43 (96 views)
        
        Left off... - ejonesie22 2009-01-02 11:14:57 (83 views)
    - Re: Well if it is purely a high way car, I can see that a 3.46 or .25 is better. - BigBruce 2009-01-01 11:29:42 (87 views)
      - They are head turners, that is for sure. - ejonesie22 2009-01-02 10:59:23 (90 views)
      - Re: Well if it is purely a high way car, I can see that a 3.46 or .25 is better. - BigBruce 2009-01-01 11:33:38 (86 views)
        
        Re: Well if it is purely a high way car, I can see that a 3.46 or .25 is better. - ejonesie22 2009-01-02 11:00:41 (80 views)
      - Re: Well if it is purely a high way car, I can see that a 3.46 or .25 is better. - BigBruce 2009-01-01 11:33:38 (81 views)

Rear headrests cost when new?? - 06impreza 2009-01-17 00:04:21 (123 views)
- Don't know but enjoy them. (url) - Roy In GA 2009-01-19 01:23:25 (89 views)
  - Re: Don't know but enjoy them. - donstevens 2009-01-20 19:04:53 (70 views)

Mystery Relay. Today I talked to my Indy's Chief Helper who had worked for a - Roy In GA 2009-01-15 17:38:18 (209 views)
- Wow- nice job Roy! - sfdon 2009-01-15 23:16:26 (116 views)
- Re: Mystery Relay. Today I talked to my Indy's Chief Helper who had worked fo - 06impreza 2009-01-15 20:07:01 (111 views)
  - Not really. He said it was a make over to try to solve a problem - Roy In GA 2009-01-15 22:11:00 (92 views)
    - Re: Not really. He said it was a make over to try to solve a problem - 06impreza 2009-01-15 22:43:29 (115 views)
      - My 85 has the stock system. (pic) - demet 2009-01-16 10:15:05 (200 views)
        
        Part 2. (pic) - demet 2009-01-20 09:38:41 (150 views)
      - I will ask him some more. You need to see if you can find - Roy In GA 2009-01-16 01:17:19 (113 views)
        
        I have seen those additional harnesses cause drivability probs... - techboy 2009-01-16 12:55:40 (114 views)

Brake caliper drama - radish150 2009-01-09 23:15:38 (171 views)
- I've got a Beck Arnley reman unit for left front - John B '84 733i 5-speed 2009-01-19 21:16:04 (93 views)
- Re: Brake caliper drama - Hitmanx 2009-01-10 11:38:18 (124 views)
  - Mcparts auto - radish150 2009-01-10 14:20:17 (121 views)
    - Re: Mcparts auto - radish150 2009-01-10 14:36:28 (105 views)
      - Sorry for the double post (nt) - radish150 2009-01-10 14:38:24 (97 views)
    - Re: Mcparts auto - Hitmanx 2009-01-10 14:32:51 (96 views)
- I had a stuck one once and put a short small pipe extension on the supply - Roy In GA 2009-01-10 01:49:25 (117 views)
  - Re: I had a stuck one once and put a short small pipe extension on the supply - radish150 2009-01-10 02:18:00 (97 views)
    - There is another way to get the piston out... - sfdon 2009-01-11 02:49:44 (102 views)
  - Throw it away...the piston is eaten too badly to re-use (nt) - sfdon 2009-01-10 02:06:15 (123 views)
    - Re: Throw it away...the piston is eaten too badly to re-use - radish150 2009-01-10 02:18:53 (99 views)
    - better answer..... Call Double 02 and tell them to - sfdon 2009-01-10 02:18:39 (109 views)
      - Who is Double 02? (nt) - radish150 2009-01-10 02:20:55 (107 views)
        
        Re: Who is Double 02? - radish150 2009-01-10 02:27:22 (101 views)
        
        Wow, Double O2 rocks - radish150 2009-01-10 14:13:19 (107 views)
        
        It's in the oven - radish150 2009-01-10 19:58:42 (103 views)
        
        Re: It's in the oven - radish150 2009-01-10 21:19:26 (89 views)
        
        Did you have enough of the piston available to - kff 2009-01-11 12:01:14 (91 views)
        
        Getting ready to install pistons (yikes) - radish150 2009-01-11 13:30:06 (101 views)
        
        Don't freeze or heat... Use sylglide or ATE brake assembly - sfdon 2009-01-11 15:40:04 (213 views)
        
        VTH caliper paint, blue better than red - radish150 2009-01-11 19:33:06 (117 views)
        
        Have fun with that....you will need to get - sfdon 2009-01-11 22:54:30 (116 views)
        
        2 rebuilt calipers on the way. - radish150 2009-01-12 21:49:24 (90 views)
        
        Re: 2 rebuilt calipers on the way. - sfdon 2009-01-12 23:52:14 (93 views)
        
        Re: 2 rebuilt calipers on the way. - Hitmanx 2009-01-20 01:01:28 (77 views)
        Defective calipers? - radish150 2009-01-13 20:28:52 (97 views)
        
        Worst case scenario- I send you a set from - sfdon 2009-01-13 22:00:29 (86 views)
        
        Disgruntled - radish150 2009-01-12 01:22:48 (114 views)
        
        here is a chart for you... (pic) - sfdon 2009-01-12 11:26:01 (170 views)
        
        bigger chart (pic) - sfdon 2009-01-12 11:27:00 (146 views)
        
        Blue is faster and stops better. Red is more like hot brakes (nt) - kff 2009-01-11 19:56:33 (109 views)
        
        Wow,and I thought it was just more aesthetically pleasing (nt) - radish150 2009-01-12 01:32:25 (88 views)
        
        ANTILOCK BLEEDING - radish150 2009-01-15 23:58:39 (91 views)

who can explain the innards of an air flow meter? (pic) - philipuk 2009-01-14 12:48:54 (175 views)
- Re: who can explain the innards of an air flow meter? (url) - kff 2009-01-14 17:23:40 (146 views)
  - You probably should look elsewhere... - John B '84 733i 5-speed 2009-01-19 21:13:35 (76 views)

Bad vibes - radish150 2009-01-18 00:54:34 (119 views)
- What about hubcentric rings? - John B '84 733i 5-speed 2009-01-19 21:06:33 (98 views)
- A bit of perspective... - johnhstein, 85-M6CSi, 85 745i 2009-01-19 12:05:57 (100 views)
- I have a sticky caliper front-right...it makes the front wheels - Vern 2009-01-18 03:45:04 (112 views)
  - Calipers are new - butt... - radish150 2009-01-18 04:55:00 (75 views)
    - I had hub centric rings on the Schnitzers... - Vern 2009-01-18 12:33:46 (117 views)
- Re: Bad vibes - Hitmanx 2009-01-18 02:13:37 (87 views)
  - Re: Bad vibes - radish150 2009-01-18 04:43:55 (80 views)
    - Re: Bad vibes - Hitmanx 2009-01-18 15:23:10 (85 views)
    - control arms - Area52 2009-01-18 12:07:53 (99 views)

ABS bleeding - radish150 2009-01-16 00:21:03 (124 views)
- That special ABS system bleeding tool is available - sfdon 2009-01-16 12:01:08 (159 views)
  - How long to I need to 'break them in'? - radish150 2009-01-18 00:38:44 (104 views)
    - Re: How long to I need to 'break them in'? - Hitmanx 2009-01-18 02:02:48 (98 views)
      - Re: How long to I need to 'break them in'? - radish150 2009-01-18 04:30:28 (105 views)

Bilstein Question - chicagomark 2008-12-23 00:12:48 (162 views)
- Re: Bilstein Question - Hitmanx 2008-12-26 21:10:26 (117 views)
- Re: Bilstein Question - kff 2008-12-23 15:29:37 (156 views)
- Lots of info on this subject... (url) - wabiker 2008-12-23 09:16:56 (153 views)
- Re: Bilstein Question - cpseapeacp 2008-12-23 07:24:46 (150 views)
  - What work is involved in fitting that rear sway bar? (nt) - phathome 2008-12-23 16:53:39 (106 views)
    - Re: What work is involved in fitting that rear sway bar? - cpseapeacp 2008-12-23 18:49:08 (129 views)
      - I'd love to see pics of your work, thanks so much (nt) - philipuk 2008-12-24 03:22:46 (106 views)
        
        Re: I'd love to see pics of your work, thanks so much - cpseapeacp 2009-01-17 21:26:58 (64 views)

starter motor pings and does not engage - philipuk 2009-01-14 12:51:59 (108 views)
- Did you check your DNS Settings... - ejonesie22 2009-01-15 09:57:56 (122 views)
  - I think you are right, Philip hasn't been posting much lately. (nt) - kff 2009-01-15 10:54:54 (79 views)
    - Ha ha you jokers, I'm still alive believe it or not (nt) - philipuk 2009-01-15 12:37:27 (100 views)
      - Is the economy and Invesco keeping you from the more important things! (nt) - Roy In GA 2009-01-15 12:40:25 (74 views)
- Does ping mean click? A click means the solenoid is not - Roy In GA 2009-01-15 00:44:24 (86 views)
  - sorry for the bad description - philipuk 2009-01-15 12:36:35 (91 views)
    - Soledoid on starter - Area52 2009-01-17 15:41:06 (86 views)
      - crap...can't type today: SOLENOID!!! (nt) - Area52 2009-01-17 15:42:04 (75 views)

e23 relay map? - radish150 2009-01-16 00:18:25 (102 views)
- Look up the ETM diagrams for your car. See them on e38.org/e23. (nt) - Roy In GA 2009-01-16 01:19:08 (125 views)

anyone figure out mystery relay? - 06impreza 2009-01-12 01:51:59 (131 views)
- The picture of the mystery box on page 2 appears to be about twice the size of - Roy In GA 2009-01-15 11:50:39 (107 views)
  - I guess I am repeating everthing Don said. (nt) - Roy In GA 2009-01-15 11:56:02 (82 views)
    - I went and reviewed page 2. Why don't you just remove the silver box AND the - Roy In GA 2009-01-15 12:38:20 (101 views)
- Just pin it out and replace with the same type. (nt) - sfdon 2009-01-12 19:57:19 (93 views)
  - pin it out??? (nt) - 06impreza 2009-01-12 23:15:28 (86 views)
    - Take a piece of paper and make notes. - sfdon 2009-01-13 00:07:10 (110 views)
      - Pop the cover off and inspect the inside. See the contacts and - Roy In GA 2009-01-13 15:25:24 (86 views)
        
        Hey Roy- - sfdon 2009-01-13 21:57:31 (90 views)
        
        Re: Hey Roy- - 06impreza 2009-01-13 22:40:01 (92 views)
        
        So its a 4 pin relay....Well- two choices... - sfdon 2009-01-13 23:43:43 (95 views)
        
        Re: So its a 4 pin relay....Well- two choices... - 06impreza 2009-01-14 00:02:55 (84 views)
        
        Re: So its a 4 pin relay....Well- two choices... - sfdon 2009-01-14 11:02:23 (100 views)
        
        Re: So its a 4 pin relay....Well- two choices... - 06impreza 2009-01-14 12:41:56 (110 views)

ECAR TOYS STILL IN BUSINESS? - cpseapeacp 2009-01-08 19:21:39 (114 views)
- Use Steve Haygood while ecartoys is not working right - kff 2009-01-08 20:26:07 (83 views)
- The site told me the same thing also. - dantheman733i 2009-01-08 19:56:01 (94 views)
  - Sorry guys. It is the network blues over here. I am working out the kinks with - Draleu 2009-01-13 14:50:33 (92 views)
    - Hope you get ecartoys up and running soon. Good Luck. (nt) - kff 2009-01-14 00:04:55 (77 views)

Brake pads question - radish150 2009-01-13 20:20:11 (78 views)
- Re: Brake pads question - radish150 2009-01-13 20:47:32 (89 views)

735 engine - carvajalj 2009-01-08 20:19:21 (108 views)
- Re: 735 engine - sfdon 2009-01-08 22:58:43 (100 views)
  - Re: 735 engine - carvajalj 2009-01-09 07:27:15 (90 views)
    - go to: - stevebu 2009-01-09 08:45:00 (94 views)
      - I have spare 85 735 engine - dr750 2009-01-10 13:27:12 (89 views)
        
        Re: I have spare 85 735 engine - carvajalj 2009-01-13 11:32:32 (84 views)
        
        Odd - dr750 2009-01-13 18:25:40 (81 views)

Another Q? - sgstudioguitar 2009-01-06 02:50:01 (125 views)
- Pressure Test. (url) - Roy In GA 2009-01-06 23:30:59 (112 views)
  - Your regulator is listed as a 3 bar model. A bar is slightly over 14 psi so (url) - Roy In GA 2009-01-07 11:08:40 (99 views)
- several simple checks... - johnhstein, 85-M6CSi, 85 745i 2009-01-06 15:20:35 (105 views)
- Re: Another Q? - Hitmanx 2009-01-06 04:42:46 (123 views)
  - I also agree w/ Hitmax, ...more... - johnhstein, 85-M6CSi, 85 745i 2009-01-06 15:27:09 (111 views)
    - Update... - sgstudioguitar 2009-01-06 15:40:55 (117 views)
      - Hey Gibson Player...got this brilliant friggin' idea... - Area52 2009-01-06 20:31:20 (108 views)
        
        okay...what should the psi be around going into the rail and coming out ?np (nt) - sgstudioguitar 2009-01-06 23:38:56 (98 views)
        
        read my lips..... - johnhstein, 85-M6CSi, 85 745i 2009-01-13 15:51:03 (92 views)
        
        Here ya go... (url) - Area52 2009-01-06 22:10:42 (98 views)
  - Fair warning- running your engine that rich - sfdon 2009-01-06 11:32:28 (124 views)

Moving up, but not moving out, an additon to the fleet... (pic) - ejonesie22 2009-01-11 12:22:48 (247 views)
- I'm drooling. Nice find! (nt) - DavidC 2009-01-13 01:29:38 (79 views)
- Looks good. I had been wondering how Wynne's inspection turned out - Roy In GA 2009-01-12 16:21:25 (106 views)
  - Inspection was very good. - ejonesie22 2009-01-13 11:02:19 (81 views)
- Sweet! - vance 2009-01-11 17:14:28 (139 views)
  - I saw that car I think. Is it white? (nt) - ejonesie22 2009-01-11 21:08:33 (94 views)
    - Re: I saw that car I think. Is it white? - vance 2009-01-12 10:32:06 (104 views)
    - Ok, that was weird... - ejonesie22 2009-01-11 21:10:32 (96 views)
      - You're just checking the mods aren't you? - kff 2009-01-11 21:38:52 (92 views)
        
        Well you we awake I guess. - ejonesie22 2009-01-13 11:22:50 (76 views)
        
        That should be were awake... (nt) - ejonesie22 2009-01-13 15:37:24 (82 views)
        Re: Well you we awake I guess. - kff 2009-01-13 12:22:45 (80 views)
        
        Oh, I agree. (nt) - ejonesie22 2009-01-13 15:44:51 (78 views)
- Re: Moving up, but not moving out, an additon to the fleet... - Hitmanx 2009-01-11 13:22:24 (124 views)
- Nice..... (nt) - wabiker 2009-01-11 12:34:38 (85 views)

82 728i - Great cold start, hot start not so good - u00jdj2 2009-01-13 03:26:55 (77 views)
- hot start problems are almost always fuel related. - sfdon 2009-01-13 13:42:43 (75 views)

e23 conrol arms - unvago 2009-01-10 20:32:55 (106 views)
- No,the control arms have ball joints which wear out., too (nt) - kff 2009-01-10 21:35:10 (110 views)
  - Re: No,the control arms have ball joints which wear out., too - unvago 2009-01-11 14:09:15 (81 views)

control arm removal - 944s 2009-01-10 17:05:30 (125 views)
- Re: control arm removal - Hitmanx 2009-01-11 13:33:42 (106 views)
- Get the Tool, I did this fairly recently on both 7's.... - wabiker 2009-01-10 17:42:06 (98 views)
  - Have you tried the hammer anvil method. Big hammer on one side as the anvil and - Roy In GA 2009-01-11 01:57:58 (98 views)
  - Re: Get the Tool, I did this fairly recently on both 7's.... - 944s 2009-01-11 01:57:42 (94 views)
    - Fortunately for me,, JoeG had one. ;-) - wabiker 2009-01-11 12:33:31 (91 views)
    - Leave the nut on all the way to the top [flush with he threads] - sfdon 2009-01-11 02:41:43 (105 views)

Brake system connected to the power steering system? - radish150 2009-01-08 22:55:32 (167 views)
- Re: Brake system connected to the power steering system? - radish150 2009-01-08 22:59:11 (123 views)
  - While you are at it, (url) - kff 2009-01-09 00:50:59 (154 views)
  - The brake pressure accumulator holds pressurized fluid - kff 2009-01-09 00:44:47 (157 views)
    - Re: The brake pressure accumulator holds pressurized fluid - radish150 2009-01-09 01:46:39 (112 views)
      - Re: The brake pressure accumulator holds pressurized fluid - rgrimespe 2009-01-09 14:46:09 (119 views)
        
        Re: The brake pressure accumulator holds pressurized fluid - Hitmanx 2009-01-09 19:58:16 (104 views)
        
        Re: The brake pressure accumulator holds pressurized fluid - radish150 2009-01-09 22:51:41 (136 views)
        
        Did you change the filter in the bottom of the reservoir? (nt) - kff 2009-01-11 11:59:21 (104 views)

used ZF 4HP-22 transmission (pic) - 635turbo 2009-01-10 15:50:37 (195 views)
- Excuse me but brand new is $850 from Joe G. - sfdon 2009-01-11 01:46:27 (133 views)

What do you think of this item? - radish150 2009-01-10 03:03:41 (110 views)
- The chip for the US 735i is the one from Mark D'silva. - kff 2009-01-10 21:38:03 (100 views)
- Re: What do you think of this item? - Hitmanx 2009-01-10 09:15:11 (86 views)

Angel Eyes for E23 - zecrazysvierge 2009-01-09 23:31:33 (140 views)
- Re: Angel Eyes for E23 (url) - Oka 2009-01-10 21:25:37 (137 views)

Need advice. I want to disconnect the wire lead to the oil level - Roy In GA 2009-01-09 19:11:16 (82 views)
- Just pull! - sfdon 2009-01-09 22:00:51 (87 views)
  - Thanks Don. (nt) - Roy In GA 2009-01-10 01:42:02 (76 views)

weird noise - assoleinc 2009-01-06 11:07:35 (139 views)
- An E23???? - Area52 2009-01-06 20:49:47 (111 views)
  - Re: An E23???? - assoleinc 2009-01-07 21:59:37 (99 views)
    - sounds like the cruise control... - sfdon 2009-01-08 02:09:59 (123 views)
      - Re: sounds like the cruise control... - assoleinc 2009-01-08 05:35:15 (101 views)
        
        Re: sounds like the cruise control... - cpseapeacp 2009-01-08 10:43:17 (114 views)
        
        Re: sounds like the cruise control... - assoleinc 2009-01-08 18:21:33 (100 views)
        
        thank you - assoleinc 2009-01-08 18:38:46 (92 views)
        
        Re: thank you - cpseapeacp 2009-01-08 19:18:41 (89 views)

Caliper rebuild tutorial? - radish150 2009-01-07 00:43:17 (96 views)
- Here's some good info. (url) - DavidC 2009-01-08 17:17:51 (88 views)
- Re: Caliper rebuild tutorial? - radish150 2009-01-07 01:50:36 (82 views)
  - How about writing a message on it here? (nt) - DavidC 2009-01-08 17:10:57 (72 views)

Anybody have BMWTechInfo.com Repair Manual in PDF? (url) - samspade 2009-01-07 06:46:51 (150 views)
- Ok, just compiled it myself, Download here ... (pic) (url) - samspade 2009-01-08 13:58:06 (260 views)
  - Cool.. does that include Euro Models ? (nt) - wabiker 2009-01-08 14:13:30 (95 views)
    - DoH... nevermind... I reread the screenshot... (nt) - wabiker 2009-01-08 14:16:41 (86 views)

More front brake questions - radish150 2009-01-07 14:22:56 (114 views)
- I run them at 3 ft-lbs. (nt) - demet 2009-01-08 09:20:55 (85 views)
- With the wheel mounted and spinning by hand - sfdon 2009-01-07 18:44:35 (101 views)
  - Re: With the wheel mounted and spinning by hand - radish150 2009-01-07 21:22:56 (90 views)
- Re: More front brake questions - radish150 2009-01-07 14:55:40 (93 views)

Anyone know of a really nice e23 in black for sale? - chad20 2009-01-07 21:49:58 (103 views)
- BTW, what is up with the ecar site, has David gone out of business? (nt) - chad20 2009-01-07 21:59:04 (74 views)
  - I sent an inquiry a week back and have heard nothing. (nt) - Roy In GA 2009-01-07 23:55:59 (77 views)

BAT (pic) - sfdon 2009-01-06 22:46:13 (252 views)
- Re: BAT - vance 2009-01-07 19:35:59 (99 views)

Need some help for my research. I am looking for an e23 VIN from a car built in - Roy In GA 2009-01-06 23:38:39 (93 views)
- What engine option did you want? (nt) - kff 2009-01-07 10:13:59 (86 views)
  - here are two - kff 2009-01-07 10:22:18 (81 views)
    - Thanks, exactly what I needed!!! (nt) - Roy In GA 2009-01-07 11:20:15 (76 views)

Brake rotors not what I expected - radish150 2009-01-04 18:43:30 (156 views)
- Lose the parts guy.... He is trying to kill you. (nt) - sfdon 2009-01-04 21:52:38 (114 views)
  - LOL, and people say I am blunt... (nt) - ejonesie22 2009-01-05 09:52:14 (84 views)
- Don't not skimp on the brakes, take them back... - ejonesie22 2009-01-04 21:04:16 (126 views)
  - Re: Don't not skimp on the brakes, take them back... - radish150 2009-01-04 23:05:53 (113 views)
    - Re: Don't not skimp on the brakes, take them back... - Hitmanx 2009-01-06 05:27:29 (99 views)
    - Good call... - ejonesie22 2009-01-05 09:54:04 (97 views)
- The front rotors need to be vented to handle the job they must (url) - kff 2009-01-04 19:53:37 (129 views)
  - Re: The front rotors need to be vented to handle the job they must - radish150 2009-01-05 23:25:34 (90 views)
    - Axxis ceramics are good pads. No worries with those. (nt) - kff 2009-01-06 09:55:16 (90 views)
      - Re: Axxis ceramics are good pads. No worries with those. - radish150 2009-01-07 02:03:49 (79 views)
        
        Caliper rebuild is a good idea on these old cars. I did mine - kff 2009-01-07 10:06:30 (98 views)

Can someone give me the info on my new 745i - ((((BIGANT)))) 2009-01-01 12:17:54 (161 views)
- Re: Can someone give me the info on my new 745i - radish150 2009-01-07 02:16:13 (81 views)
  - Re: Can someone give me the info on my new 745i - Hitmanx 2009-01-07 03:03:05 (70 views)
- Congrats! These are beautiful cars! - luquette 2009-01-05 16:30:54 (94 views)
  - Thanks it is my 2nd 745i.... - ((((BIGANT)))) 2009-01-05 18:49:31 (84 views)
- Re: Can someone give me the info on my new 745i - Hitmanx 2009-01-01 23:15:47 (92 views)
  - Re: Can someone give me the info on my new 745i - ((((BIGANT)))) 2009-01-02 11:27:34 (97 views)
    - Re: Can someone give me the info on my new 745i - Hitmanx 2009-01-02 23:11:50 (71 views)
- Looks nice, and I sent some info. (nt) - Roy In GA 2009-01-01 15:50:46 (92 views)
  - I got it thank you Roy (nt) - ((((BIGANT)))) 2009-01-01 16:26:17 (76 views)

Hey STICKY! - radish150 2009-01-07 02:09:18 (71 views)

Distributor Cap/ set timing??? - sgstudioguitar 2009-01-06 19:22:20 (97 views)
- Re: Distributor Cap/ set timing??? - Area52 2009-01-06 20:38:08 (85 views)

Fuel Hoses??? - sgstudioguitar 2009-01-06 01:43:06 (95 views)
- Re: Fuel Hoses??? - Hitmanx 2009-01-06 03:47:00 (94 views)
- The one in front going down from FPR, going up is the vacumm to control FPR, - bmw635 2009-01-06 01:48:39 (83 views)
  - Re: The one in front going down from FPR, going up is the vacumm to control FPR, - sgstudioguitar 2009-01-06 01:50:59 (84 views)

3HP22 - Hitmanx 2009-01-05 05:41:29 (87 views)
- Re: 3HP22 - sfdon 2009-01-05 12:25:55 (89 views)

Looking for a used Getrag 265... (nt) - strobachyzoo 2009-01-05 01:14:48 (90 views)
- Re: Looking for a used Getrag 265... - strobachyzoo 2009-01-05 01:31:08 (83 views)

Which diff mount? - Hitmanx 2009-01-04 02:50:15 (86 views)
- E28 M535i (nt) - kff 2009-01-04 10:42:45 (76 views)
  - Re: E28 M535i - Hitmanx 2009-01-04 21:40:16 (75 views)

Static Issue - Oka 2009-01-03 22:48:35 (65 views)

New owner, oil service light wont reset - radish150 2009-01-01 23:28:15 (115 views)
- Re: New owner, oil service light wont reset - radish150 2009-01-03 22:26:31 (81 views)
- Re: New owner, oil service light wont reset - sd01 2009-01-02 12:21:38 (94 views)
- Check Engine light or CHECK light? - kff 2009-01-02 11:46:29 (91 views)
- electricians tape is easier... or buy this for 79 bucks - sfdon 2009-01-02 00:36:46 (104 views)
  - Re: electricians tape is easier... or buy this for 79 bucks - radish150 2009-01-02 02:19:27 (81 views)

Hydraulic brake booster leaking ATF ... (pic) - samspade 2009-01-02 02:04:09 (176 views)
- Re: Hydraulic brake booster leaking ATF ... - Hitmanx 2009-01-03 19:51:57 (95 views)
- Some times it is only a bad front low pressure o-ring which is in behind - Roy In GA 2009-01-02 10:15:57 (95 views)
  - Took the brake booster apart ... (pic) - samspade 2009-01-03 09:40:10 (146 views)
    - I recently read that Joe had the parts but in the past I always saw (url) - Roy In GA 2009-01-03 11:49:36 (89 views)

Having the E23 repainted ... to what color? - samspade 2009-01-02 11:23:37 (106 views)
- Re-phrasing to 'What's your favorite E23 OEM color?' ... (nt) - samspade 2009-01-03 09:58:46 (84 views)
  - For teh E28, I prefer white, for the E23, I have seen - kff 2009-01-03 11:07:53 (82 views)
- Re: Having the E23 repainted ... to what color? - Hitmanx 2009-01-02 23:13:09 (85 views)
- I'd keep it orginal myself... - ejonesie22 2009-01-02 11:40:31 (82 views)
  - What Evan said. Nothing like a stunning engine compartment - kff 2009-01-02 11:47:49 (85 views)
    - LOL, yup, it does have it's good and bad points... (nt) - ejonesie22 2009-01-02 14:54:53 (83 views)

happy late new years everyone! (pic) - dantheman733i 2009-01-03 02:06:18 (142 views)

speedometer and odometer.....more - sgstudioguitar 2009-01-02 01:46:33 (110 views)
- Did you inspect the SI board for bad batteries and other problems? (nt) - Roy In GA 2009-01-02 10:07:58 (100 views)
  - I really don't know how to check the batteries or anything on the SI board..... - sgstudioguitar 2009-01-02 17:22:09 (92 views)
    - Have to remove the Instrument cluster and take a peek inside. (nt) - wabiker 2009-01-02 20:22:29 (98 views)
      - Reading material... (url) - wabiker 2009-01-02 20:26:53 (109 views)
        
        The batteries sometimes corode and mess up the board. (nt) - Roy In GA 2009-01-03 01:07:36 (77 views)

heater core replacement - jrodriquez70 2009-01-01 17:18:31 (81 views)
- as a heads up- make sure it isnt just the - sfdon 2009-01-02 00:33:04 (91 views)
- Re: heater core replacement - jrodriquez70 2009-01-01 17:22:31 (79 views)
  - There are two folks to deal with for parts. - kff 2009-01-01 20:26:18 (82 views)
    - Re: There are two folks to deal with for parts. - kff 2009-01-01 20:28:08 (67 views)

Driveshafts... 745i v 735i - Hitmanx 2008-12-29 00:40:56 (94 views)
- Re: Driveshafts... 745i v 735i - Hitmanx 2009-01-01 22:58:19 (73 views)
- keep in mind fine vs coarse spline. (nt) - sfdon 2008-12-29 20:20:50 (69 views)
- Did you check realoem and see if they have different... - ejonesie22 2008-12-29 14:56:54 (67 views)

1985 735i BMW jerking..SUCKING THROUGH GAS!!!! HELP - sgstudioguitar 2008-12-30 18:04:25 (115 views)
- There are many more thingsto look at... - ejonesie22 2008-12-30 19:54:42 (92 views)
  - Re: There are many more thingsto look at... - sgstudioguitar 2008-12-31 00:37:26 (84 views)
    - Cap and rotor, double check wires off the car. - ejonesie22 2008-12-31 09:42:21 (83 views)
    - what about your fuel pressure? - sfdon 2008-12-31 01:53:37 (111 views)
      - Re: what about your fuel pressure? - sgstudioguitar 2008-12-31 13:32:18 (87 views)
        
        Re: what about your fuel pressure? - sgstudioguitar 2008-12-31 13:46:06 (89 views)
        
        Measure the fuel pressure. Pull the supply line to the rail and - Roy In GA 2008-12-31 14:25:19 (114 views)
      - BTW- verify temp sender at the ecu plug and - sfdon 2008-12-31 01:56:24 (82 views)

Need help finding oem shocks - jagz 2008-12-30 12:03:32 (72 views)

Converting E23 hydraulic brake servo to vacuum brake booster? - samspade 2008-12-27 00:06:26 (108 views)
- Re: Converting E23 hydraulic brake servo to vacuum brake booster? - Hitmanx 2008-12-27 19:03:28 (87 views)
- Do not do it. - ejonesie22 2008-12-27 01:42:57 (103 views)
  - Good points ... conversion scratched, will just change seals. (nt) - samspade 2008-12-27 05:47:31 (74 views)
- I have had my 735i for 20 years and it doesn't leak. The earlier - Roy In GA 2008-12-27 01:39:51 (86 views)

Rear Windshield? - dannarbor 2008-12-26 08:21:42 (85 views)
- I should have one. - stevebu 2008-12-27 14:42:21 (77 views)

Power steering pump repair kit? (pic) - samspade 2008-12-26 18:03:33 (215 views)
- Joe Gisler sells the repair kit. (nt) - sfdon 2008-12-27 11:18:11 (105 views)
- Re: Power steering pump repair kit? - Hitmanx 2008-12-26 20:59:23 (128 views)
- Where is the leak, front or back? The parts are common to several cars. Like - Roy In GA 2008-12-26 18:35:15 (82 views)
  - The leaks are everywhere ... - samspade 2008-12-26 23:51:28 (95 views)
    - I suggest you clean it up and find out where the leaks really are located. (nt) - Roy In GA 2008-12-27 01:21:22 (89 views)
      - agreed, nothing like a spray with some engine cleaner - kff 2008-12-27 10:34:05 (86 views)

E23 transmission/driveshaft anyone need it let me know car going to junkyard - JibbaJabba 2008-12-26 19:23:35 (103 views)
- Re: E23 transmission/driveshaft anyone need it let me know car going to junkyard - Hitmanx 2008-12-26 20:58:07 (87 views)
  - sorry but whats a flexplate? (nt) - JibbaJabba 2008-12-27 00:00:14 (87 views)
    - On the flywheel of an automatic car (nt) - Roy In GA 2008-12-27 01:43:03 (87 views)
- Re: E23 transmission/driveshaft anyone need it let me know car going to junkyard - chicagomark 2008-12-26 20:12:44 (93 views)
  - in kansas, but i might be making a trip to chicago e-mail me - JibbaJabba 2008-12-27 00:02:30 (88 views)

MTECH springs - 944s 2008-12-26 14:11:07 (100 views)
- Re: MTECH springs - Hitmanx 2008-12-26 21:02:00 (110 views)

Merry Christmas, everyone! - DavidC 2008-12-24 14:57:23 (95 views)
- Health problems? sorry to hear that David - phathome 2008-12-26 14:45:42 (63 views)
- Merry Christmas to you all and especially you David, good health. (nt) - Roy In GA 2008-12-25 01:58:15 (61 views)
- Re: Merry Christmas, everyone! - hartac54 2008-12-24 19:08:53 (63 views)
- Merry Christmas Backacha David..! - wabiker 2008-12-24 17:57:57 (63 views)
- Merry Christmas, to you, David !!! And to everyone else. (nt) - Vern 2008-12-24 15:05:26 (66 views)
  - Re: Merry Christmas, to you, David !!! And to everyone else. - vance 2008-12-24 15:15:03 (62 views)
    - Keep safe guys and have a great time - mrb10 2008-12-24 18:28:43 (59 views)

need a new rear windsheild for xmas - dannarbor 2008-12-24 19:41:25 (68 views)
- Try the used car part vendors listed in the - kff 2008-12-26 08:30:08 (81 views)
  - thanks, any to recommend near MI? - dannarbor 2008-12-26 12:20:10 (70 views)

Are these oil pans interchangable? (pic) - demet 2008-12-22 16:42:49 (137 views)
- You know you will need a different level sensor... - sfdon 2008-12-22 21:48:53 (90 views)
  - Re: You know you will need a different level sensor... - sfdon 2008-12-24 18:29:21 (73 views)
  - Thanks Don. - demet 2008-12-24 11:32:24 (75 views)
    - Best I can get is 'Ausführung' is delivery or rendition - Vern 2008-12-24 14:37:31 (68 views)
      - model, pattern, specimen, construction, make, style, finish. (nt) - Roy In GA 2008-12-25 01:52:54 (64 views)
        
        Danke Schoen, Roy (nt) - Vern 2008-12-25 03:40:06 (56 views)

Left my E23 parked for two weeks and now the pink fluid has overflowed - phathome 2008-12-21 10:27:18 (84 views)
- sounds like you were over full and the bomb - sfdon 2008-12-21 11:53:11 (79 views)
  - Philip have you been pumping the break at all - BMW1066 2008-12-21 18:49:53 (72 views)
    - Engine off. Pump the pedal anywhere from 10 to 20 times, until the pedal is hard - Roy In GA 2008-12-22 00:45:14 (73 views)
      - ERR It don't go hard on a hydrolic system? (nt) - BMW1066 2008-12-23 18:47:49 (65 views)
  - Does this mean the bomb needs replacing? (nt) - phathome 2008-12-21 15:42:58 (72 views)
    - nope- check your Bentleys, that is a sign of a leaky - sfdon 2008-12-21 17:53:44 (65 views)

old 80's car phone wanted? - mrb10 2008-12-21 15:21:21 (115 views)
- Type car phone tranceiver into ebay, some nutter may have one - phathome 2008-12-21 15:46:37 (87 views)
  - Here is a new Mod for you Philip. (url) - Roy In GA 2008-12-22 00:57:12 (129 views)
    - wow, thats so cool. (nt) - mrb10 2008-12-22 14:32:43 (66 views)
      - don't be getting any ideas :-) (nt) - phathome 2008-12-22 16:41:37 (71 views)
        
        Wonder if the gun mount from the E28 will fit the E23 - kff 2008-12-23 15:41:57 (75 views)
        
        E28 gun mount??? You been smokin' waccy baccy again? (nt) - phathome 2008-12-23 16:51:26 (70 views)
    - Excellent! Where is the optional gun turret and 88mm canon? (nt) - phathome 2008-12-22 03:53:20 (77 views)
      - I found the turret for you but I think it's 50 cal though (url) - strobachyzoo 2008-12-22 21:02:34 (87 views)
        
        Will it fit thru the sunroof hole? (nt) - philipuk 2008-12-23 05:07:01 (70 views)

Another electric fan conversion question... - sleis 2008-12-19 16:44:26 (137 views)
- Re: Another electric fan conversion question... - Hitmanx 2008-12-20 21:25:29 (107 views)
- Re: Another electric fan conversion question... - Hitmanx 2008-12-19 20:29:36 (105 views)
  - Re: Another electric fan conversion question... - sleis 2008-12-19 23:23:31 (95 views)
    - Like I thought... - sleis 2008-12-19 23:34:40 (83 views)
      - Here is a big piece of advice, everyone with the bolt through should do this... - ejonesie22 2008-12-20 01:03:16 (138 views)
        
        Just left the same message- I agree with you.. 115 bucks - sfdon 2008-12-20 01:04:58 (93 views)
        
        Yup, just add in the thicker bladed e32 fan itself and go... - ejonesie22 2008-12-20 01:11:10 (117 views)
        
        Thanks for the cooling system tips ... - samspade 2008-12-22 19:53:55 (111 views)
        Re: Yup, just add in the thicker bladed e32 fan itself and go... - sleis 2008-12-20 11:51:16 (109 views)
        
        Re: Yup, just add in the thicker bladed e32 fan itself and go... - ejonesie22 2008-12-20 18:25:14 (103 views)
        I have a couple of these clutches. Let me know if you want one. - demet 2008-12-20 13:53:17 (93 views)
        
        Re: I have a couple of these clutches. Let me know if you want one. - sleis 2008-12-22 11:20:43 (81 views)
        
        10 bucks, plus shipping so hows $15 shipped? - demet 2008-12-22 14:12:37 (89 views)
        
        Re: 10 bucks, plus shipping so hows $15 shipped? - sleis 2008-12-22 17:40:01 (78 views)
- my only comment would be you are going from - sfdon 2008-12-19 20:12:00 (122 views)
  - Are you suggesting just using the aux fan - sleis 2008-12-19 23:40:53 (89 views)
    - Re: Are you suggesting just using the aux fan - Hitmanx 2008-12-22 17:57:50 (90 views)
    - You will need both unless you go with a setup like - sfdon 2008-12-20 01:02:34 (109 views)
- I installed an electric fan on my Pathfinder after the fan clutch seized. - demet 2008-12-19 18:45:47 (107 views)
  - Re: I installed an electric fan on my Pathfinder after the fan clutch seized. - sleis 2008-12-19 23:30:32 (85 views)

scuttle leaks (general question) & dash removal. - mrb10 2008-12-18 05:12:49 (119 views)
- erm....Whats a *Scuttle*..?? (nt) - wabiker 2008-12-19 10:52:52 (86 views)
- Re: scuttle leaks (general question) & dash removal. - sfdon 2008-12-18 10:01:48 (107 views)
  - good call sfdon, I'll let the guy know. Thanks (nt) - mrb10 2008-12-18 11:00:57 (88 views)
    - Also check - BMW1066 2008-12-18 15:35:13 (102 views)
      - he's been told that you can see where the water is coming in from - mrb10 2008-12-18 16:29:03 (93 views)
        
        Well is ruddy hard to see up there lol but if that can see it. - BMW1066 2008-12-20 18:41:44 (90 views)
        
        Re: Well is ruddy hard to see up there lol but if that can see it. - goms187 2008-12-22 10:55:31 (97 views)