The 7 Series E23 Forum

5-speed swap - jrodriquez70 2009-04-16 18:36:50 (117 views)
- Re: 5-speed swap - sicstang03 2009-11-11 10:00:19 (0 views)
- Re: 5-speed swap - Hitmanx 2009-04-24 20:46:52 (54 views)
  - I forgot that part... and... - James '84 745i 2009-04-24 22:48:59 (78 views)
  - Re: 5-speed swap - strobachyzoo 2009-04-24 22:24:27 (49 views)
    - Re: 5-speed swap - Hitmanx 2009-04-25 15:10:15 (60 views)
- Re: 5-speed swap - James '84 745i 2009-04-18 22:48:43 (104 views)
  - don't forget to re-surface your new flywheel. - sfdon 2009-04-23 10:26:37 (53 views)
- Clutch, flywheel, right driveshaft, pedals etc. (nt) - Roy In GA 2009-04-17 01:11:47 (95 views)

obc troubleshooting - 06impreza 2009-04-19 19:52:03 (108 views)
- obc II lightbar - 944s 2009-10-22 15:52:50 (0 views)
- Here you go...sounds like you have OBC I (url) - Vern 2009-04-21 23:30:30 (94 views)
  - Thanks found that link last nite... I changed it today and its up and running! - 06impreza 2009-04-22 00:20:43 (74 views)
    - I could tell it was a 1984 after loading your pic and saw the instrument cluster - Vern 2009-04-22 01:54:04 (76 views)
- Probably the control module?? Or something else?? (nt) - 06impreza 2009-04-20 20:56:12 (56 views)
- edit: just looked at bulb again.. might be bad.. looks like trip to radio shack - 06impreza 2009-04-19 19:54:59 (64 views)
  - Re: edit: bulb in euro obc is good but display not lighting up (nt) - 06impreza 2009-04-19 20:03:05 (72 views)

vlave cover baffle plate broke off- will this harm my engine? (pic) - cpseapeacp 2009-04-17 18:36:30 (116 views)
- Re: vlave cover baffle plate broke off- will this harm my engine? - zecrazysvierge 2009-07-09 18:21:49 (13 views)
- The lack of the baffle plate will mean more oil going to the - kff 2009-04-17 19:23:54 (73 views)

l - lineman1959no spark 2009-04-26 20:40:20 (83 views)
- No spark - lineman1959 2009-04-26 20:48:57 (115 views)
  - Have you tired the obc relay - clemsoncpa08 2009-04-27 16:33:17 (109 views)
    - Re: Have you tired the obc relay - lineman1959 2009-04-27 20:22:34 (109 views)
      - Please post the model and year when you post a question... - Vern 2009-04-28 00:35:01 (99 views)
        
        Re: Please post the model and year when you post a question... - lineman1959 2009-04-29 18:36:54 (90 views)
        
        Progress? - lineman1959 2009-04-30 00:31:48 (99 views)
        
        Do you have the electrical troubleshooting manual for - kff 2009-04-30 10:01:14 (101 views)
        
        Resolution? - samsonevickis 2009-07-02 11:34:04 (19 views)

'83 733i Parting-out or whole car. - scott733i 2009-04-25 09:48:58 (145 views)
- Re: '83 733i Parting-out or whole car. - donstevens 2009-05-25 11:49:37 (36 views)
- Re: '83 733i Parting-out or whole car. - u00jdj2 2009-05-02 08:13:41 (94 views)

A/C compressor? - sgstudioguitar 2009-04-28 15:07:53 (130 views)
- Re: A/C compressor? - earthscience8 2009-05-20 22:39:45 (83 views)
  - Re: A/C compressor? - Hitmanx 2009-05-21 19:40:32 (59 views)
- Re: A/C compressor? - clemsoncpa08 2009-04-28 15:35:27 (127 views)
  - Re: A/C compressor? - earthscience8 2009-05-01 23:52:24 (101 views)
    - Low pressure switch won't let the clutch engage. Does clutch engage? (nt) - Roy In GA 2009-05-02 00:58:38 (115 views)
      - Re: Low pressure switch won't let the clutch engage. Does clutch engage? - earthscience8 2009-05-02 10:36:17 (92 views)
        
        Re: Low pressure switch won't let the clutch engage. Does clutch engage? - Hitmanx 2009-05-02 19:36:45 (105 views)
  - Re: A/C compressor? - sgstudioguitar 2009-04-28 15:51:24 (122 views)
    - Joe Gisler sells then rebuilt for 150 bucks.... (nt) - sfdon 2009-04-28 19:16:25 (134 views)

Overheating Problem... (pic) - basim007 2009-04-23 11:06:15 (189 views)
- Re: Overheating Problem... - Area52 2009-04-24 08:50:45 (102 views)
  - Re: Overheating Problem... - basim007 2009-04-25 05:19:09 (70 views)
- Re: Overheating Problem... - basim007 2009-04-24 07:46:22 (94 views)
  - 1st test is grab both radiator hoses- - sfdon 2009-04-24 11:08:11 (86 views)
    - Re: Overheating Problem... (pic) - basim007 2009-05-21 17:16:29 (50 views)

Will speedo/gauge cluster from 1982 745 work in my 84 733i? - 06impreza 2009-04-22 02:34:35 (95 views)
- Hmmm - 06impreza 2009-05-02 18:09:52 (86 views)
  - Anyone want the euro cluster?? - 06impreza 2009-05-03 19:20:36 (57 views)
    - Is it just the gears that are trashed? (nt) - Vern 2009-05-06 14:21:33 (50 views)
      - Needs gears and batteries.. Board is just 'dirty' i can incluse the batteries (nt) - 06impreza 2009-05-06 15:25:56 (48 views)
- Yes, you can swap the clusters. Do a swap of your speedometer - Vern 2009-04-23 00:17:12 (90 views)
  - Re: Yes, you can swap the clusters. Do a swap of your speedometer - Hitmanx 2009-05-19 03:05:13 (40 views)
  - Re: Yes, you can swap the clusters. Do a swap of your speedometer - 06impreza 2009-04-23 00:58:35 (98 views)
    - yup! (nt) - Vern 2009-04-23 01:31:07 (74 views)

Flex Disc/Guibo replacement + driveshaft Q - Hitmanx 2009-04-23 01:14:50 (104 views)
- The Arrows point to the Flange Arms - kff 2009-04-23 09:44:21 (83 views)
  - Re: The Arrows point to the Flange Arms - Hitmanx 2009-04-23 13:35:57 (80 views)
- I don't think it's the bolt orientation that's important... - demet 2009-04-23 08:51:27 (82 views)
  - I believe the arrows indicate the bolt direction... (nt) - strobachyzoo 2009-04-23 08:59:31 (89 views)
    - Doubt it. Have you ever tried putting the bolts in the other way? (nt) - demet 2009-04-23 20:48:35 (86 views)
- Re: Flex Disc/Guibo replacement + driveshaft Q - sfdon 2009-04-23 01:57:13 (107 views)
  - Re: Flex Disc/Guibo replacement + driveshaft Q - Hitmanx 2009-04-23 13:37:07 (98 views)
    - Re: Flex Disc/Guibo replacement + driveshaft Q - sfdon 2009-04-23 13:46:58 (77 views)
      - Re: Flex Disc/Guibo replacement + driveshaft Q - Hitmanx 2009-04-23 21:14:49 (91 views)
        
        A few thoughts on trannies. - sfdon 2009-05-11 13:59:25 (74 views)

Is an adjustable FPR worth it on my 733i?? - 06impreza 2009-04-27 21:14:25 (127 views)
- To answer the ?... Yes it is.. Runs much better now! - 06impreza 2009-05-09 21:23:09 (82 views)
- A few comments... actually a long trouble shooting list - johnhstein, 85-M6CSi, 85 745i 2009-04-29 09:08:14 (105 views)
  - Re: A few comments... actually a long trouble shooting list - 06impreza 2009-04-29 12:14:29 (99 views)
    - You missed the most important questions.... - johnhstein, 85-M6CSi, 85 745i 2009-05-01 10:41:43 (99 views)
- Re: Is an adjustable FPR worth it on my 733i?? - Hitmanx 2009-04-27 21:34:39 (98 views)
  - Well it might bw close to shot.. Car bogs down a lot on hills.. Throttle - 06impreza 2009-04-27 22:34:43 (82 views)
    - You need to determine by connecting a gauge... - Vern 2009-04-27 22:55:26 (97 views)
    - Re: Well it might bw close to shot.. Car bogs down a lot on hills.. Throttle - Hitmanx 2009-04-27 22:44:30 (74 views)
      - tmost everything is new within 2k miles - 06impreza 2009-04-28 00:14:21 (80 views)
        
        If you were running below 10 volts (ABS light was on) - Vern 2009-04-28 00:30:14 (80 views)
        
        No abs light.. (nt) - 06impreza 2009-04-28 00:33:34 (91 views)

735i Fuel grade - earthscience8 2009-05-02 00:02:34 (115 views)
- The US car uses regular fuel The Euro cars like premium. (nt) - kff 2009-05-02 08:51:44 (104 views)
  - Re: The US car uses regular fuel The Euro cars like premium. - earthscience8 2009-05-02 10:29:00 (110 views)
    - The tenth character of the VIN will be a letter for the US car - kff 2009-05-02 11:46:35 (116 views)
      - Also the US cars have big ugly bumpers. (nt) - Roy In GA 2009-05-02 17:53:25 (112 views)
        
        But they are useful for holding the beer while waxing the car. (nt) - kff 2009-05-02 19:34:59 (94 views)
        
        So what happens if you get wax in your beer? (nt) - clemsoncpa 2009-05-04 16:36:27 (100 views)
        
        I would pass out from too much beer (nt) - kff 2009-05-06 21:30:50 (79 views)
        
        kff sits on the US bumper enjoying a bud while Carmen Electra waxes his fenders (nt) - phathome 2009-05-04 12:12:32 (102 views)
        
        Re: kff sits on the US bumper enjoying a bud while Carmen Electra waxes his fenders - Hitmanx 2009-05-06 20:14:24 (79 views)
        
        Waxes his WHAT ???? :-) (nt) - johnhstein, 85-M6CSi, 85 745i 2009-05-08 12:02:20 (76 views)

US DOT front bumper removal? - Hitmanx 2009-04-25 21:14:17 (133 views)
- Easy as pie. To remove the bumper, pull the trim from the center to access two (pic) - DavidC 2009-04-27 02:34:03 (196 views)
  - Isn't that easy as cake? (nt) - demet 2009-04-28 14:35:28 (99 views)
    - Re: Isn't that easy as cake? - lairtok 2009-05-03 06:16:58 (114 views)
      - The bumper shocks are bolted on, too. As for the rear bumper... (pic) - DavidC 2009-05-03 13:46:04 (129 views)
  - Re: Easy as pie. To remove the bumper, pull the trim from the center to access two - Hitmanx 2009-04-27 19:33:54 (93 views)
    - Re: Thanks!!! - lairtok 2009-05-03 23:02:00 (81 views)

STILL can't turn car off after replacing ignition switch - wagonizzle 2009-04-18 18:23:17 (105 views)
- send me an email......... (nt) - sfdon 2009-05-03 11:02:04 (38 views)
- Re: STILL can't turn car off after replacing ignition switch - wagonizzle 2009-04-18 18:40:12 (79 views)
  - does the engine or the starter keep going? (nt) - sfdon 2009-04-18 20:23:10 (77 views)
    - Re: does the engine or the starter keep going? - wagonizzle 2009-04-18 23:18:55 (60 views)
      - Turn your key off and walk around the car to - sfdon 2009-04-18 23:47:07 (76 views)
        
        Re: Turn your key off and walk around the car to - wagonizzle 2009-04-19 14:32:13 (55 views)
        
        Not knowing what car you have- - sfdon 2009-04-19 17:28:52 (52 views)
        
        Re: Not knowing what car you have- - wagonizzle 2009-04-19 17:38:47 (70 views)
        
        OBC1 or OBC 2? - sfdon 2009-04-20 10:42:08 (74 views)
        
        Re: OBC1 or OBC 2? - wagonizzle 2009-04-21 18:25:22 (78 views)
        
        A few ideas... Pull the unloader relays in the fuse box - sfdon 2009-04-21 19:08:04 (60 views)
        
        Re: A few ideas... Pull the unloader relays in the fuse box - wagonizzle 2009-04-21 19:57:26 (50 views)
        
        Do this......... By the ecu you will find a 3 wire flat - sfdon 2009-04-21 22:47:34 (107 views)
        
        Re: Do this......... By the ecu you will find a 3 wire flat (url) - wagonizzle 2009-04-22 13:21:44 (61 views)
        
        order a new relay 1st.. (pic) - sfdon 2009-04-22 14:22:01 (99 views)
        
        Re: order a new relay 1st.. - wagonizzle 2009-04-22 14:32:21 (61 views)
        
        That is the correct main relay number ....112 - sfdon 2009-04-22 14:57:28 (59 views)
        
        Re: That is the correct main relay number ....112 - wagonizzle 2009-04-22 15:02:38 (63 views)
        
        more info..... - sfdon 2009-04-22 15:09:37 (57 views)
        
        replaced relay - no change (nt) - wagonizzle 2009-04-28 16:31:20 (47 views)
        
        Time to isolate the circuits......... - sfdon 2009-04-28 19:15:20 (39 views)
        
        Re: Time to isolate the circuits......... - wagonizzle 2009-04-30 15:25:29 (43 views)
        
        so what about this obc relay? - wagonizzle 2009-05-02 13:25:31 (35 views)
        
        Re: so what about this obc relay? - sfdon 2009-05-02 14:51:22 (55 views)
        
        more info of my own..... - wagonizzle 2009-04-23 15:55:51 (49 views)
        
        Time for a dc amp meter - sfdon 2009-04-24 11:04:34 (58 views)
        
        Re: Do this......... By the ecu you will find a 3 wire flat (url) - wagonizzle 2009-04-22 13:23:21 (59 views)
        
        Perhaps I should mention... - wagonizzle 2009-04-19 14:48:00 (52 views)
        
        Pins 4+6 are jumped (nt) - wagonizzle 2009-04-19 15:16:36 (65 views)

air conditioner compressor relay location 735i 1986 - earthscience8 2009-05-01 23:38:35 (111 views)
- Should be one of the relays beside the blower, maybe the right. - demet 2009-05-02 09:34:57 (96 views)
- Re: air conditioner compressor relay location 735i 1986 - sfdon 2009-05-02 02:26:23 (123 views)
- On PC card behind the switch buttons I think if like my 81. (nt) - Roy In GA 2009-05-02 01:08:02 (86 views)
- Re: air conditioner compressor relay location 735i 1986 (nt) - earthscience8 2009-05-01 23:43:58 (94 views)

5 amp air conditioning fuse near glove box - earthscience8 2009-05-01 23:40:00 (92 views)
- The ETM lists it as a 5 amp fuse so you can use a - kff 2009-05-02 09:07:16 (86 views)

Bosch Platinum 4 spark plugs - earthscience8 2009-05-02 00:00:05 (104 views)
- Bosch Platinum 4 spark plugs don't work in the M30 motor - kff 2009-05-02 08:54:12 (131 views)

HVAC wiring Q? - sgstudioguitar 2009-04-16 13:14:41 (100 views)
- anyone?..more - sgstudioguitar 2009-04-18 16:58:05 (70 views)
  - Re: anyone?..more - clemsoncpa08 2009-04-18 21:03:01 (47 views)
    - Re: anyone?..more - sgstudioguitar 2009-04-18 21:08:45 (52 views)
      - Re: anyone?..more - clemsoncpa08 2009-04-18 21:18:12 (51 views)
        
        Re: anyone?..more - earthscience8 2009-04-21 21:49:05 (65 views)
        Re: anyone?..more - sgstudioguitar 2009-04-18 22:17:00 (56 views)
        
        these are the wires behind the instrument cluster (nt) - sgstudioguitar 2009-04-18 22:17:58 (76 views)
        
        Re: these are the wires behind the instrument cluster - earthscience8 2009-05-01 23:47:58 (30 views)

A/C capacity? - Hitmanx 2009-04-29 17:32:19 (112 views)
- I only use synthetic oil- expensive but worth it - sfdon 2009-05-01 10:47:45 (114 views)
  - Re: I only use synthetic oil- expensive but worth it - Hitmanx 2009-05-01 18:35:42 (89 views)
    - Harvest? You planted condensers? lol - sfdon 2009-05-01 18:45:33 (97 views)
  - Not only get the 85 on condensor but the smaller pulley - ejonesie22 2009-05-01 17:15:06 (104 views)
    - Re: Not only get the 85 on condensor but the smaller pulley - Hitmanx 2009-05-01 18:46:41 (98 views)
- Re: A/C capacity? - rgrimespe 2009-04-30 15:34:19 (108 views)
  - Re: A/C capacity? - Hitmanx 2009-04-30 21:54:25 (92 views)
    - Are you using R-12 though? - ejonesie22 2009-05-01 17:09:36 (95 views)
      - Re: Are you using R-12 though? - Hitmanx 2009-05-01 18:44:15 (96 views)
      - Re: Are you using R-12 though? - sfdon 2009-05-01 18:08:44 (82 views)

Fan Pulley Holder Image Anyone? (pic) - Oka 2009-04-26 23:31:18 (197 views)
- Here's some measurements from mine... (pic) - demet 2009-04-27 09:16:29 (153 views)
  - Re: Here's some measurements from mine... - Oka 2009-04-27 12:44:29 (93 views)
    - Correction - It's $50 per car (Not per tire). (nt) - Oka 2009-05-01 03:26:03 (74 views)
    - wasting your money........ - sfdon 2009-04-28 19:21:18 (87 views)
      - Built mine so that I could remove one that SOMEBODY installed with thread lock. - demet 2009-04-28 21:48:31 (86 views)
      - Then be sure to use anti-seize on the new fan clutch. - kff 2009-04-28 20:17:56 (97 views)

I think I'm going to be sick... (url) - James '84 745i 2009-04-29 00:44:03 (165 views)
- A roll bar so track ready. Lots of good parts on that car - kff 2009-04-29 16:38:26 (88 views)
- MY EYES!!!! WHAT HAVE YOU DONE TO MY EYES!!! - clemsoncpa 2009-04-29 15:39:26 (95 views)
- Re: I think I'm going to be sick... - brooklyn 2009-04-29 01:48:11 (70 views)

will 1000mAh batteries work on si or do they need to ve 700mAh? - 06impreza 2009-04-29 00:01:46 (94 views)
- The 1000's will work. Just charge them before installing. (nt) - Vern 2009-04-29 04:21:00 (89 views)

Windshield sprayer - goms187 2009-04-28 11:57:23 (97 views)
- The wires are for the heating elements. - demet 2009-04-28 14:34:12 (76 views)
  - The check valve was my next thought - goms187 2009-04-28 15:38:34 (89 views)
    - Good question. Without intensive cleaning you may have only one. - demet 2009-04-28 21:54:48 (90 views)

blower fan bearing removal - johns735i 2009-04-19 15:39:30 (111 views)
- Just checked- I have 3 spares including 1 that is - sfdon 2009-04-20 14:01:54 (115 views)
  - sold.... (nt) - sfdon 2009-04-24 11:06:13 (71 views)
  - pic (pic) - sfdon 2009-04-20 14:53:23 (195 views)
- Throw it away and go to the boneyard and - sfdon 2009-04-19 17:15:16 (102 views)
  - or just get a new blower for ~ 250 - clemsoncpa08 2009-04-19 17:50:06 (105 views)
    - Or aftermarket brand new Fasco for $45. - demet 2009-04-19 19:37:55 (101 views)
      - Here's the link (url) - demet 2009-04-19 19:44:56 (117 views)
        
        The 49.00 Fan still blows... - ejonesie22 2009-04-19 23:13:20 (82 views)
- Re: blower fan bearing removal (nt) - johns735i 2009-04-19 15:41:43 (76 views)
- Re: blower fan bearing removal (nt) - johns735i 2009-04-19 15:41:04 (105 views)
  - Re: blower fan bearing removal - scott 2009-04-24 18:58:09 (93 views)
    - SFDON please read - scott 2009-04-24 18:59:38 (78 views)
      - shipped today also Demets and Marks stuff... (nt) - sfdon 2009-04-28 19:23:23 (74 views)
      - Ummm -ok. Turns out I have 8 of them available - sfdon 2009-04-25 08:56:59 (80 views)
        
        Re: Ummm -ok. Turns out I have 8 of them available - Hitmanx 2009-04-26 18:53:08 (87 views)
        
        I am traveling- just call me tomorrow. (nt) - sfdon 2009-04-26 19:30:36 (77 views)
        
        SFDON blower motor - matthewt 2009-04-26 16:22:06 (67 views)
        
        done.... (nt) - sfdon 2009-04-26 19:32:58 (62 views)

Need some tips!! - sgstudioguitar 2009-04-27 21:14:33 (103 views)
- you can buy the solenoid seperately, - clemsoncpa08 2009-04-28 16:00:03 (79 views)
- You can do it without removing the manifold. (pic) - demet 2009-04-27 21:31:21 (169 views)
  - THANKS!!! that was stupid of me I never even thought bout that lol (nt) - sgstudioguitar 2009-04-28 15:01:08 (73 views)

Headlight electrical fault - clemsoncpa08 2009-04-28 15:42:34 (89 views)

Blower fan stopped working - jagz 2009-04-21 14:59:03 (160 views)
- You should have the early resistor wire pack under the fan - Vern 2009-04-22 01:46:56 (84 views)
  - That resistor has an overheat feature that fails... - sfdon 2009-04-22 11:39:04 (93 views)
    - Vern, did the book have any electrical diagrams for the AC area or vac diagrams? (nt) - Roy In GA 2009-04-22 22:23:18 (85 views)
      - Vern, I have a 2/80 Euro Shop book and there is a 37 page section on the AC. It - Roy In GA 2009-04-22 22:36:05 (80 views)
        
        Doh !!! That would help, huh? I do have the whole facory manual... - Vern 2009-04-22 23:56:17 (57 views)
- 1 thru 3 for 78 and 79 schematics...56 k alert !!! make a sandwich (pic) - Vern 2009-04-22 01:42:31 (115 views)
- 2nd of 3 posts for schematics (pic) - Vern 2009-04-22 01:41:23 (94 views)
- Here is a set of the '78 and '79 schematics...56 k alert! Massive pics (pic) - Vern 2009-04-22 01:38:42 (102 views)
  - Re: Here is a set of the '78 and '79 schematics...56 k alert! Massive pics - jagz 2009-04-22 12:04:05 (73 views)
    - You got it, Jagz. When I scan the A/C portion of the manual, I'll email that too (nt) - Vern 2009-04-23 00:04:55 (54 views)
      - Re: You got it, Jagz. When I scan the A/C portion of the manual, I'll email that too - jagz 2009-04-23 16:31:00 (76 views)
        
        So, you got the schematics in email? Still working on the rest (nt) - Vern 2009-04-28 00:39:19 (63 views)
- Not sure if the electronics are similar but - clemsoncpa08 2009-04-21 15:37:54 (96 views)
  - Still need help - jagz 2009-04-21 20:32:25 (95 views)
    - You appear to have the OLD style system with the big 3 selector knobs. I have - Roy In GA 2009-04-21 23:48:42 (75 views)
  - Re: Not sure if the electronics are similar but - jagz 2009-04-21 15:57:19 (85 views)
  - Re: Not sure if the electronics are similar but - jagz 2009-04-21 15:57:11 (77 views)

Oil not circulating. - masterkale 2009-04-26 20:23:18 (81 views)
- Try filling the filter with oil...It's messy, but I do it every change... - Vern 2009-04-28 00:19:51 (59 views)
- Re: Oil not circulating. - Hitmanx 2009-04-27 18:40:38 (74 views)
- A little more information. - masterkale 2009-04-27 01:22:48 (75 views)

I have had 3 Brain boxes over the years for my OBC1. I am gathering parts for an (url) - Roy In GA 2009-04-25 18:56:38 (62 views)
- Roy, you'll need item # 12...it's the OBC relay cable - Vern 2009-04-27 18:56:50 (58 views)
  - Thanks Vern. I'm looking at pulling some wires this week from a junker (nt) - Roy In GA 2009-04-28 00:02:36 (67 views)

Need to replace SLS lines... - brooklyn 2009-04-26 21:20:56 (90 views)
- Re: Need to replace SLS lines... - Hitmanx 2009-04-26 22:24:50 (93 views)
  - Re: Need to replace SLS lines... (pic) (url) - brooklyn 2009-04-26 22:41:20 (150 views)
    - Re: Need to replace SLS lines... - Hitmanx 2009-04-26 23:43:13 (102 views)
      - You could probably have a hydraulics shop flare some steel (url) - Roy In GA 2009-04-27 00:30:32 (95 views)
        
        Re: You could probably have a hydraulics shop flare some steel - brooklyn 2009-04-27 00:37:08 (79 views)
        
        Re: You could probably have a hydraulics shop flare some steel - Hitmanx 2009-04-27 18:38:05 (79 views)
        Re: You could probably have a hydraulics shop flare some steel - brooklyn 2009-04-27 00:40:54 (83 views)
        
        After reading the parts list more... - brooklyn 2009-04-27 01:52:53 (91 views)

Where can I get this hose? 1984 745i (pic) (url) - brooklyn 2009-04-26 19:12:14 (193 views)
- Re: Where can I get this hose? 1984 745i - Hitmanx 2009-04-26 19:34:25 (120 views)
  - A Hydraulic shop can put your a new hose on your old fittings. The low pressure - Roy In GA 2009-04-27 00:13:19 (76 views)
  - Re: Where can I get this hose? 1984 745i - brooklyn 2009-04-26 19:57:16 (79 views)
    - Re: Where can I get this hose? 1984 745i - Hitmanx 2009-04-26 22:10:58 (72 views)

will 85 735 front /rear doors fit an 82 733 shark nose? - cpseapeacp 2009-04-22 23:25:54 (78 views)
- different part numbers so I don't know (url) - kff 2009-04-24 19:24:23 (75 views)
  - I bet the difference in P/Ns is something to do with internal reinforcement. (nt) - Roy In GA 2009-04-27 00:06:21 (67 views)

e23 dash board wanted - grsmonkey 2009-04-26 22:47:12 (75 views)

The last few things I need in order to finally start it up. (pic) - masterkale 2009-04-24 04:26:41 (214 views)
- The second picture is the vapor valve. When the coolant heats up (url) - kff 2009-04-24 10:00:06 (113 views)
  - I have a 733i - masterkale 2009-04-24 15:29:31 (79 views)
    - Depending on where you live, you might just cap off the connection on the intake - Roy In GA 2009-04-24 19:04:04 (79 views)
      - I have a timing light. - masterkale 2009-04-24 20:13:46 (88 views)
        
        I don't know the timing for your car. I know that some of the earlier M30 engine - Roy In GA 2009-04-25 18:19:51 (65 views)

does anyone sell white gauge faces?? If not if i make some would - 06impreza 2009-04-24 00:30:08 (80 views)
- If Im not mistaken the - clemsoncpa08 2009-04-25 08:29:14 (73 views)

Unique Situation - Remote Start / Keyless Entry Installation - Oka 2009-04-25 00:05:19 (109 views)

Omg dipstick was shot - 06impreza 2009-04-23 22:59:12 (122 views)
- Any vacuum leaks cause a rougher idle so fixing this one - kff 2009-04-24 18:55:10 (98 views)

Removing fuel injector and replacing with new injectors - l7drdos 2009-04-24 10:05:03 (89 views)
- The fuel rail is bolted in place and keeps the injectors from - kff 2009-04-24 10:27:55 (88 views)

Is this how to remove voltage regulator? - 06impreza 2009-04-22 20:21:06 (100 views)
- Comes out in a rotational way since you need to - kff 2009-04-22 23:10:37 (85 views)
  - Ok its out.. No bmw part number on it.. - 06impreza 2009-04-22 23:48:42 (89 views)
    - Re: Ok its out.. No bmw part number on it.. - Hitmanx 2009-04-23 01:01:13 (103 views)
      - Does that really make a noticeable difference?? (nt) - 06impreza 2009-04-23 01:15:00 (80 views)
        
        Re: Does that really make a noticeable difference?? - Hitmanx 2009-04-23 13:33:49 (65 views)
      - Regulators are the same on many BMWs. (url) - Roy In GA 2009-04-23 01:10:57 (84 views)

IT WAS THE !@#$ BATTERY!!! - luquette 2009-04-22 11:14:13 (92 views)
- Re: IT WAS THE !@#$ BATTERY!!! - Hitmanx 2009-04-23 00:59:47 (71 views)
- I bought a battery from Kragen (same company as Checkers) - Vern 2009-04-22 23:59:02 (58 views)

Spark! - samsonevickis 2009-04-18 13:45:42 (111 views)
- Great news- Your-ecu,coil,main relay, ignition switch - sfdon 2009-04-18 20:32:38 (87 views)
  - My guess as well! - samsonevickis 2009-04-18 20:39:22 (69 views)
    - OK *sparky* here are the tests........ - sfdon 2009-04-18 21:10:26 (102 views)
      - Re: OK *sparky* here are the tests........ - samsonevickis 2009-04-22 15:36:43 (58 views)
        
        Re: OK *sparky* here are the tests........ - sfdon 2009-04-22 16:06:11 (55 views)
        
        Re: OK *sparky* here are the tests........ - samsonevickis 2009-04-22 16:44:56 (56 views)
        
        Sounds good..... (nt) - sfdon 2009-04-22 16:57:02 (54 views)
      - He probably likes that nickname right now. (nt) - kff 2009-04-18 23:58:57 (88 views)
        
        Re: He probably likes that nickname right now. - sfdon 2009-04-19 00:46:21 (100 views)

82 733i (1/;82) front bolt on exhaust side of valve cover is stripped- - cpseapeacp 2009-04-20 22:31:59 (81 views)
- be careful - different valve covers have - sfdon 2009-04-20 23:48:44 (79 views)
  - Re: be careful - different valve covers have - cpseapeacp 2009-04-22 10:32:19 (56 views)
    - This can get tricky.... - sfdon 2009-04-22 12:25:53 (56 views)

can someone post closeup of vacuum lines of passenger side - 06impreza 2009-04-19 22:11:44 (78 views)
- sorry, wrong year : ( (nt) - Vern 2009-04-22 02:53:54 (55 views)
- This will get you started... (url) - Vern 2009-04-22 00:18:33 (89 views)
- There are about 3 pages of diagrams showing all the parts and they have been - Roy In GA 2009-04-21 01:34:56 (77 views)

interior euro parts installed! - 06impreza 2009-04-19 19:06:43 (126 views)
- How do you tell what Check light is on? - kff 2009-04-20 21:50:53 (72 views)
  - Memory from the old one.. Thanks! (nt) - 06impreza 2009-04-20 22:17:49 (65 views)
    - That memory thing, that is what I am missing. - kff 2009-04-21 10:06:50 (79 views)
      - Re: That memory thing, that is what I am missing. - Vern 2009-04-21 23:43:17 (67 views)
- Re: interior euro parts installed! - Hitmanx 2009-04-19 19:48:52 (74 views)
  - Yeah euro is much better.. (nt) - 06impreza 2009-04-19 20:04:26 (80 views)

can someone post closeup of vacuum (nt) - 06impreza 2009-04-19 22:10:55 (106 views)
- My camera is pretty bad at doing closeups of vacuum. (nt) - demet 2009-04-19 22:20:36 (91 views)
  - NASA may be able to help (nt) - kff 2009-04-20 21:49:05 (79 views)
    - inside Paris Hilton's head there is vacuum (nt) - philipuk 2009-04-21 16:25:26 (75 views)
      - So that's why she was so skillful in that home video! (nt) - samspade 2009-04-21 21:35:51 (68 views)
      - Phil: you got it all wrong... - Area52 2009-04-21 21:12:45 (76 views)
      - Well her pictures are all over the web. (nt) - kff 2009-04-21 20:13:23 (83 views)

Oil Pan Removal - masterkale 2009-04-19 14:10:10 (131 views)
- Re: Oil Pan Removal - Hitmanx 2009-04-19 19:52:24 (63 views)
- Yup. 2x4 laid flat under each engine mount is what you need. - demet 2009-04-19 19:40:17 (92 views)
  - I keep a set of wooden blocks for that job - sfdon 2009-04-21 01:16:49 (73 views)
    - Re: I keep a set of wooden blocks for that job - masterkale 2009-04-21 21:11:28 (72 views)

Need Front Seats (pic) - l7jims 2009-04-19 19:49:34 (169 views)
- Re: Need Front Seats - Hitmanx 2009-04-21 18:59:25 (73 views)
- Re: Need Front Seats - sgstudioguitar 2009-04-21 07:44:10 (96 views)
  - These are tough to find... - Area52 2009-04-21 20:58:06 (55 views)

dead battery even with trickle charger - luquette 2009-04-21 10:57:09 (111 views)
- Update... - luquette 2009-04-21 10:57:45 (80 views)
  - .1 amps is normal- remember that your OBC and - sfdon 2009-04-21 12:01:58 (75 views)
    - My tests have shown below 50ma with the car off. I think 100ma is on the high - Roy In GA 2009-04-21 13:35:45 (73 views)
      - My mistake... move the decimal point over one... - sfdon 2009-04-21 15:51:41 (75 views)

Belt Tension - Oka 2009-04-20 14:23:05 (76 views)
- Re: Belt Tension - sgstudioguitar 2009-04-20 18:01:32 (74 views)
  - Re: Belt Tension - Oka 2009-04-20 23:07:22 (73 views)
    - Re: Belt Tension - sgstudioguitar 2009-04-21 07:33:06 (67 views)

whats this connector for??? - 06impreza 2009-04-19 16:46:47 (77 views)
- Not sure but mine isn't connected either. (nt) - demet 2009-04-19 19:35:16 (70 views)
  - Digital Clock (nt) - Area52 2009-04-19 20:43:18 (56 views)

Non TRX tires on TRX rims? - samsonevickis 2009-04-15 12:57:14 (107 views)
- I only know of two tires that were made in METRIC sizes - kff 2009-04-15 13:54:28 (99 views)
  - cheaper to - clemsoncpa08 2009-04-15 15:35:38 (88 views)
    - You may also be able to find a set of 16 inch basketweaves from an e38 cheap. (nt) - Roy In GA 2009-04-15 15:49:59 (70 views)
      - What about these? - samsonevickis 2009-04-16 01:05:08 (83 views)
      - Re: You may also be able to find a set of 16 inch basketweaves from an e38 cheap - samsonevickis 2009-04-15 18:07:34 (72 views)
        
        you should be able to find a set for cheap - 06impreza 2009-04-15 19:14:06 (72 views)
        
        Looking for BMW rims - samsonevickis 2009-04-15 22:24:42 (63 views)
        
        Re: Looking for BMW rims - 06impreza 2009-04-16 00:20:56 (77 views)
        
        e38 style 5 wheels (basketweave) have an offset of 23 for the 16 inchers. (nt) - Roy In GA 2009-04-17 01:16:47 (95 views)
        
        What does that mean exactly? - samsonevickis 2009-04-17 01:37:11 (74 views)
        
        Must be good as the other post below says 18 to 23 is Good. Offset - Roy In GA 2009-04-17 12:38:36 (49 views)
        
        Good! - samsonevickis 2009-04-18 00:00:47 (51 views)
        
        I've used them a couple of times through ebay - clemsoncpa08 2009-04-19 12:21:02 (42 views)
        No but I used a guy in Selma a couple of times. (nt) - Roy In GA 2009-04-19 01:01:32 (41 views)

Removing fuel injector and replacing with new injectors - l7drdos 2009-04-17 10:24:22 (123 views)
- Re: Removing fuel injector and replacing with new injectors - Hitmanx 2009-04-17 21:41:27 (96 views)
  - Same guy I used. (nt) - Roy In GA 2009-04-18 00:55:50 (71 views)
    - Hey Roy- - sfdon 2009-04-18 20:35:47 (86 views)
      - Wow, is right... - Vern 2009-04-19 02:35:43 (83 views)
- No special tools needed. Be sure to use new rubber seals. Cut off old clamps and - Roy In GA 2009-04-17 12:51:28 (72 views)
  - Why not just ultrasonic them? - samsonevickis 2009-04-18 00:03:22 (52 views)
    - How are you going to cycle them? (nt) - Roy In GA 2009-04-18 00:59:57 (54 views)
      - Re: How are you going to cycle them? - samsonevickis 2009-04-18 01:16:27 (72 views)
        
        I meant opening and closing the injector needles. (nt) - Roy In GA 2009-04-19 01:14:31 (65 views)

Transmission Rear Seal - clemsoncpa08 2009-04-18 21:11:23 (88 views)
- ATF is cheap and a 30 mm deep thin walled socket - sfdon 2009-04-18 21:20:39 (87 views)
  - Nice way yo look at it. A cheap 30 mm thin walled socket... - kff 2009-04-18 23:58:05 (67 views)
    - If you have a grinder.................... - sfdon 2009-04-19 00:38:53 (74 views)

Where to buy a fan clutch? - jeremypierson 2009-04-18 01:29:09 (74 views)
- Autohausaz - sfdon 2009-04-18 01:58:41 (74 views)

No Start II - samsonevickis 2009-04-14 12:21:25 (102 views)
- Re: No Start II - samsonevickis 2009-04-14 12:31:12 (81 views)
  - Re: No Start II - samsonevickis 2009-04-14 12:40:30 (90 views)
    - I thought DME was the - clemsoncpa08 2009-04-14 15:37:26 (94 views)
      - Re: I thought DME was the - samsonevickis 2009-04-14 16:03:06 (87 views)
        
        Study the early pages of the ETM. The main relay supplies power to the fuel pump - Roy In GA 2009-04-14 17:47:12 (95 views)
        
        Re: Study the early pages of the ETM. The main relay supplies power to the fuel - samsonevickis 2009-04-14 19:08:08 (94 views)
        
        Set your votmeter to DC 20 volt range..... - sfdon 2009-04-14 21:02:42 (94 views)
        
        Re: Set your votmeter to DC 20 volt range..... - samsonevickis 2009-04-14 21:18:12 (86 views)
        
        Don, I did it! - samsonevickis 2009-04-15 22:28:57 (72 views)
        
        Umm... did you test with the relay in? - sfdon 2009-04-16 02:07:15 (97 views)
        
        Re: Umm... did you test with the relay in? - samsonevickis 2009-04-16 02:58:30 (69 views)
        
        you didn't answer the questions- - sfdon 2009-04-16 11:14:41 (84 views)
        
        I have answers now. - samsonevickis 2009-04-16 12:55:06 (85 views)
        
        Hooo-Waaaa - sfdon 2009-04-16 17:11:55 (81 views)
        
        How did I miss this post???? - samsonevickis 2009-04-17 02:00:06 (73 views)
        
        A little spark probably won't kill you...... - sfdon 2009-04-17 11:15:28 (63 views)
        
        You do have insulated handles on your screwdrivers? Right LOL. (nt) - Roy In GA 2009-04-17 12:34:15 (56 views)
        
        ROFL .... (nt) - sfdon 2009-04-17 21:06:08 (70 views)
        
        I guess I'll find out for sure... (nt) - samsonevickis 2009-04-17 23:58:22 (63 views)
        
        Relay Part Number - samsonevickis 2009-04-16 13:00:20 (60 views)
        
        I think the BMW P/N is 61 31 1 362 386 and there is a diode in series with the - Roy In GA 2009-04-16 15:51:25 (67 views)
        
        I just called my BMW parts guy - samsonevickis 2009-04-16 16:06:45 (58 views)
        
        it's not your relay.... You need to check for where your - sfdon 2009-04-16 17:14:08 (78 views)
        
        Re: it's not your relay.... You need to check for where your - samsonevickis 2009-04-16 17:35:47 (74 views)
    - Re: No Start II - samsonevickis 2009-04-14 12:41:29 (72 views)
      - What happened to the volt meter? - sfdon 2009-04-14 16:14:49 (79 views)
        
        Re: What happened to the volt meter? - samsonevickis 2009-04-14 16:24:40 (78 views)

New E23 owner... (pic) - jeremypierson 2009-04-16 19:37:39 (255 views)
- 20W-50 is correct. Heavy but these cars like it. Also, - kff 2009-04-17 11:48:58 (116 views)
  - Re: 20W-50 is OK year round here in GA. (nt) - Roy In GA 2009-04-17 12:40:25 (87 views)
- CASTROL 20W-50 IN SUMMER/10W-40 WINTER DINO OR SYN-NICE CAR TOO (nt) - cpseapeacp 2009-04-17 08:07:56 (82 views)
- Color me jealous - samsonevickis 2009-04-16 23:31:08 (97 views)
  - Re: Color me jealous - jeremypierson 2009-04-17 16:07:35 (81 views)
    - The owner's manual has the Inspection I and II as well as - kff 2009-04-17 16:25:20 (87 views)

82 733i (1/82) rt front turn signal will not flash, but parking light comes on. - cpseapeacp 2009-04-17 08:41:52 (74 views)

Bumper Repair Glue - Oka 2009-04-17 03:25:20 (70 views)
- Found Lots Of Info - Googled - Oka 2009-04-17 04:00:44 (65 views)

Torque of bolts on cam gear - masterkale 2009-04-15 20:48:05 (64 views)
- Toothed belt pulley to camshaft, M6 bolts torque to 10Nm - kff 2009-04-15 22:17:56 (68 views)
  - My torque booklet says only 7Nm, 5 ftlb for sprocket to camshaft flange. (nt) - Roy In GA 2009-04-16 16:01:03 (51 views)

735i Replacement Wheels (pic) - earthscience8 2009-04-14 21:51:54 (237 views)
- Re: 735i Replacement Wheels - chicagomark 2009-04-15 00:36:26 (76 views)
  - Will this fit? 16x7.5 BBS RN, ET 15 (pic) - samspade 2009-04-16 11:47:58 (115 views)
  - '... offset around 18 to 23 work and look great on the e23 bodied cars ...' - samspade 2009-04-15 06:31:05 (77 views)
- They won't work on an e23. - demet 2009-04-14 22:49:50 (87 views)
  - Re: They won't work on an e23. - earthscience8 2009-04-15 11:41:59 (48 views)
  - Yeah i was gonna say... Try to find a 8' wide wheel with 20 offset - 06impreza 2009-04-14 23:52:49 (71 views)
  - Yeah i was gonna say... Try to find a 8' wide wheel with 20 (nt) - 06impreza 2009-04-14 23:49:33 (78 views)
- Re: 735i Replacement Wheels - samsonevickis 2009-04-14 22:18:58 (82 views)

Is it possible to retro fit the newer style wiper switch from an 82 528e(6/82) - cpseapeacp 2009-04-14 21:48:27 (56 views)

Horns? - Hitmanx 2009-04-13 21:08:16 (69 views)
- Re: Horns? - Hitmanx 2009-04-14 16:50:55 (60 views)
  - That would be a big 10-4. (nt) - demet 2009-04-14 19:03:48 (52 views)
- I think 400-500hz get piaa horns from bav auto they sound awesome - 06impreza 2009-04-13 22:13:12 (72 views)
  - Get these and sound like 10 Ferrari's (url) - demet 2009-04-13 22:38:36 (84 views)

Valve Body Repair Kits? - drive735 2009-04-13 22:24:58 (86 views)
- Try Jaggi in the Houston area. (nt) - Roy In GA 2009-04-13 23:21:33 (64 views)
  - Sorry, this was posted in the wrong forum....meant for the E34 forum (nt) - drive735 2009-04-13 23:46:13 (62 views)
    - Answer is still the same. (nt) - Roy In GA 2009-04-14 17:29:13 (60 views)

Not starting. - samsonevickis 2009-04-12 14:34:59 (95 views)
- With all your cars you should have your own ETK, TIS, WDS disks and have a good - Roy In GA 2009-04-13 23:35:52 (73 views)
  - Re: With all your cars you should have your own ETK, TIS, WDS disks and have a g - samsonevickis 2009-04-13 23:48:29 (79 views)
    - ETK (EPC) Electronic parts catalog for all BMW (new/old) and MINI, TIS repair - Roy In GA 2009-04-14 17:26:51 (94 views)
- Check that the main and fuel pump relays are both good - kff 2009-04-12 23:16:53 (83 views)
  - Re: Check that the main and fuel pump relays are both good - samsonevickis 2009-04-13 19:04:34 (77 views)
    - LOL - spam? That doesn't exist on thos board, right kff? - demet 2009-04-13 21:05:19 (71 views)
      - LOL - spam, I noticed that. as a mod, I would be surprised if I spammed - kff 2009-04-14 11:36:26 (90 views)
      - Re: LOL - spam? That doesn't exist on thos board, right kff? - samsonevickis 2009-04-13 21:17:48 (67 views)
        
        The ETMs are on e38.org/e23! (nt) - Roy In GA 2009-04-13 23:32:55 (70 views)
        
        Re: The ETMs are on e38.org/e23! - samsonevickis 2009-04-13 23:39:26 (71 views)
  - 5th entry in the Electronics section of the projects links page - kff 2009-04-13 11:34:15 (66 views)
  - Re: Check that the main and fuel pump relays are both good - samsonevickis 2009-04-13 00:03:12 (89 views)
- Checkout ... (url) - demet 2009-04-12 21:44:14 (84 views)
  - Re: Checkout ... - samsonevickis 2009-04-12 22:09:33 (72 views)
- Re: Not starting. - samsonevickis 2009-04-12 21:24:19 (73 views)
  - Make life simple..... - sfdon 2009-04-12 23:47:02 (74 views)
    - Re: Make life simple..... - samsonevickis 2009-04-13 00:05:27 (72 views)
      - Re: Make life simple..... - sfdon 2009-04-13 10:22:19 (77 views)
        
        Re: Make life simple..... - samsonevickis 2009-04-13 11:18:08 (73 views)
        
        No Spark! - samsonevickis 2009-04-13 16:32:06 (77 views)
        
        I've learned so much just today! - samsonevickis 2009-04-13 23:35:12 (62 views)
        
        Don't touch your fusebox until you get spark. (nt) - sfdon 2009-04-14 00:37:39 (66 views)
        
        Re: Don't touch your fusebox until you get spark. - samsonevickis 2009-04-14 01:07:32 (70 views)

OT - my e34 is starting to cross dress. (pic) - demet 2009-04-13 22:35:48 (159 views)
- Re: OT - my e34 is starting to cross dress. - samsonevickis 2009-04-13 23:05:15 (51 views)
  - I would put a set of Hellas in there...Looks nice, James (nt) - Vern 2009-04-14 16:07:40 (74 views)

84 733i Cam Timing - rgrimespe 2009-04-14 14:51:17 (76 views)

I found a 1983 733 parts car. - samsonevickis 2009-04-13 17:10:31 (64 views)
- The model change was in 9/82. Any car made after that (url) - kff 2009-04-14 11:42:47 (75 views)

I officially got my 7 today... - samsonevickis 2009-04-12 02:47:27 (74 views)
- A nice 1/86 produced US 735 with the rear reading lights - kff 2009-04-12 23:13:04 (66 views)
  - Re: A nice 1/86 produced US 735 with the rear reading lights - samsonevickis 2009-04-13 00:08:30 (65 views)
- Re: I officially got my 7 today... (pic) - samsonevickis 2009-04-12 02:55:10 (165 views)
  - Re: I officially got my 7 today... - Hitmanx 2009-04-12 18:34:32 (70 views)
  - That's amazing. - masterkale 2009-04-12 14:50:51 (78 views)
    - Re: That's amazing. - samsonevickis 2009-04-12 16:22:37 (70 views)
  - she's a beauty!! (nt) - Vern 2009-04-12 03:58:54 (65 views)

Electrical questions (pic) - samsonevickis 2009-04-12 16:35:05 (125 views)
- The last pic is of a now obsolete radar detector. - demet 2009-04-12 21:46:28 (71 views)
  - Re: The last pic is of a now obsolete radar detector. - samsonevickis 2009-04-12 22:06:04 (75 views)