The 7 Series E23 Forum

heater won't turn off - heater control valve? - rmillang 2008-09-21 15:55:09 (157 views)
- Re: heater won't turn off - heater control valve? - bambae23 2009-01-16 16:02:02 (60 views)
- The hot water valve defaults to the open position when it loses vacuum, which (url) - DavidC 2008-09-21 19:41:38 (156 views)
  - Re: The hot water valve defaults to the open position when it loses vacuum, whic - rmillang 2008-09-21 20:04:15 (124 views)
    - You could do that, but it's not really necessary. When the system - DavidC 2008-09-22 11:01:53 (126 views)
      - Water would go backwards through the core if you don't block it both ways. You - Roy In GA 2008-09-22 23:53:29 (113 views)
        
        How would it do that (as long as the core isn't leaking)? - DavidC 2008-09-24 10:05:12 (118 views)
        
        He said he would plug the hose from the engine. He also has to plug the - Roy In GA 2008-09-24 17:22:26 (121 views)
    - Yes. (nt) - Roy In GA 2008-09-21 23:16:18 (105 views)

sunroof motor removal, how? - mrb10 2008-11-11 05:44:01 (172 views)
- motor and relay (pic) - sfdon 2008-11-12 10:23:41 (254 views)
  - trim (pic) - sfdon 2008-11-12 10:38:00 (224 views)
- tried a new switch first? (nt) - sfdon 2008-11-12 02:05:00 (141 views)
  - no I haven't - mrb10 2008-11-12 07:48:40 (124 views)
    - sWAP A window switch with the roof switch (nt) - philipuk 2008-11-12 07:50:45 (135 views)
      - I reckon I need to do that first then do this - mrb10 2008-11-13 04:47:54 (134 views)
        
        sorted, all fixed! - mrb10 2008-12-14 08:30:52 (96 views)
        
        Bravo AG, really nice result. Have a beer to celebrate! (nt) - phathome 2008-12-14 15:44:30 (75 views)

'Brake Lining' light - is there a reset? - srw 2008-10-27 12:02:00 (198 views)
- Re: 'Brake Lining' light - is there a reset? - zecrazysvierge 2008-10-27 18:26:07 (201 views)
  - Re: 'Brake Lining' light - is there a reset? (url) - elbiera 2008-10-27 23:45:08 (213 views)
    - Thanks, I've ordered a pair (nt) - srw 2008-10-28 08:40:45 (152 views)
      - Re: Thanks, I've ordered a pair - donstevens 2008-12-10 22:10:08 (81 views)

4 GAUGE CONSOLE BUY. (pic) - ejonesie22 2008-10-21 15:49:58 (437 views)
- Re: 4 GAUGE CONSOLE BUY. - Hitmanx 2008-12-07 00:10:44 (71 views)
- Count me in as well! - ontop85 2008-11-27 15:18:56 (92 views)
  - The original design came from .... - johnhstein, 85-M6CSi, 85 745i 2008-12-04 07:21:31 (82 views)
  - Shipping to Norway is the easy part... - ejonesie22 2008-11-29 14:50:20 (83 views)
- Re: 4 GAUGE CONSOLE BUY. - matthewt 2008-11-26 17:55:06 (85 views)
- Re: 4 GAUGE CONSOLE BUY. - rcelect3 2008-10-21 18:10:03 (148 views)
- Unless its a Crazy Price, I'd be interested in 2 of them ;-) (nt) - wabiker 2008-10-21 17:03:37 (124 views)
  - Re: Unless its a Crazy Price, I'd be interested in 2 of them ;-) - Hitmanx 2008-10-21 17:50:24 (144 views)
    - I am shooting for about that, though I am not looking to make a profit - ejonesie22 2008-10-22 09:48:21 (165 views)
      - Re: I am shooting for about that, though I am not looking to make a profit - dinsmore 2008-11-01 18:39:36 (124 views)
        
        Please count me in as well (nt) - Jeff L. 2008-12-02 17:27:55 (86 views)

1984 733i for sale or parts - scfirefighter 2008-10-03 12:50:37 (324 views)
- SOLD - scfirefighter 2008-11-24 14:52:08 (65 views)
- Re: 1984 733i for sale or parts - sleis 2008-11-19 19:02:03 (81 views)
- Reduced Price for entire car - scfirefighter 2008-10-22 18:59:51 (110 views)
  - Re: Reduced Price for entire car - Hitmanx 2008-11-03 22:04:57 (78 views)
- Re: 1984 733i for sale or parts - zack01gc 2008-10-19 16:25:34 (102 views)
  - Re: 1984 733i for sale or parts - scfirefighter 2008-10-22 19:01:32 (96 views)
- Re: 1984 733i for sale or parts (pic) - scfirefighter 2008-10-12 21:34:07 (357 views)
  - air intake hose - nester 2008-10-28 04:24:54 (90 views)
- Re: 1984 733i for sale or parts (nt) - scfirefighter 2008-10-12 21:32:41 (127 views)
- Re: 1984 733i for sale or parts - rcelect3 2008-10-07 19:24:08 (134 views)
  - Re: 1984 733i for sale or parts - scfirefighter 2008-10-07 21:13:22 (126 views)
- Re: 1984 733i for sale or parts - Hitmanx 2008-10-05 12:40:44 (126 views)
- Re: 1984 733i for sale or parts - 06impreza 2008-10-03 14:20:40 (126 views)
  - Re: 1984 733i for sale or parts - scfirefighter 2008-10-03 15:35:50 (139 views)
    - Re: Clarification - scfirefighter 2008-10-04 19:01:48 (127 views)
    - Re: 1984 733i for sale or parts - 06impreza 2008-10-03 19:23:09 (117 views)
    - Re: 1984 733i for sale or parts - 06impreza 2008-10-03 19:20:28 (115 views)
      - Re: 1984 733i for sale or parts - scfirefighter 2008-10-03 21:20:16 (134 views)
        
        Re: 1984 733i for sale or parts - scfirefighter 2008-10-05 21:45:17 (132 views)
        Re: 1984 733i for sale or parts - 06impreza 2008-10-03 21:51:16 (133 views)

Few Reference Sensor Questions... - Hitmanx 2008-11-09 05:09:21 (219 views)
- Re: Few Reference Sensor Questions... (pic) (url) - Hitmanx 2008-11-17 20:16:49 (261 views)
  - PITA to fix no matter what approach you take - sfdon 2008-11-21 10:37:39 (142 views)
  - That looks like a 5-speed swap may be in the future - kff 2008-11-17 21:31:09 (132 views)
    - Re: That looks like a 5-speed swap may be in the future - Hitmanx 2008-11-18 13:30:37 (133 views)
      - Can't you get someone to weld the a new marker on in place? (nt) - Roy In GA 2008-11-18 23:41:55 (136 views)
        
        Re: Can't you get someone to weld the a new marker on in place? - Hitmanx 2008-11-20 12:40:56 (123 views)
- Re: Few Reference Sensor Questions... - Hitmanx 2008-11-17 16:38:24 (146 views)
- Re: Few Reference Sensor Questions... - Hitmanx 2008-11-10 00:50:50 (171 views)
  - Reference Sensor Positions and Connections - kff 2008-11-11 10:46:03 (206 views)
  - swap em and you will know.... - sfdon 2008-11-11 00:35:13 (148 views)
  - No need to jump the wires if you have battery voltage to the coil. (nt) - sfdon 2008-11-10 22:10:01 (143 views)
- What year is the car, is the OBC relay not allowing the - kff 2008-11-09 23:41:33 (176 views)
- Make very sure that the sensors are connected to the - sfdon 2008-11-09 10:24:03 (141 views)
  - Re: Make very sure that the sensors are connected to the - Hitmanx 2008-11-09 22:29:49 (145 views)
    - You should test between the black and yellow and the - sfdon 2008-11-10 00:20:06 (151 views)
    - Re: Make very sure that the sensors are connected to the (nt) - sfdon 2008-11-10 00:07:26 (145 views)

1984 745i Pricing Help - mls22611 2008-11-07 16:37:31 (199 views)
- It is all about condition... - sfdon 2008-11-07 19:49:50 (238 views)
  - But we all know you're cheap Don. (nt) - Bayou Bimmer 2008-11-19 16:52:32 (143 views)
  - Re: It is all about condition... - Hitmanx 2008-11-07 23:28:02 (154 views)
- you might start your search here... (url) - wabiker 2008-11-07 17:19:15 (180 views)

Engine oil temps? - Hitmanx 2008-11-07 01:22:01 (153 views)
- Re: Engine oil temps? - kff 2008-11-07 09:08:34 (158 views)
  - Re: Engine oil temps? - Hitmanx 2008-11-09 00:02:59 (157 views)
    - doesn't the turbo come with the oil cooler? - kff 2008-11-09 23:46:52 (136 views)
      - Re: doesn't the turbo come with the oil cooler? - Hitmanx 2008-11-10 00:44:54 (141 views)
        
        My 81 735i even has an oil cooler. (nt) - Roy In GA 2008-11-14 20:50:02 (127 views)
        
        Neither of my M30s has an oil cooler, one is US one Euro, both 85 (nt) - kff 2008-11-14 23:23:20 (140 views)
        
        Euro 735i have oil cooler up to 09/82 build I think (nt) - phathome 2008-11-15 13:04:10 (135 views)
        
        That may explain it, as many over here think the cooler - kff 2008-11-16 09:18:04 (125 views)

Sticky Starter - bvachon 2008-11-10 23:02:39 (162 views)
- Re: Sticky Starter - madeyes 2008-11-12 03:36:49 (120 views)

Any issues with taking out the AC compressor? - ericbruckbauer 2008-11-06 19:51:54 (146 views)
- If you do repair your A/C make sure you replace the - sfdon 2008-11-09 10:27:53 (140 views)
  - Re: If you do repair your A/C make sure you replace the - Hitmanx 2008-11-10 00:51:52 (140 views)
    - all 735i's built after 9/85 have the upgraded - sfdon 2008-11-10 11:00:04 (155 views)
- Re: Any issues with taking out the AC compressor? - Hitmanx 2008-11-06 21:47:22 (135 views)

Great parts car on EBAY!!! Many like new parts... (url) - ejonesie22 2008-10-13 17:37:52 (273 views)
- Re: Great parts car on EBAY!!! Many like new parts... - donstevens 2008-11-08 12:33:06 (99 views)
- ummm...I could use the light switch cap... ;-) - Vern 2008-10-18 02:03:30 (142 views)
  - I sure like the floor mats. (nt) - kff 2008-11-09 23:42:19 (115 views)
- So that's what they looked like when they were new... ! (nt) - DavidC 2008-10-15 02:56:12 (143 views)

starter (pic) - hec85735i 2008-10-21 15:14:47 (255 views)
- Re: starter - Hitmanx 2008-10-21 16:33:19 (144 views)
  - Re: starter - hec85735i 2008-11-07 15:47:36 (122 views)
  - Re: starter - ghw 2008-10-21 20:23:59 (144 views)
    - Re: starter - sfdon 2008-10-21 22:59:28 (153 views)
      - Re: starter - hec85735i 2008-11-07 15:49:31 (122 views)
        
        How long did it take to do? I may tackle it someday.NT (nt) - cpseapeacp 2008-11-09 08:53:05 (124 views)
        
        Re: How long did it take to do? I may tackle it someday.NT - hec85735i 2008-11-09 19:08:50 (103 views)
        Re: How long did it take to do? I may tackle it someday.NT - sfdon 2008-11-09 11:02:16 (121 views)

Temperature Sensor Readings - elbiera 2008-10-27 23:37:12 (178 views)
- Re: Temperature Sensor Readings - here are 2 of them - sfdon 2008-11-09 10:59:35 (140 views)
- Re: Temperature Sensor Readings - Hitmanx 2008-10-28 00:02:14 (160 views)

IGNITION SWITCH REPLACEMENT - zecrazysvierge 2008-11-08 00:49:56 (187 views)
- Re: IGNITION SWITCH REPLACEMENT - Hitmanx 2008-11-08 22:33:07 (167 views)
  - that grub screw should have a dab of paint on it.... (nt) - sfdon 2008-11-09 10:25:13 (134 views)

Turn signal switches? - Hitmanx 2008-11-07 06:36:08 (127 views)
- Re: Turn signal switches? - sfdon 2008-11-07 10:36:15 (134 views)
  - Re: Turn signal switches? - Hitmanx 2008-11-08 02:55:17 (125 views)

HELP WITH NO START - zecrazysvierge 2008-11-05 13:50:14 (166 views)
- Living in AZ myself, I know 1 summer is all it takes to Kill a - wabiker 2008-11-06 16:09:32 (176 views)
  - Re: Living in AZ myself, I know 1 summer is all it takes to Kill a - zecrazysvierge 2008-11-08 00:49:19 (121 views)

e60 bbs oem m5 wheels (pic) - ziv3r 2008-11-07 14:03:47 (283 views)

side marker lights - krz4bmrs 2008-11-07 13:37:40 (119 views)

Mystery Battery Drain - mark740i 2008-10-28 19:24:27 (212 views)
- something else to check... - Vern 2008-10-31 16:13:07 (183 views)
  - My trunk light switch on the e28 was short and left the light on. Hot bulb!! (nt) - Roy In GA 2008-10-31 17:37:43 (143 views)
- Re: Mystery Battery Drain - brkngmd 2008-10-31 06:23:35 (185 views)
  - Re: Mystery Battery Drain - brkngmd 2008-11-07 06:06:44 (144 views)
- try this... - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-10-29 11:38:27 (191 views)
- Re: Mystery Battery Drain - Hitmanx 2008-10-28 22:50:57 (166 views)
  - Re: Mystery Battery Drain - mark740i 2008-10-29 08:47:13 (185 views)
    - Re: Mystery Battery Drain - strobachyzoo 2008-10-29 12:09:20 (162 views)

car died on the road. (pic) - hec85735i 2008-11-05 20:25:57 (328 views)
- Questions for you... - sfdon 2008-11-06 00:33:59 (164 views)
  - Re: Questions for you... - hec85735i 2008-11-06 11:08:58 (153 views)
    - Re: Questions for you... - sfdon 2008-11-06 12:14:39 (167 views)
      - Re: Questions for you... - hec85735i 2008-11-06 12:31:27 (151 views)
- Re: car died on the road. - goms187 2008-11-05 20:48:17 (161 views)
  - Re: car died on the road. - hec85735i 2008-11-06 16:30:13 (130 views)

e23 B10 gearbox issues...solved! - mrb10 2008-11-03 06:49:04 (160 views)
- This is good news. Keeping the car the way it was delivered - kff 2008-11-03 10:17:48 (138 views)
  - The MT diagrams, well it was like this........... - mrb10 2008-11-04 05:13:35 (129 views)
    - I like to have access to all the information that one can - kff 2008-11-04 09:58:36 (115 views)
      - same here! - mrb10 2008-11-04 11:17:57 (95 views)
        
        thats great news ag (nt) - BMW1066 2008-11-05 17:47:19 (112 views)

Hello from Sema. Sale on 2009 Model Kaixen H4 HID Xenon Kits this week! (url) - Draleu 2008-11-05 15:26:15 (170 views)

LEFT SIDE SAGS WITH A FULL TANK OF GAS - cpseapeacp 2008-10-23 13:09:05 (188 views)
- Check your diff mount. A 1985 Euro M6 mount is the best replacement - Vern 2008-10-24 11:11:31 (196 views)
  - Is the M6 replacement strong than the steock e23 mount , as well as cheaper?NT (nt) - cpseapeacp 2008-11-05 13:08:03 (123 views)
  - Re: Check your diff mount. A 1985 Euro M6 mount is the best replacement - Hitmanx 2008-10-30 02:36:27 (139 views)
    - Price is one biggy... about half the cost. (nt) - wabiker 2008-11-04 16:35:04 (128 views)
      - Re: Price is one biggy... about half the cost. - Hitmanx 2008-11-04 17:16:06 (132 views)
        
        Thread pitch is the same as the old one, looks like 1.5 (nt) - wabiker 2008-11-04 20:08:18 (123 views)
        
        Re: Thread pitch is the same as the old one, looks like 1.5 - Hitmanx 2008-11-04 21:04:36 (117 views)
  - Just did the Diff Mount swap... 19 x 60mm bolt. (nt) - wabiker 2008-10-25 14:36:51 (165 views)
- You are about halfway there.... - ejonesie22 2008-10-24 09:16:13 (201 views)
- Just a guess.... Sub-Mount Bushings ?? (nt) - wabiker 2008-10-23 15:06:46 (145 views)
  - check your springs.. - sfdon 2008-10-24 14:05:37 (152 views)

745i to part out - 635turbo 2008-11-03 17:51:31 (146 views)
- LOCATION ??? - ///ARINUTS... 2008-11-04 11:03:43 (99 views)
- Re: 745i to part out - jj 2008-11-04 08:24:11 (119 views)
- Re: 745i to part out - 58isetta 2008-11-03 18:25:30 (124 views)

cruise control (nt) - unvago 2008-11-02 20:04:25 (149 views)
- Re: cruise control - unvago 2008-11-02 20:07:02 (155 views)
  - The cable should have some slack in it about 1/8th inch - kff 2008-11-03 10:21:29 (94 views)

PS hoses - clemsoncpa08 2008-11-02 18:34:53 (141 views)
- If these are BMW hoses get them replaced under warranty - kff 2008-11-03 10:19:59 (99 views)
- Rebuilt hoses get my vote too. (nt) - wabiker 2008-11-02 22:14:47 (122 views)
- Re: PS hoses - Hitmanx 2008-11-02 19:18:43 (113 views)
- No, they are only pressure switches. There are many hydraulic - Roy In GA 2008-11-02 18:53:21 (114 views)

Sytner BMW needs an E23 for launch of F01 - sytnerbmw 2008-09-30 12:45:30 (222 views)
- e23 - mrb10 2008-10-01 03:09:57 (88 views)
- Re: Sytner BMW needs an E23 for launch of F01 - BigBruce 2008-09-30 22:12:17 (122 views)
- Re: Sytner BMW needs an E23 for launch of F01 - BMW1066 2008-09-30 16:57:48 (128 views)
- What the heck is an F01 anyway? (nt) - phathome 2008-09-30 15:04:31 (118 views)
- How about a Sytner built B10 Alpina E23? - phathome 2008-09-30 14:55:56 (149 views)
  - Philip, search for FO1 on the e38 board. Had some pics recently. (nt) - Roy In GA 2008-09-30 23:50:35 (176 views)
    - FO1 info here. its the new 7 series apparently (url) - philipuk 2008-10-01 03:24:00 (438 views)
      - all sorted now, a few cars on their way later this month - mrb10 2008-11-03 06:52:00 (67 views)
        
        Nice job AG, supplying nice E23s for the F01 launch. - kff 2008-11-03 10:15:03 (66 views)

temp gauge - goms187 2008-10-11 17:05:34 (155 views)
- update - goms187 2008-10-29 22:05:01 (98 views)
  - Re: update - hartac54 2008-10-30 22:09:21 (91 views)
    - Re: update - goms187 2008-10-31 00:57:58 (82 views)
      - Why not just bypass the si board? (pic) - demet 2008-10-31 09:11:42 (155 views)
        
        Thanks guys - goms187 2008-11-02 19:29:44 (80 views)
        Re: Why not just bypass the si board? - goms187 2008-10-31 09:41:35 (70 views)
- Anyone out there have an extra temp/gas gauge board - goms187 2008-10-13 18:28:31 (108 views)
  - Re: Anyone out there have an extra temp/gas gauge board - hartac54 2008-10-19 20:59:38 (87 views)
- Re: temp gauge - clemsoncpa08 2008-10-11 19:46:02 (126 views)
  - Re: temp gauge - goms187 2008-10-11 20:23:02 (120 views)

Anybody removed the steering box? - clemsoncpa08 2008-10-20 18:13:13 (137 views)
- Not a big deal- 3 bolts and the ball join then - sfdon 2008-11-01 03:19:50 (133 views)

Pulling to right side - clemsoncpa08 2008-10-28 18:22:03 (154 views)
- Re: Pulling to right side - hartac54 2008-10-29 18:09:27 (135 views)
  - I agree with the tire size issue... - Vern 2008-10-31 11:02:12 (121 views)
  - thanx (nt) - clemsoncpa08 2008-10-30 19:25:14 (125 views)

Getrag 265 input shaft bearing # ??? - strobachyzoo 2008-10-29 22:24:56 (150 views)
- Wrong tranny... that is a Getrag 260 part # - sfdon 2008-10-30 20:17:25 (134 views)
  - Re: Wrong tranny... that is a Getrag 260 part # - strobachyzoo 2008-10-31 01:20:06 (141 views)

REPLACING STARTER - zecrazysvierge 2008-10-27 13:57:31 (154 views)
- Re: REPLACING STARTER - clemsoncpa08 2008-10-28 18:12:48 (164 views)
  - Re: REPLACING STARTER - zecrazysvierge 2008-10-28 18:17:26 (152 views)
    - Re: REPLACING STARTER - clemsoncpa08 2008-10-28 18:34:38 (165 views)

Pulling to right side - clemsoncpa08 2008-10-28 18:20:22 (119 views)

1984 745i turbo parting out - 635turbo 2008-10-26 15:51:56 (191 views)
- Re: 1984 745i turbo parting out - jj 2008-10-28 13:06:27 (139 views)
- I'll take the knock box (nt) - Vern 2008-10-28 00:32:13 (125 views)
- Re: 1984 745i turbo parting out - zack01gc 2008-10-27 15:16:54 (138 views)
- Re: 1984 745i turbo parting out - Hitmanx 2008-10-26 19:01:36 (137 views)

Batt to Fuse Block main power/bus cable? - Hitmanx 2008-10-28 03:22:05 (122 views)

HVAC - unvago 2008-10-18 13:32:04 (174 views)
- Re: HVAC - kff 2008-10-25 15:13:18 (139 views)

four gauge console - rcelect3 2008-10-15 18:17:48 (244 views)
- Re: four gauge console - brkngmd 2008-10-23 17:21:31 (111 views)
  - Re: four gauge console - Hitmanx 2008-10-23 17:24:59 (100 views)
- Re: four gauge console - Hitmanx 2008-10-15 22:42:41 (161 views)
  - one more small 745i sepcific issue... - James '84 745i 2008-10-21 22:32:28 (146 views)
  - Can you send me the cad. - ejonesie22 2008-10-17 08:49:06 (143 views)
    - i would be interested (nt) - goms187 2008-10-17 20:15:03 (113 views)
    - Re: Can you send me the cad. - rcelect3 2008-10-17 18:49:52 (131 views)
    - Re: Can you send me the cad. - Hitmanx 2008-10-17 16:10:41 (134 views)
      - Is this happening? - goms187 2008-10-20 23:48:59 (138 views)
        
        Re: Is this happening? - Hitmanx 2008-10-21 01:58:34 (129 views)
        
        Nope - goms187 2008-10-22 00:11:24 (132 views)
        I have the drawings and am taking them today. (nt) - ejonesie22 2008-10-21 15:39:22 (109 views)
- That is a long dead special offer by one of the folks - kff 2008-10-15 18:20:49 (149 views)
  - Re: That is a long dead special offer by one of the folks - vance 2008-10-24 21:47:51 (114 views)
  - Re: That is a long dead special offer by one of the folks - rcelect3 2008-10-15 18:26:25 (128 views)

Brakes locking up by themselves on 535is - Kevin E '86 735i 5-Spd Conversion 2008-10-21 15:07:06 (137 views)
- Re: Brakes locking up by themselves on 535is - sfdon 2008-10-24 12:12:22 (129 views)
  - Re: Brakes locking up by themselves on 535is - Kevin E '86 735i 5-Spd Conversion 2008-10-24 13:37:17 (122 views)
    - Re: Brakes locking up by themselves on 535is - sfdon 2008-10-24 13:57:37 (134 views)

SPEEDO REPLACEMENT - jeffer 2008-10-21 00:01:31 (127 views)
- Re: SPEEDO REPLACEMENT - cpseapeacp 2008-10-23 13:46:26 (130 views)
- Never heard of an 85 MPH speedo. (nt) - Roy In GA 2008-10-22 13:10:02 (117 views)
- What is year and model of your car? (nt) - Roy In GA 2008-10-21 11:53:05 (125 views)
  - Re: What is year and model of your car? - jeffer 2008-10-22 01:12:26 (126 views)
    - ETK says the P/N is the same for e23s of 82 and later and e24s of 83 and later. - Roy In GA 2008-10-22 13:08:44 (135 views)

Speedo doesn't work... No signal from rear dif? - zack01gc 2008-10-20 21:20:19 (146 views)
- Re: Speedo doesn't work... No signal from rear dif? - Hitmanx 2008-10-20 23:07:44 (137 views)
  - Re: Speedo doesn't work... No signal from rear dif? - zack01gc 2008-10-21 02:59:41 (112 views)
  - Bad SI board, corroded batteries. The rear sensor rarely goes bad. (nt) - Roy In GA 2008-10-20 23:18:49 (145 views)
    - Re: Bad SI board, corroded batteries. The rear sensor rarely goes bad. - zack01gc 2008-10-21 03:00:43 (128 views)
      - Re: Bad SI board, corroded batteries. The rear sensor rarely goes bad. - bzalto 2008-10-22 07:57:42 (146 views)
        
        Re: Bad SI board, corroded batteries. The rear sensor rarely goes bad. - zack01gc 2008-10-22 16:24:14 (125 views)
      - Link. (url) - Roy In GA 2008-10-21 11:51:49 (158 views)

Car died while driving - 06impreza 2008-10-12 20:36:59 (246 views)
- I've said it before, I'll say it again... - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-10-20 11:47:56 (196 views)
  - Re: I've said it before, I'll say it again... - bzalto 2008-10-22 08:20:03 (136 views)
    - yes,....... more - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-10-22 12:10:40 (151 views)
- It runs again! - 06impreza 2008-10-18 20:37:03 (196 views)
  - FANTASTIC news!!! Bravo!!! - phathome 2008-10-19 14:16:28 (129 views)
    - Re: FANTASTIC news!!! Bravo!!! - 06impreza 2008-10-19 15:58:42 (118 views)
- Updates - 06impreza 2008-10-14 15:26:14 (156 views)
  - The position sensors will keep a car from starting and - kff 2008-10-14 20:01:24 (170 views)
    - Ordered two new sensors.. Hopefully that's the fix.. (nt) - 06impreza 2008-10-14 21:29:37 (135 views)
      - list on those is 107 bucks apiece... - sfdon 2008-10-15 11:25:59 (125 views)
        
        but you can buy them for 53 each and they are CRITICAL - kff 2008-10-15 15:25:34 (151 views)
        
        They are critical.... - sfdon 2008-10-15 15:33:06 (143 views)
        
        yup test em to se if they are good and get a set while - kff 2008-10-15 18:19:21 (116 views)
        
        yuo can test 'em today... and - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-10-22 12:14:09 (141 views)
        
        Got both shipped 2nd day for $119 (nt) - 06impreza 2008-10-15 12:39:08 (127 views)
- Mystery car? - sfdon 2008-10-13 14:17:35 (137 views)
  - Sorry 1984 733i (nt) - 06impreza 2008-10-13 15:55:44 (130 views)
- Re: Car died while driving - goms187 2008-10-12 22:54:00 (142 views)
- Main relay? (nt) - alan(735 work in progress) 2008-10-12 21:53:48 (130 views)
  - Changed within 2 months (nt) - 06impreza 2008-10-12 21:56:06 (119 views)
- Clarify... - Area52 2008-10-12 20:54:52 (119 views)
  - Re: Clarify... - 06impreza 2008-10-12 22:01:53 (152 views)
    - Re: Clarify... - sfdon 2008-10-14 11:52:57 (155 views)

Leatherique v Colorplus - Hitmanx 2008-10-19 02:31:25 (158 views)
- Re: Leatherique v Colorplus (pic) - HC 2008-10-20 12:58:46 (287 views)
- Im currently trying the Colorplus - wabiker 2008-10-20 11:28:54 (152 views)
- I've used the Leatherique stuff several times with good results. (url) - DavidC 2008-10-19 02:36:55 (191 views)
  - Re: I've used the Leatherique stuff several times with good results. - Hitmanx 2008-10-19 03:43:34 (130 views)
    - is it safe for use on buffalow? - BMW1066 2008-10-20 19:02:05 (145 views)
      - Leatherique told me they product IS safe to use on Buffalo. (nt) - wabiker 2008-10-20 20:36:24 (114 views)
        
        Cool, Thanks (nt) - BMW1066 2008-10-21 11:26:17 (136 views)

Unreliable '84 733i - bzalto 2008-10-18 09:33:25 (181 views)
- Make it reliable... - ejonesie22 2008-10-20 10:05:31 (156 views)
- Re: Unreliable '84 733i - Hitmanx 2008-10-18 19:52:18 (166 views)
  - Re: Unreliable '84 733i - bzalto 2008-10-18 23:42:51 (147 views)
    - Re: Unreliable '84 733i - Hitmanx 2008-10-19 00:45:44 (169 views)

starts, when cold, Cranks, and no start when hot - brkngmd 2008-10-05 02:29:22 (262 views)
- Re: starts, when cold, Cranks, and no start when hot - Hitmanx 2008-10-05 13:01:06 (128 views)
  - Re: starts, when cold, Cranks, and no start when hot - brkngmd 2008-10-05 18:46:39 (135 views)
    - Re: starts, when cold, Cranks, and no start when hot - Hitmanx 2008-10-05 20:43:11 (116 views)
      - Re: starts, when cold, Cranks, and no start when hot - brkngmd 2008-10-11 18:55:55 (133 views)
        
        Re: starts, when cold, Cranks, and no start when hot - Hitmanx 2008-10-12 00:29:31 (122 views)
        
        Re: starts, when cold, Cranks, and no start when hot - brkngmd 2008-10-12 21:03:14 (112 views)
        
        update Re: starts, when cold, Cranks, and no start when hot - brkngmd 2008-10-18 15:47:06 (109 views)
        
        update Re: starts, when cold, Cranks, and no start when hot - Hitmanx 2008-10-18 17:10:52 (105 views)

VIN decoder for options? - Hitmanx 2008-10-16 03:51:04 (155 views)
- I have not seen the BMW decoder on the web that does this - kff 2008-10-16 10:47:39 (156 views)
  - Are you going to get the Agate Green/ Nutria car? (nt) - Roy In GA 2008-10-18 12:18:51 (138 views)
    - Re: Are you going to get the Agate Green/ Nutria car? - Hitmanx 2008-10-18 17:10:32 (120 views)

1985 735 surging problem - paluck 2008-10-06 01:50:52 (201 views)
- AFM repair info courtesy of the big coupe group - philipuk 2008-10-14 07:44:58 (259 views)
- solved my issue - paluck 2008-10-11 22:05:18 (180 views)
  - Re: solved my issue - elbiera 2008-10-15 11:43:04 (125 views)
    - it is the connector on the firewall side of part number 4 - kff 2008-10-16 22:04:37 (139 views)
- clarify - more of a miss or stumble - paluck 2008-10-06 10:06:21 (145 views)

some pics of my car - 06impreza 2008-10-07 23:25:01 (378 views)
- Re: some pics of your car (pic) - goms187 2008-10-11 19:07:37 (367 views)
  - Re: some pics of your car - 06impreza 2008-10-11 23:27:16 (119 views)
- Re: some pics of my car (pic) - hec85735i 2008-10-08 12:53:52 (290 views)
  - Thanks - 06impreza 2008-10-08 14:22:00 (109 views)
- Re: some pics of my car - 944s 2008-10-08 10:43:13 (114 views)
  - Re: some pics of my car - 06impreza 2008-10-08 12:41:21 (108 views)
- what kind of springs do you have? - ((((BIGANT)))) 2008-10-08 06:02:45 (139 views)
  - Re: what kind of springs do you have? - 06impreza 2008-10-08 12:39:54 (139 views)
    - Re: what kind of springs do you have? - zack01gc 2008-10-13 14:59:03 (95 views)
      - Re: what kind of springs do you have? - 06impreza 2008-10-13 15:54:06 (102 views)
        
        Re: what kind of springs do you have? - 944s 2008-10-16 13:58:51 (96 views)
        
        Re: what kind of springs do you have? - 06impreza 2008-10-16 19:02:16 (86 views)
        what about cutting the spring???? anyone try that??? (nt) - 944s 2008-10-16 14:00:09 (96 views)
        
        It's harder and not as safe - 06impreza 2008-10-16 17:08:41 (90 views)
        
        Re: what kind of springs do you have? - zack01gc 2008-10-14 12:11:26 (93 views)

No Oil Pressure??? - rcelect3 2008-10-12 11:03:43 (131 views)
- Chances it is the OP switch, at least 90 maybe more - kff 2008-10-12 12:27:21 (126 views)
  - Re: Chances it is the OP switch, at least 90 maybe more - rcelect3 2008-10-13 20:16:36 (114 views)
    - Glad you got it fixed. It doesn't get any better than swapping a - kff 2008-10-13 22:15:30 (110 views)

odometer stopped working - 06impreza 2008-10-01 16:14:36 (125 views)
- Started working again today - 06impreza 2008-10-03 22:39:39 (109 views)
  - it's like old age... - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-10-13 07:14:38 (92 views)
  - As you lose a gear tooth, you will have times when the - kff 2008-10-04 00:19:32 (100 views)
- Re: odometer stopped working - Hitmanx 2008-10-02 17:26:34 (122 views)
- Speedo gears ... a word to ALL... (url) - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-10-02 07:02:57 (182 views)
  - Ditto for me, odometergears.com is the source, get the WHOLE set., count teeth.. - ejonesie22 2008-10-03 09:18:26 (106 views)
    - Re: Ditto for me, odometergears.com is the source, get the WHOLE set., count tee - 06impreza 2008-10-03 12:39:11 (116 views)
      - There are three in the set, he sells them as a set. (nt) - ejonesie22 2008-10-03 14:55:25 (109 views)
  - Re: Speedo gears ... a word to ALL... - 06impreza 2008-10-02 12:58:12 (106 views)
  - I can second that.. (nt) - jj 2008-10-02 08:53:10 (103 views)
- You can pull out the gauge cluster and - kff 2008-10-01 19:28:29 (135 views)

Calling On Electric Gurus – Ignition/Relay/Audio (pic) (url) - Oka 2008-10-01 17:28:08 (239 views)
- Oka, what type and how old is the amp? (nt) - chad20 2008-10-10 19:44:21 (98 views)
  - Re: Oka, what type and how old is the amp? - Oka 2008-10-12 12:44:49 (95 views)
    - Chad, The Amp. Should Be About Three Years Old. (nt) - Oka 2008-10-12 12:48:45 (94 views)
- Is The 'E23 ignition is connected to any relay'? If Yes, Which One? (nt) - Oka 2008-10-01 23:44:24 (130 views)
  - More Information (pic) - Oka 2008-10-04 14:58:29 (197 views)
    - How did it work out? (nt) - cambridge 2008-10-10 12:36:55 (94 views)
    - Re: More Information - cambridge 2008-10-04 19:49:28 (183 views)
- Isolate the amp from the head unit and tes - cambridge 2008-10-01 21:09:29 (102 views)
- Speaking from a Stereo System background, (pic) (url) - kff 2008-10-01 19:46:50 (188 views)

O2 sensor - anyone have a spare? - paluck 2008-10-11 22:01:48 (124 views)
- Re: O2 sensor - anyone have a spare? - 06impreza 2008-10-11 23:23:58 (97 views)

Bad Compression - clemsoncpa08 2008-10-09 20:06:06 (119 views)
- Re: Bad Compression - Hitmanx 2008-10-10 20:14:57 (107 views)
- Does the car drive ok? if so just drive it. (nt) - kff 2008-10-10 17:20:10 (106 views)
  - My mistake, I forgot to open the throttle - clemsoncpa08 2008-10-10 17:31:58 (116 views)

Cheap topend kit on ebay! - Hitmanx 2008-10-09 23:42:20 (158 views)

wont turn over - kgb 2008-10-07 20:48:13 (145 views)
- Re: wont turn over - clemsoncpa08 2008-10-08 16:22:08 (135 views)
  - Re: wont turn over - 06impreza 2008-10-08 22:39:31 (119 views)
    - Brown is the standard for ground in BMWs. (nt) - kff 2008-10-09 17:02:59 (102 views)

E23 euro bumper and lights - euroe23 2008-10-08 13:46:23 (163 views)

blower motor - kgb 2008-10-07 21:06:04 (135 views)
- The blower motor comes out the front behind the firewall under the - Roy In GA 2008-10-07 23:35:35 (135 views)

Cluster replacement from a 5 series - Kevin E '86 735i 5-Spd Conversion 2008-10-03 16:19:44 (158 views)
- Did you change the coding plug on the back of the tach - kff 2008-10-03 18:58:01 (133 views)
  - Two potential problems: (pic) - stevebu 2008-10-03 22:26:21 (233 views)
    - Re: Two potential problems: - Kevin E '86 735i 5-Spd Conversion 2008-10-06 14:30:48 (110 views)
    - Re: Two potential problems: - kff 2008-10-04 00:21:03 (110 views)

Custom Exhaust question - clemsoncpa08 2008-10-05 12:47:31 (172 views)
- Here you go (url) - ejonesie22 2008-10-06 08:53:04 (186 views)
- Re: Custom Exhaust question - 06impreza 2008-10-05 12:56:22 (155 views)
  - Re: Custom Exhaust question - Hitmanx 2008-10-06 14:20:21 (127 views)

upgrade rims - mynizzel 2008-10-04 20:04:19 (133 views)
- I need spacers for my 16's so I dunno... (nt) - wabiker 2008-10-04 21:31:32 (116 views)
  - Re: I need spacers for my 16's so I dunno... - 06impreza 2008-10-05 03:28:38 (117 views)
  - Re: I need spacers for my 16's so I dunno... - 06impreza 2008-10-05 03:28:31 (103 views)
- Nothing, put wheels on and drive (nt) - 06impreza 2008-10-04 20:24:23 (106 views)

1985 735i Euro FS (pic) (url) - tagtron 2008-10-04 20:05:31 (329 views)

Visit the BimmerBoard Store on Amazon.com!

Vacuum hose connected to the breather hose - clemsoncpa08 2008-10-03 18:52:23 (118 views)
- Found it! - clemsoncpa08 2008-10-03 19:59:58 (99 views)

A few brake torque questions... - Hitmanx 2008-09-28 22:34:34 (126 views)
- Re: A few brake torque questions... - Hitmanx 2008-10-02 17:22:22 (111 views)
- Re: A few brake torque questions... - kff 2008-09-29 18:26:45 (112 views)
- Re: A few brake torque questions... - kff 2008-09-28 23:31:58 (128 views)
  - Re: A few brake torque questions... - Hitmanx 2008-09-29 11:30:04 (121 views)
    - Eric, to load software, you can't go above - Vern 2008-09-29 18:26:27 (116 views)
      - Re: Eric, to load software, you can't go above - Hitmanx 2008-09-29 21:11:22 (109 views)

Starting Issues - my735 2008-09-30 08:58:08 (130 views)
- Need alittle more info: - stevebu 2008-09-30 15:16:38 (101 views)
  - Re: Need alittle more info: - my735 2008-09-30 20:06:57 (107 views)
    - I would look towards the tune up stuff- - stevebu 2008-10-01 08:44:14 (112 views)
      - Also, switch over to the e32 board for more info. (nt) - stevebu 2008-10-01 08:45:23 (102 views)
- Howdy, welcome to the Board..! (nt) - wabiker 2008-09-30 15:14:30 (105 views)
  - Re: Howdy, welcome to the Board..! - my735 2008-09-30 20:09:39 (101 views)
  - Oops..lesson #1.... there is no edit function, so be careful hitting the (url) - wabiker 2008-09-30 15:22:58 (108 views)
    - Re: Oops..lesson #1.... there is no edit function, so be careful hitting the - my735 2008-09-30 20:13:44 (101 views)
      - Yah me too... I miss driving Le Beast, but 9-10 mpg was killing me - wabiker 2008-09-30 21:14:17 (98 views)

anyone going to bmfeast in Flanders, NJ - 06impreza 2008-09-28 14:41:29 (98 views)
- do you have a link for info? (nt) - goms187 2008-09-28 16:50:14 (96 views)
  - Re: do you have a link for info? - 06impreza 2008-09-28 17:34:08 (95 views)
    - shoot me an email if you wanna meet up for the drive (nt) - goms187 2008-09-29 20:04:23 (93 views)
      - Email sent - 06impreza 2008-09-30 01:11:19 (81 views)

Oktoberfest Pics (pic) - goms187 2008-09-28 17:12:32 (310 views)
- Very Nice car! (nt) - ((((BIGANT)))) 2008-09-28 21:54:03 (93 views)

Lots of brochures and pictures of these cars. (url) - kff 2008-09-27 18:43:33 (177 views)

how to disable open door chime? - 06impreza 2008-09-27 16:54:09 (95 views)
- It is located under the grille in the top of the dash - kff 2008-09-27 18:40:30 (120 views)

buzzing from center of dash - 06impreza 2008-09-25 23:20:59 (107 views)
- If it is down low it could be the controller for the HVAC - kff 2008-09-26 00:18:17 (113 views)
  - Keith is right, the controller does make a chattering sound - chad20 2008-09-26 17:52:07 (101 views)
    - Re: Keith is right, the controller does make a chattering sound - 06impreza 2008-09-26 19:01:13 (96 views)
      - Pull the dash top grille then - kff 2008-09-27 10:17:18 (102 views)
        
        Unhooked, thanks! (nt) - 06impreza 2008-09-27 16:51:57 (123 views)
- Could be the buzzer mounted in the center vent. Could be Chris Bangle. (nt) - chad20 2008-09-25 23:37:44 (96 views)
  - Re: Could be the buzzer mounted in the center vent. Could be Chris Bangle. - 06impreza 2008-09-26 03:46:45 (93 views)

Which Guibo... (url) - wabiker 2008-09-25 15:36:59 (116 views)
- I think that's it for a manual trans. (nt) - Roy In GA 2008-09-25 23:37:37 (93 views)
- Re: Which Guibo... - ghw 2008-09-25 20:55:54 (92 views)

Rear Springs, '84 733i - zack01gc 2008-09-23 23:14:17 (139 views)
- you pay the shipping and.. - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-09-24 10:14:16 (98 views)
  - Re: you pay the shipping and.. - zack01gc 2008-09-24 19:36:26 (100 views)
- Try a couple sources - kff 2008-09-24 07:56:56 (103 views)
- Unfortunately, this is pretty common on these cars. The factory - chad20 2008-09-23 23:44:31 (129 views)
  - Re: Unfortunately, this is pretty common on these cars. The factory - zack01gc 2008-09-24 01:09:23 (112 views)
    - Well there you go, John to the rescue! (nt) - chad20 2008-09-24 11:20:38 (92 views)

Anyone have a spare coil wire? - chad20 2008-09-23 23:30:35 (91 views)
- I will in the next day or two... (nt) - ejonesie22 2008-09-24 11:39:59 (89 views)
  - Do you still want the ecu Evan? If so email me your shipping address. (nt) - chad20 2008-09-24 13:53:18 (85 views)

The final (?) chapter in the 733 running like crap saga (lessons learned) - ejonesie22 2008-09-22 11:55:37 (198 views)
- So do you still need the ecu Evan? (nt) - chad20 2008-09-23 23:25:58 (83 views)
  - Yeah, I still would like to have an extra... - ejonesie22 2008-09-24 11:41:15 (80 views)
- Bravo Evan, fantastic example of persevance and doggedness - phathome 2008-09-22 13:08:31 (100 views)
  - Re: Bravo Evan, fantastic example of persevance and doggedness - vance 2008-09-22 15:31:43 (118 views)
    - Well if my head had remained stuck up my.... - ejonesie22 2008-09-22 15:54:23 (79 views)
  - and pig headeness and conciet and stupidity.... - ejonesie22 2008-09-22 13:20:29 (101 views)
  - D'oh! Make that perseverance - heck you know what I mean (nt) - phathome 2008-09-22 13:09:35 (84 views)

Motronic transistor repair - 944s 2008-09-22 15:32:49 (151 views)
- have you checked or replaced ...? - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-09-23 15:14:04 (140 views)
- The only way to diganose that particular issue is taking the ECU out - ejonesie22 2008-09-22 16:12:46 (135 views)
  - Re: The only way to diganose that particular issue is taking the ECU out - 944s 2008-09-22 16:49:20 (129 views)
    - I like stock on these cars mainly for the motoronic box. - ejonesie22 2008-09-22 17:19:17 (122 views)

Speaking of ECM's can anyone decipher mine? - wabiker 2008-09-22 19:18:22 (111 views)
- It's a pre 82 OBC box. (url) - Roy In GA 2008-09-23 00:10:51 (108 views)
  - ...DOH...Im a Maroooon... I was looking at the Other number. thx Roy - wabiker 2008-09-23 10:52:21 (91 views)

Power steering banjo bolts - clemsoncpa08 2008-09-22 23:09:12 (105 views)
- Did you use new crush washer gasket rings? (nt) - Roy In GA 2008-09-23 00:14:32 (89 views)
  - Re: Did you use new crush washer gasket rings? - clemsoncpa08 2008-09-23 07:49:42 (100 views)
    - Like items 9/13/23 in the link. (url) - Roy In GA 2008-09-23 09:59:23 (91 views)

Trunk Rubber Seal... lessons learned... - wabiker 2008-09-21 18:13:21 (152 views)
- Excellent post Mr Biker, got pics of the old and new seals? - phathome 2008-09-22 13:11:25 (88 views)
  - Yeppers, I was getting a small amout of leakage... - wabiker 2008-09-22 14:26:35 (104 views)

differential question... - jj 2008-09-21 13:36:16 (101 views)
- YES (nt) - ((((BIGANT)))) 2008-09-21 22:48:06 (82 views)

Dependable 3 series for sale??? - dgoodwin 2008-09-21 21:47:43 (80 views)