The Navigation A/V Forum

Sign in to your BimmerBoard Account

BimmerBoard Official Time is 06:12:11 AM EST, Saturday, November 07, 2009. Support this community with a monetary donation today.

Visit the New IBUS Forum

Pages: 1 2 3 4 5 6 7 8 9 10 - Next >>

Post New Message

sticky: UPDATE MON 10/26 - Dr. Sam Cecil, father to BimmerBoard founder David Cecil (pic) - M.Wong 2009-10-27 01:20:04 (742 views)
- sticky: From David: SAT 10/31 - Dear BimmerBoard friends, thank you. - M.Wong 2009-10-31 23:50:26 (146 views)

sticky: BimmerBoard Vinyl Stickers. Taking Orders. $3 each mailed. Only 100 available. (pic) (url) - DavidC 2009-09-20 04:54:38 (1525 views)

sticky: Craftsman powder coating systems (pic) (url) - DavidC 2009-05-02 04:18:55 (5263 views)

sticky: How to add a photo to your signature. (url) - DavidC 2009-04-07 01:21:03 (2820 views)

sticky: How to upload and insert photos into messages (pic) (url) - DavidC 2009-02-15 10:02:42 (4162 views)

sticky: Complete BMW Navigation retrofit instructions in .pdf here: (url) - Dragnet 2006-02-06 00:29:12 (24677 views)

Nav unit part numbers! - kurtnut 2009-10-29 12:43:28 (48 views)
- None of these numbers are nav numbers!!! They are wide screen display numbers - Roy In GA 2009-10-29 21:26:52 (28 views)
  - Roy, good you noticed that (nt) - mouser 2009-10-30 00:13:19 (18 views)
- Just the other day I saw a post where someone asked basically the same - mouser 2009-10-29 15:33:28 (18 views)
  - I found it, it was on this same page just down near the bottom but (url) - mouser 2009-10-29 15:37:54 (19 views)
    - It's the widescreen head unit, - kurtnut 2009-10-30 04:27:44 (21 views)
      - The display is just that. Has nothing to do with the audio and speakers. You - Roy In GA 2009-10-30 17:53:50 (15 views)
        
        Could be the radio unit, Brian any advice? - kurtnut 2009-11-04 06:04:24 (10 views)
        
        The first thing we need to do is figure out which audio system version you have - Brian 2009-11-04 08:27:37 (12 views)
        
        Re: The first thing we need to do is figure out which audio system version you have - kurtnut 2009-11-07 05:38:49 (2 views)

MKIV plug and play unit - johndddd 2009-11-06 16:42:10 (20 views)
- Do you have a picture of what you got? - Brian 2009-11-06 17:11:52 (4 views)
  - Re: Do you have a picture of what you got? - johndddd 2009-11-06 17:19:40 (24 views)
    - Re: Do you have a picture of what you got? (pic) - johndddd 2009-11-06 17:39:44 (18 views)
      - Amazong, I did not know that the DVD reader was available by itself - Brian 2009-11-06 19:39:33 (6 views)
        
        Re: Amazong, I did not know that the DVD reader was available by itself - johndddd 2009-11-06 19:52:11 (6 views)
        
        Also watch the for sales here. (url) - Roy In GA 2009-11-07 00:10:20 (5 views)
        Cheaper for a MKIV on ebay. The TIS does show how to do the DVD mechanism. That - Roy In GA 2009-11-07 00:07:47 (4 views)

Looking for Installer - jrney357 2009-10-31 19:37:50 (48 views)
- Do you have the old MKII system installed? If so it is easy to install the new - Roy In GA 2009-11-01 01:40:46 (31 views)
  - Re: Do you have the old MKII system installed? If so it is easy to install the new - jrney357 2009-11-04 13:26:34 (11 views)
    - Left side of trunk above the CD player. Do you have the small screen - Roy In GA 2009-11-07 00:02:44 (0 views)
  - Re: Do you have the old MKII system installed? If so it is easy to install the new - jrney357 2009-11-01 14:46:00 (21 views)

MKIV - johndddd 2009-10-31 04:17:56 (35 views)
- Re: MKIV - johndddd 2009-11-06 16:38:45 (3 views)
- Re: MKIV - johndddd 2009-10-31 07:20:29 (20 views)
  - MKIVs also use CD maps. (nt) - Roy In GA 2009-10-31 12:45:36 (19 views)
    - Re: MKIVs also use CD maps. - johndddd 2009-10-31 16:33:29 (16 views)
- Accept screen = US-market - kiwijochen 2009-10-31 04:55:50 (27 views)
  - My Accept screen goes off all by itself after 8 seconds. My MK4 - mouser 2009-11-01 00:34:41 (18 views)
    - Yes I think that was one of the fixes. (nt) - Roy In GA 2009-11-01 01:34:16 (11 views)

what is the power output of our DSP (nt) - paprmkr 2009-10-31 16:41:39 (18 views)
- DSP Amp is a 12-channel amplifier - kiwijochen 2009-11-02 16:12:29 (15 views)
  - Or was it 14-channel? - kiwijochen 2009-11-02 16:13:05 (17 views)
    - It is 14 channel with a mix of 15W and 30W channel amps (url) - Brian 2009-11-02 17:08:55 (16 views)
- Brian listed it in a post a short time ago. I think he said about 330 or so. (nt) - Roy In GA 2009-11-01 01:36:33 (13 views)
  - if 4Ch amp then about 75w per channel - paprmkr 2009-11-01 13:28:55 (12 views)
    - It's quite...well...complicated. - kapone 2009-11-04 19:09:04 (9 views)
      - Is this why all young folks will end up with bad hearing in 30 years?? (nt) - Roy In GA 2009-11-05 17:42:22 (3 views)
        
        Nah, that can be attributed to 'Kicker's the $hit..yo' - kapone 2009-11-05 23:36:02 (3 views)
        What? Can you repeat that? I didn't hear you. (nt) - Brian 2009-11-05 19:50:12 (1 views)

MK4 flash dump - damci 2009-11-02 06:07:20 (19 views)
- Check with Autotronic who is on the xoutpost forum. (nt) - Roy In GA 2009-11-02 18:43:37 (14 views)

Low Volume on Nav - jdperformance 2009-11-02 10:19:53 (12 views)

general question on language and region switch - cabomit 2009-11-01 10:56:55 (15 views)
- Yes, I just did this on the MK4 I bought. It was set to - mouser 2009-11-01 15:55:08 (20 views)
  - Re: Yes, I just did this on the MK4 I bought. It was set to - cabomit 2009-11-01 19:38:47 (12 views)
    - I should have expanded on my answer. This is what you'll (url) - mouser 2009-11-01 21:03:47 (13 views)
      - I dont know if the Nav computer supports Chinese language, do you need it to ? (nt) - mouser 2009-11-01 21:57:35 (7 views)

MK I Blank Screen - greasemonkeyfreak 2009-10-24 18:24:52 (47 views)
- Hey Greg....if you're interested, I've got a 4:3 display... (pic) - Tim G in Central NJ 2009-10-26 06:49:35 (35 views)
  - Re: Hey Greg....if you're interested, I've got a 4:3 display... - greasemonkeyfreak 2009-10-31 17:01:44 (19 views)
    - The MKI nav & TV module will work with any 4:3 display - Brian 2009-11-01 10:13:30 (12 views)
      - Thanks for chiming-in, Brian (nt) - Tim G in Central NJ 2009-11-01 20:16:59 (11 views)
    - Hmmm...I was under the impression that the displays.... - Tim G in Central NJ 2009-11-01 08:22:44 (11 views)
- It may be your display screen. My small screen display died back - Roy In GA 2009-10-24 23:43:17 (23 views)

My e38 Mark 3 Navigation computer drains battery in a week. Please help. - mmihailov 2009-09-11 13:35:59 (141 views)
- You nav likely has water damage - kiwijochen 2009-10-31 05:08:23 (14 views)
- Try downgrading and the re-updating the nav computer OS - Brian 2009-09-11 18:09:44 (156 views)
  - Re: Try downgrading and the re-updating the nav computer OS - mmihailov 2009-09-11 19:17:10 (127 views)
    - Re: Try downgrading and the re-updating the nav computer OS - mmihailov 2009-09-13 20:35:53 (104 views)
      - Here's a working link to V32. However, it sounds like you've (url) - mouser 2009-10-30 00:37:51 (25 views)
      - The V22 release disk is the latest for the MKIII (url) - Brian 2009-09-18 07:26:39 (120 views)
        
        Re: The V22 release disk is the latest for the MKIII - robfrankson 2009-10-29 19:52:14 (19 views)

Dealer stated I needed a new nav.....Brian? - aceoffone 2009-10-30 11:18:25 (30 views)
- What year & model car do you have, what nav computer version, etc... - Brian 2009-10-30 14:00:23 (23 views)
  - Re: What year & model car do you have, what nav computer version, etc... - aceoffone 2009-10-30 14:22:38 (26 views)
    - You have a NAVI02 navigation computer - Brian 2009-10-30 14:56:21 (24 views)
      - Re: You have a NAVI02 navigation computer - aceoffone 2009-10-30 15:20:04 (17 views)
        
        You can get them from eBay or other used sources... (url) - Brian 2009-10-30 15:47:05 (22 views)
        
        Brian, does the MOST bus still work with the nav removed or do you have to put - Roy In GA 2009-10-30 18:00:11 (17 views)
        
        If you break the Ring, the MOST - kiwijochen 2009-10-31 04:56:55 (11 views)

OS Update will not load in MkII - banjopilot 2009-10-29 06:38:13 (31 views)
- Getting a BMW original like Roy suggests might be the best ideal but - mouser 2009-10-29 20:28:55 (19 views)
  - Re: Getting a BMW original like Roy suggests might be the best ideal but - banjopilot 2009-10-30 05:21:35 (19 views)
    - If you're trying to reload the same OS version then it wont do anything. It'll - mouser 2009-10-30 14:24:23 (18 views)
      - I live in Midtown and we could try to load and old OS and then a newer OS to see - Roy In GA 2009-10-30 17:48:49 (14 views)
- I don't know but if you think it may be your disk then buy an original - Roy In GA 2009-10-29 11:45:29 (16 views)

DSP amp - recode to Analog CD Changer input instead of digital coax - wala0003 2009-10-28 11:43:57 (22 views)
- This is not a coding change-- it is the radio's control of the DSP amp... - Brian 2009-10-29 08:07:00 (27 views)
  - Re: This is not a coding change-- it is the radio's control of the DSP amp... - wala0003 2009-10-30 01:09:02 (25 views)
    - You will be happy with your CD53 purchase - Brian 2009-10-30 06:55:51 (18 views)

unlocking TV tuner - johndddd 2009-10-27 17:57:50 (48 views)
- Navcoder does it. You can't get digital TV in the car in the US though. (nt) - Roy In GA 2009-10-28 17:01:47 (32 views)
  - Re: Navcoder does it. You can't get digital TV in the car in the US though. - johndddd 2009-10-28 19:24:27 (39 views)
    - Re: Navcoder does it. You can't get digital TV in the car in the US though. - johndddd 2009-10-29 10:44:01 (23 views)
    - I've tried to make NavCoder easy to use - kiwijochen 2009-10-29 02:28:03 (28 views)
    - You'll need an interface, either make one for $10 or buy one from (url) - mouser 2009-10-28 20:54:59 (40 views)
      - Re: You'll need an interface, either make one for $10 or buy one from - johndddd 2009-10-29 09:31:03 (19 views)
        
        Re: You'll need an interface, either make one for $10 or buy one from - johndddd 2009-10-29 09:41:50 (24 views)
      - Here is mine. (url) - Roy In GA 2009-10-28 21:48:22 (30 views)

'recerr' message - mckellar 2009-10-27 11:25:50 (33 views)
- Re: 'recerr' message - mckellar 2009-10-28 12:13:39 (14 views)
- Re: 'recerr' message - kiwijochen 2009-10-27 15:03:51 (28 views)
  - Re: 'recerr' message - mckellar 2009-10-28 09:11:32 (18 views)
  - Re: 'recerr' message - mckellar 2009-10-27 15:42:33 (16 views)
    - changing receiver is very DIY - kiwijochen 2009-10-28 04:19:48 (23 views)
    - No it is a different part. I see them sometimes on ebay pretty cheap. Pretty - Roy In GA 2009-10-27 17:27:20 (25 views)

BMW TV tuner - johndddd 2009-10-27 14:08:03 (54 views)
- Just change the settings - kiwijochen 2009-10-27 15:02:59 (42 views)
  - Re: Just change the settings - johndddd 2009-10-27 15:07:42 (33 views)
    - Re: Just change the settings - johndddd 2009-10-27 16:45:53 (27 views)

Loss of SES voice prompts - Tim G in Central NJ 2009-10-27 07:19:59 (23 views)
- Disconnect intravee - kiwijochen 2009-10-27 15:04:58 (31 views)
  - Thanks Kiwi....will do and report back (nt) - Tim G in Central NJ 2009-10-27 15:41:43 (20 views)

Nav and AV Help/Advise - 00titaniumm5 2009-10-15 23:24:40 (72 views)
- I would check the GPS antenna and antenna cable first... (url) - Brian 2009-10-16 07:05:10 (56 views)
  - Re: I would check the GPS antenna and antenna cable first... - mckellar 2009-10-27 09:59:26 (18 views)
  - Re: I would check the GPS antenna and antenna cable first... - 00titaniumm5 2009-10-16 08:11:53 (49 views)

Problem with Navcoder - mouser 2009-10-21 22:55:33 (53 views)
- Why not talk to me? - kiwijochen 2009-10-22 18:25:31 (33 views)
  - Kiwi, I did a voltage check and noticed I was getting just 11.82v - mouser 2009-10-22 20:32:46 (35 views)
    - That'll be fine - kiwijochen 2009-10-23 02:22:45 (35 views)
      - I built one using the 'Simple Interface 2' schematic found on - mouser 2009-10-23 23:01:30 (19 views)

Nav Radio Removal - dadrmk 2009-10-23 21:24:38 (42 views)

NavCoder... how-to ? - dane 2009-10-21 03:48:37 (139 views)
- TV must be off for 15min - kiwijochen 2009-10-21 14:25:08 (47 views)
  - I got the TV part working - dane 2009-10-21 15:21:35 (45 views)
    - answers - kiwijochen 2009-10-21 16:18:49 (58 views)
      - Re: answers - dane 2009-10-21 16:32:39 (37 views)
- You ought to email kiwijochen with the questions... - Brian 2009-10-21 07:08:28 (41 views)

Black screen e39 03 - ninja68 2009-10-14 02:12:14 (89 views)
- Dig that MK3 back out of thew trash and list it in the For Sale - mouser 2009-10-20 11:42:51 (61 views)
- answers... - kiwijochen 2009-10-14 16:10:46 (82 views)
  - Kiwi - every day i learn something from you... - rex120 2009-10-19 04:59:45 (48 views)
    - Yes, TV does everything. - kiwijochen 2009-10-19 08:55:02 (44 views)
      - Wow, that's cool I want a TV tuner now (nt) - rex120 2009-10-20 01:39:46 (44 views)
  - Re: answers... - ninja68 2009-10-14 16:27:01 (46 views)

To be or not to be MKIV or MKIII... (pic) - drsteve 2009-10-18 20:56:34 (112 views)
- Here are the function and feature comparisons (url) - Brian 2009-10-20 08:51:11 (88 views)
- Here's the full detail.. - kiwijochen 2009-10-20 00:48:50 (59 views)
- A late model MKIII is good, moving map, split screen. About 300 to 350 should - Roy In GA 2009-10-19 22:04:11 (52 views)
- drsteve, MK4 is a DVD based system therefore you - mouser 2009-10-18 22:08:04 (63 views)
  - there is one more advantage to MK4 vs MK3... - rex120 2009-10-19 04:56:37 (55 views)
    - Rex, read the recent comments on bimmernav on the BT forum!!! (nt) - Roy In GA 2009-10-20 00:15:51 (32 views)
      - Re: Rex, read the recent comments on bimmernav on the BT forum!!! - rex120 2009-10-20 05:07:35 (26 views)
    - Thanks for the info and advice. Now I just have to save $ (nt) - drsteve 2009-10-19 14:54:12 (22 views)

Anyone in the NY area that can code a car for navigation? - 95seven40 2009-10-19 16:04:57 (46 views)

Problem with MK4 HELP (pic) - mouser 2009-10-08 13:42:10 (172 views)
- Confirm what you have - kiwijochen 2009-10-18 13:08:26 (35 views)
  - Kiwi, in one of my posts I explained that I couldnt tell (pic) - mouser 2009-10-18 14:27:34 (52 views)
    - Finally a little SUCCESS !! I reburned a V23 downgrade - mouser 2009-10-18 17:57:12 (37 views)
      - It's gonna ask for the OS cd on the language recode btw... - rex120 2009-10-18 19:13:30 (40 views)
        
        Yes, any verssion OS - kiwijochen 2009-10-19 01:49:16 (24 views)
        When it asks, do I just give it the V23 disk again ?? (nt) - mouser 2009-10-18 21:22:26 (36 views)
        
        Sure, it should work if the CD is ok - rex120 2009-10-19 04:45:21 (29 views)
- Since when a re-code of OS changes languages??? - rex120 2009-10-18 06:07:54 (37 views)
  - Ship the unit to me and I'll try to get it fixed for you - if I can't do it - rex120 2009-10-18 06:17:22 (44 views)
- Check for English on the Settings menu. If not, then dealer coding or NavCoder - Brian 2009-10-08 13:51:37 (57 views)
  - Brian, I actually looked in the settings menu and didnt see it - mouser 2009-10-08 14:41:47 (54 views)
    - Language selection is on the main (normal) settings screen - Brian 2009-10-08 15:25:37 (64 views)
      - Ok, I found the word 'idioma' on the first screen and that translates to - mouser 2009-10-08 15:45:05 (58 views)
        
        GB is English, GB style - Brian 2009-10-08 15:51:51 (58 views)
        
        Brian, thanks buddy. I'll try the turn the car off and back on - mouser 2009-10-08 23:17:30 (69 views)
        
        Reload standard V32 OS - kiwijochen 2009-10-09 00:41:22 (55 views)
        
        Brian / Kiwijochen in order to reload the standard V32 os - mouser 2009-10-09 17:16:55 (63 views)
        
        You will have to downgrade and then upgrade... - Brian 2009-10-13 06:58:47 (45 views)
        
        Thanks Brian. I'll downgrade my OS, use navcoder and then upgrade the OS (nt) - mouser 2009-10-13 22:01:35 (40 views)
        
        Tried loading a V25 disk to downgrade the OS and the nav did - mouser 2009-10-15 19:57:04 (29 views)
        
        You can get some older versions here... (url) - Brian 2009-10-15 22:15:37 (51 views)
        
        You know, I tried those links the other day and they were dead The - mouser 2009-10-15 22:38:34 (40 views)
        
        Tried to install a V23 disk and the nav puter did nothing, nothing - mouser 2009-10-17 18:10:25 (38 views)
        
        Try on a DVD - kiwijochen 2009-10-18 00:17:19 (33 views)
        
        Kiwi, it seems to read my navteq Nav CD ok though. Any other - mouser 2009-10-18 00:48:53 (28 views)
        
        I wonder if it is a Range Rover nav computer? - Brian 2009-10-18 09:22:21 (38 views)
        
        No, it has BMW stickers and part number on it. I went to try and - mouser 2009-10-18 14:09:35 (30 views)

Now I am out of ideas... - buellxb 2009-10-17 02:03:55 (49 views)
- LCD backlight failling - kiwijochen 2009-10-18 13:10:02 (40 views)
- by the way, it's a 2002 X5 4.4 - buellxb 2009-10-17 02:09:27 (47 views)

CD Changer stop working - dubsmk2 2009-10-16 14:10:20 (53 views)
- Check ibus connection to CD changer - kiwijochen 2009-10-18 00:20:55 (28 views)

Upgrade Question - 00titaniumm5 2009-10-17 12:15:38 (35 views)
- Unfortunately, there is no OE CD option for the 16:9 screen - Brian 2009-10-17 13:14:32 (39 views)

Update to my backup camera image flickering, issue resolved (pic) (url) - rg0115 2009-10-13 18:59:51 (101 views)
- Glad you can sleep again buddy! (nt) - Edwin™ 2009-10-14 11:28:55 (32 views)
  - You know me to well. I know you would have been hating it too. (nt) - rg0115 2009-10-17 03:22:03 (21 views)

2001 E38 Navigation Harness - 95seven40 2009-10-10 23:11:20 (81 views)
- Re: 2001 E38 Navigation Harness - medic1 2009-10-14 02:09:57 (47 views)
  - Re: 2001 E38 Navigation Harness - 95seven40 2009-10-14 21:18:02 (33 views)
    - Re: 2001 E38 Navigation Harness - medic1 2009-10-15 00:40:10 (39 views)
      - Thanks! I remember reading a post about that, I have to look - 95seven40 2009-10-16 12:49:39 (24 views)

How do you remove the Accept Screen on the nav? I've forgotten (nt) - Ed 2009-10-12 19:40:55 (80 views)
- On MK3, after upgrading from v17 to v25, I lost - gene123 2009-10-14 01:38:33 (51 views)
  - What happened when you put the CDs in? My car has never taken to them - Ed 2009-10-14 19:42:40 (39 views)
    - Meant 'lose' (nt) - Ed 2009-10-16 00:06:12 (20 views)
    - I burned v17.1 CD and it just took it and started the - gene123 2009-10-15 03:18:49 (33 views)
      - Do you still have the CDs? Can I pay shipping to borrow? (nt) - Ed 2009-10-16 00:06:56 (22 views)
        
        I think so. You know you can just burn it. I have the link - gene123 2009-10-16 00:58:13 (37 views)
- NavCoder (nt) - Brian 2009-10-12 20:47:13 (54 views)
  - I'll mail it to ya! I may be passing through ATL in Dec. I will have to swing by (nt) - Ed 2009-10-12 21:33:46 (41 views)

Web page address for Navtec - bmw1989i 2009-10-13 11:26:38 (44 views)
- http://www.navteq.com/ (nt) - Brian 2009-10-13 12:08:56 (58 views)
  - Re: http://www.navteq.com/ - bmw1989i 2009-10-15 09:48:33 (42 views)

Upgrade from MKII to MKIV - no Info/Select function (url) - dane 2009-10-04 14:39:40 (133 views)
- Just received the Resler interface and ordered the NavCoder - dane 2009-10-15 09:20:46 (46 views)
- Just received the Resler interface and ordered the NavCoder - dane 2009-10-15 09:20:38 (42 views)
- You have default settings programmed - kiwijochen 2009-10-05 12:19:01 (91 views)
  - Re: You have default settings programmed - dane 2009-10-05 12:34:46 (86 views)
    - Excellent. NavCoder is the best choice. - Brian 2009-10-05 16:40:14 (89 views)
      - Re: Excellent. NavCoder is the best choice. - dane 2009-10-05 16:44:36 (69 views)
        
        We have another Danish guy on the e38 forum. (nt) - Roy In GA 2009-10-06 01:07:59 (64 views)
        
        We are everywhere - we have good taste in cars! (nt) - dane 2009-10-06 02:42:54 (63 views)
- Your nav needs to be initialized to your screen and radio (url) - Brian 2009-10-04 20:01:01 (142 views)
  - Re: Your nav needs to be initialized to your screen and radio - dane 2009-10-05 09:59:17 (57 views)
  - Re: Your nav needs to be initialized to your screen and radio - dane 2009-10-05 02:07:10 (62 views)

No AM in BM 53 Install - Hank 2009-10-11 15:07:29 (62 views)
- How to get to radio service mode (url) - Brian 2009-10-13 06:53:13 (68 views)
  - Re: How to get to radio service mode - Hank 2009-10-13 12:56:17 (38 views)
    - Battery disconnect is not necessary... - Brian 2009-10-13 13:09:22 (46 views)
      - Re: Battery disconnect is not necessary... - Hank 2009-10-14 12:48:43 (37 views)
- I don't think that the way to set radio service mode!!! - Lyonsden1980 2009-10-11 18:27:55 (48 views)

X5 2004 Nav losing satellites - yellowbird172 2009-10-14 02:36:18 (40 views)
- Could be a few things... (url) - Brian 2009-10-14 07:06:37 (44 views)

All you guys that are using CCD backup camera, r u experiencing image flickering (pic) (vid) (url) - rg0115 2009-10-02 18:53:42 (139 views)
- Issue resolved, see additional post. Don't ask why that fixed it, it just did. (url) - rg0115 2009-10-13 19:02:14 (37 views)
- More often than not, it's a grounding issue. - kapone 2009-10-03 18:33:17 (47 views)
  - I did not look at that angel yet. I have both the camera and the NavTv unit - rg0115 2009-10-04 13:34:56 (30 views)
    - I think the Nav-TV unit's video input may be an isolated ground... - kapone 2009-10-04 14:01:45 (42 views)
      - I can try that, but wouldn't the fido from the iPod flicker too, that video is - rg0115 2009-10-04 15:18:52 (39 views)
        
        Wait...video from your iPod going to the NavTV unit seems fine? - kapone 2009-10-04 17:11:31 (21 views)
        
        Update on my troubleshooting. These are the additional test I ran without - rg0115 2009-10-05 00:56:43 (38 views)
        
        It does look like that. See what the Nav-TV guys say. - kapone 2009-10-05 07:59:38 (15 views)
    - Most any brown wire is a ground wire. You could always tap into - sealbeach740 2009-10-04 14:01:20 (35 views)
- I have a CCD camera, and the image is rock solid - Brian 2009-10-03 06:49:50 (35 views)
  - Brian, what CCD camera are you using? I also think its the camera. (nt) - rg0115 2009-10-03 12:26:17 (54 views)
    - I have the Misumi MS-DC54 - Brian 2009-10-03 13:34:52 (29 views)
- Euro cars with the TV module do not flicker, I'll make a video when I get home (nt) - Edwin™ 2009-10-02 22:39:20 (36 views)
  - Thanks Edwin. I checked the pixels on the CMOS vs. CCD and they are both the - rg0115 2009-10-02 23:50:39 (43 views)
    - Euro cars can only have NTSC cams to work on the TV module (nt) - Edwin™ 2009-10-03 09:01:50 (44 views)
    - One more thing, the CMOS camera has 380 TV lines vs. 420 for CCD. does that make - rg0115 2009-10-02 23:53:24 (25 views)
      - It shouldn't. My CCD has 420 lines as well, and no flickering. (nt) - kapone 2009-10-03 18:34:06 (32 views)
- In other applications, I've noticed image flicker on cameras when the power - DavidC 2009-10-02 20:01:26 (39 views)
  - I thought of that as well. I used direct 12v power from a plug in the wall and - rg0115 2009-10-02 20:38:16 (44 views)
    - No go on the video amp. I was hoping that would do the trick. Darn it. This is (pic) (url) - rg0115 2009-10-02 21:31:46 (70 views)

First conceptual model of the amp rack! (pic) - kapone 2009-10-09 22:26:34 (230 views)
- Here's sorta the whole nine yards...with the top and front panels.. (pic) - kapone 2009-10-12 19:04:45 (88 views)
  - Here's different views once things are closed up. (pic) - kapone 2009-10-12 20:54:53 (69 views)
    - I admire you sense of planning. What are you using to draft up your concept - rg0115 2009-10-12 21:24:40 (27 views)
      - Google Sketchup. (nt) - kapone 2009-10-12 21:43:10 (22 views)
    - So....watcha think guys??? - kapone 2009-10-12 21:10:57 (36 views)
  - you're having way too much fun with that CAD program (nt) - sdmike 2009-10-12 19:41:35 (20 views)
    - Not CAD, Google Sketchup... It's real nice. - kapone 2009-10-12 19:50:05 (28 views)
- Where do you vent the heat? (nt) - sdmike 2009-10-10 16:50:56 (39 views)
  - Ah...somebody caught on.... - kapone 2009-10-10 18:32:53 (33 views)
    - you may consider using 12v PC case fans. YOu can get them dead quiet (nt) - sdmike 2009-10-10 22:55:44 (25 views)
      - I sure am, I have boxes full of them sitting around. - kapone 2009-10-10 23:42:53 (27 views)
        
        Well, I say 'heat kills' and better safe than sorry. (nt) - sdmike 2009-10-12 19:37:40 (16 views)
- Cool! Looks like a Professional Job from West Coast Customs/Unique Auto!! (nt) - HighLine740iL 2009-10-10 14:13:13 (20 views)

E32 Radio / XM Input Options - ov735i 2009-10-12 11:02:30 (32 views)

TVonNav - no Audio - gene123 2009-10-07 14:55:48 (89 views)
- Re: TVonNav - no Audio - Lyonsden1980 2009-10-08 21:40:34 (67 views)
  - Re: TVonNav - no Audio (pic) - gene123 2009-10-08 23:32:08 (82 views)
    - The insructions refer to the radio tuner, not the amp - kiwijochen 2009-10-09 00:38:45 (47 views)
      - so, do I need to run those 2 wires to the radio or can I - gene123 2009-10-09 02:29:04 (61 views)
        
        You must connect to radio - kiwijochen 2009-10-09 14:35:01 (65 views)
        
        Thank you! (nt) - gene123 2009-10-09 20:29:15 (33 views)
      - Oh, OK. Where is it located on an E38? - gene123 2009-10-09 01:18:00 (47 views)
      - Oh, OK. Where is it located on an E38? - gene123 2009-10-09 01:17:59 (41 views)

Help with Basslink mounting. Any pictures greatly appreciated. (nt) - HighLine740iL 2009-10-07 21:50:22 (47 views)
- Is this the Basslink you guys have? (url) - stingley 2009-10-09 14:22:15 (42 views)
  - yep! Best mod I've made to my car, bar none (nt) - sdmike 2009-10-09 15:23:10 (27 views)
    - Dropped the hint to the wife today it might be a good X-Mas present! :-) (nt) - stingley 2009-10-09 17:30:07 (18 views)
- Here's mine (pic) - sdmike 2009-10-08 01:48:05 (161 views)
  - where did you put your remote controller? (nt) - AL 2009-10-09 00:06:30 (22 views)
    - Don't have one. I have an originail basslink without the remote (nt) - sdmike 2009-10-09 00:34:49 (29 views)
  - great pic, man,.... - steeltag 2009-10-08 22:24:14 (34 views)
    - Thanks. She cleans up nicely. Unfortunately it's embarassingly dirty now (nt) - sdmike 2009-10-08 23:48:52 (32 views)
  - Thanks, Mike! I wish that I could have lunch w/you & Simeon et al during your - HighLine740iL 2009-10-08 09:54:08 (39 views)
    - The brackets are screwed to the sheet metal of the trunk. - sdmike 2009-10-08 23:49:53 (13 views)
- Here's where my Basslink is mounted.... (pic) - sealbeach740 2009-10-08 01:02:23 (130 views)
  - Thank you Sealbeach740, how did you mount it up there? - HighLine740iL 2009-10-08 09:55:32 (36 views)
    - Build an MDF panel that is slightly bigger than the bottom - kapone 2009-10-08 10:24:13 (34 views)
      - Or, I just used cardboard as a template for the Basslink mounting holes, - sealbeach740 2009-10-09 00:00:08 (29 views)
        
        Sure, that will work too. My only reason for MDF was to reduce any rattles. :-) (nt) - kapone 2009-10-09 11:13:34 (16 views)
        My Basslink remote is up front in the cabin, under my wood - sealbeach740 2009-10-09 02:02:14 (25 views)
        
        he said ''under my wood'' (nt) - sdmike 2009-10-09 17:02:46 (40 views)
        
        LOL!!! (nt) - HighLine740iL 2009-10-09 20:01:44 (35 views)

Nav/Audio System Inop - ralamon7 2009-10-09 15:37:57 (51 views)

Z4 Navigation system - malcs 2009-10-07 13:50:49 (73 views)
- Re: Z4 Navigation system - malcs 2009-10-08 10:23:19 (54 views)
  - What do you want to know? - kiwijochen 2009-10-08 11:45:06 (59 views)
- For the Z4 you must use the Mk4 nav - kiwijochen 2009-10-08 03:58:35 (67 views)
  - Will it have to be coded for radio nav or find one already coded that way? (nt) - Roy In GA 2009-10-08 21:07:56 (39 views)
    - Either or - kiwijochen 2009-10-09 14:41:08 (55 views)

widescreen monitor in pre 9/01 e46 - bmpower 2009-10-07 18:52:05 (51 views)
- I believe that the retrofit is the same for all e46 model years (nt) - Brian 2009-10-07 19:44:23 (44 views)
  - Re: I believe that the retrofit is the same for all e46 model years - bmpower 2009-10-07 22:15:08 (47 views)
    - You have to replace the main wiring harness anyway - Brian 2009-10-08 06:32:34 (61 views)
      - Re: You have to replace the main wiring harness anyway - bmpower 2009-10-09 00:39:31 (46 views)

18 pin socket - medic1 2009-09-24 18:10:35 (106 views)
- I have a few of these if anyone is intersted (pic) - LA-Sean 2009-09-25 18:13:01 (168 views)
  - Got some from Sean today. VERY nice and well built - kapone 2009-10-05 16:38:38 (52 views)
    - +1; I bought a couple from Sean and promptly tore them apart. (nt) - Brian 2009-10-05 16:40:59 (53 views)
  - Re: I have a few of these if anyone is intersted - mrworm2 2009-10-02 11:50:09 (51 views)
    - YGM (nt) - LA-Sean 2009-10-08 14:10:08 (50 views)
  - YGM.. (nt) - kapone 2009-09-26 13:07:39 (80 views)
    - Replied. thanks. (nt) - LA-Sean 2009-09-26 16:02:14 (51 views)
- Are you talking about the Blue or Maroon one? - Lyonsden1980 2009-09-24 20:12:09 (65 views)
  - Re: Are you talking about the Blue or Maroon one? - medic1 2009-09-24 21:53:13 (66 views)
    - Re: Are you talking about the Blue or Maroon one? - Lyonsden1980 2009-09-24 23:58:23 (69 views)
      - Re: Are you talking about the Blue or Maroon one? - mrworm2 2009-10-02 11:39:22 (47 views)
        
        Re: Are you talking about the Blue or Maroon one? - mrworm2 2009-10-02 11:47:36 (52 views)
      - Part numbers - medic1 2009-09-25 03:05:38 (83 views)
      - Where do you buy these since they are not in the dealers master ETK file? (nt) - Roy In GA 2009-09-25 00:42:59 (63 views)
        
        Re: Where do you buy these since they are not in the dealers master ETK file? - medic1 2009-09-25 03:10:35 (75 views)

TIS for 2004 745LI - viceinc 2009-10-08 10:33:27 (45 views)

Replacing Door Speakers with Component Speakers - redassag00 2009-10-07 17:35:01 (53 views)
- Your amp has a built-in active crossover, so no need for crossovers - Brian 2009-10-07 19:42:00 (72 views)
  - Brian, Thanks so much for the quick - redassag00 2009-10-07 23:53:29 (56 views)
    - You have DSP. - Brian 2009-10-08 06:34:56 (31 views)
      - Thanks - redassag00 2009-10-08 09:31:21 (34 views)

Trap circuit - medic1 2009-10-05 20:11:43 (47 views)
- No need to change Trap Circuit - kiwijochen 2009-10-06 16:23:31 (44 views)

A Pin out of connector X1313- use at your own risk! - medic1 2009-10-05 21:03:14 (68 views)
- Answers are easy - kiwijochen 2009-10-06 16:21:49 (78 views)

retrofit question - dubsmk2 2009-10-02 11:19:24 (88 views)
- Fixable with recoding - kiwijochen 2009-10-02 14:40:52 (73 views)
  - Re: Fixable with recoding - dubsmk2 2009-10-02 16:24:33 (54 views)
    - Plug in the BMW GT1 software - kiwijochen 2009-10-04 01:14:57 (75 views)
      - Anyone with GT1? - medic1 2009-10-05 23:54:41 (39 views)

Advice on Radio Upgrade(s) - 2001 E39 - ov735i 2009-10-03 21:33:38 (105 views)
- You can do most of it with factory parts... - Brian 2009-10-05 17:18:40 (60 views)
  - Re: You can do most of it with factory parts... - ov735i 2009-10-05 21:43:34 (66 views)

Navigation Issues - mani911 2009-10-04 21:52:00 (64 views)
- I have not read anything like this before - Brian 2009-10-05 16:43:53 (57 views)

antenna amplifier question - medic1 2009-10-03 03:45:34 (65 views)
- Any antenna amp after 2001 is OK - kiwijochen 2009-10-04 00:49:49 (67 views)
  - Re: Any antenna amp after 2001 is OK - medic1 2009-10-04 04:05:09 (54 views)
    - The 082 is the one from an e39. Jochen, will one from an X5 work and fit an e38? (nt) - Roy In GA 2009-10-04 23:21:18 (41 views)

radio upgrade lose DSP ? - robertengels 2009-10-02 10:59:19 (63 views)
- Radio upgrades do not lose DSP... - Brian 2009-10-02 21:18:54 (51 views)

on board monitor without navigation? - robertengels 2009-10-02 11:06:08 (84 views)
- It's like your home PC - kiwijochen 2009-10-02 14:38:58 (89 views)
  - Re: It's like your home PC - robertengels 2009-10-02 15:02:13 (95 views)
    - Re: It's like your home PC - robertengels 2009-10-02 15:08:51 (71 views)
  - No, but if he gets the TV tuner, he can drive all the necessary graphics - Lyonsden1980 2009-10-02 14:47:59 (72 views)
    - Re: No, but if he gets the TV tuner, he can drive all the necessary graphics - robertengels 2009-10-02 15:18:27 (50 views)
      - Just get the MKIV DVD GPS NAVIGATION SYSTEM ! (nt) - 95seven40 2009-10-02 20:50:17 (86 views)

Nav interface harness - medic1 2009-09-23 23:39:58 (118 views)
- Here's the Mk3 connections: (nt) - kiwijochen 2009-09-24 02:31:20 (142 views)
  - Once more with details - kiwijochen 2009-09-24 02:41:54 (91 views)
    - Re: Once more with details - medic1 2009-09-24 04:09:57 (67 views)
      - Re: Once more with details - medic1 2009-09-24 04:23:52 (60 views)
        
        Correction to harness: nav pin 17 connects to sub pin2 - medic1 2009-09-24 04:35:29 (80 views)
        Re: Once more with details - medic1 2009-09-24 04:27:44 (70 views)
        
        Re: Once more with details - mrworm2 2009-10-02 11:31:07 (60 views)

Martin, why am I seeing Alpine KCA-420i iPod adapters FS so cheap? - Tim G in Central NJ 2009-09-18 10:04:20 (142 views)
- Re: Martin, why am I seeing Alpine KCA-420i iPod adapters FS so cheap? - prof330i 2009-09-21 12:43:44 (97 views)
- Re: Martin, why am I seeing Alpine KCA-420i iPod adapters FS so cheap? (url) - richardp 2009-09-19 02:47:47 (141 views)
  - UPDATE: Do any other alternatives to the KCA-420i converter exist? - Tim G in Central NJ 2009-09-25 12:11:32 (92 views)
    - Re: UPDATE: Do any other alternatives to the KCA-420i converter exist? - richardp 2009-09-30 12:30:40 (65 views)
      - Hey Richard.....you're right....definitely some confusion here.... - Tim G in Central NJ 2009-10-01 08:37:49 (60 views)
        
        Re: Hey Richard.....you're right....definitely some confusion here.... - richardp 2009-10-01 09:56:14 (57 views)
        
        Thanks for all the help Richard....I've located a D/A converter... (url) - Tim G in Central NJ 2009-10-01 13:42:11 (55 views)
        
        What do you mean ''Appears''. Hell yes it will work! :o) (nt) - bghark 2009-10-01 15:19:19 (56 views)
        
        Haha! Let's hope so, brother....let's hope so....! ;o) (nt) - Tim G in Central NJ 2009-10-01 15:24:50 (52 views)
  - Thank you both for the information...now it makes total sense... - Tim G in Central NJ 2009-09-22 15:34:59 (88 views)
- ...sorry...meant 'Martin or Brian, etc' :o) (nt) - Tim G in Central NJ 2009-09-18 10:06:02 (110 views)

DSP AMP PART NO. 65.12-8 352 296? - 95seven40 2009-09-29 21:22:02 (62 views)
- Like I said when I called you, you need a NEW GEN DSP amp, the OLD phillips DSPs - Lyonsden1980 2009-09-30 02:12:05 (78 views)
  - Actually this is the one in my car he he! - 95seven40 2009-09-30 02:25:31 (65 views)
    - These will work... Also if you get one already coded for NAV, (url) - Lyonsden1980 2009-09-30 02:33:39 (59 views)

MK3 must need new antenna. It is stuck in Austin TX where - JoeC 98 740il & 750il 2009-09-28 23:37:26 (71 views)
- Confirm the fault first - kiwijochen 2009-09-29 03:51:50 (71 views)

DSP 26 pin (X18773) connector part number... - kapone 2009-09-27 12:08:02 (83 views)
- Outside BMW 8 373 602/Siemens B1026-Y240. Inside BMW 8 373 618/ Siemens - Roy In GA 2009-09-28 02:20:22 (45 views)
  - My Black coded plug is the 602/618 combination but here is the uncoded one #10. (url) - Roy In GA 2009-09-28 02:29:05 (57 views)
    - Thanks! (nt) - kapone 2009-09-28 09:28:03 (48 views)

BM53 question - kapone 2009-09-26 12:47:30 (91 views)
- Range Rover BM53's DON'T SUPPORT AUX, SAT RADIO and etc. (nt) - Lyonsden1980 2009-09-27 18:30:12 (66 views)
- Saw your post on the E38 board.. - Brian 2009-09-26 20:10:10 (66 views)
  - Yeah...I'm starting to suspect as much. - kapone 2009-09-26 23:51:38 (61 views)
    - Not that hard to find our - kiwijochen 2009-09-27 13:31:25 (76 views)
      - lol...I wish it were that easy.... - kapone 2009-09-27 13:39:29 (70 views)

Mk 4 Nav light not turning on. DSP no available option. - streifen 2009-09-27 15:07:19 (77 views)

After an Uneventful Summer MKIII appears dead - kenez 2009-09-20 21:59:30 (79 views)
- Yep, that sounds dead (url) - Brian 2009-09-21 07:23:44 (107 views)
  - Re: Yep, that sounds dead - musiccity 2009-09-24 16:49:25 (62 views)
    - He still has it. I will PM you his contact information. (nt) - Brian 2009-09-24 21:01:10 (51 views)
      - There is also one for sale in the For Sale section. (nt) - Roy In GA 2009-09-25 00:34:58 (82 views)

problem - from DSP to non-DSP - spacepl 2009-09-21 17:27:18 (89 views)
- Re: problem - from DSP to non-DSP - spacepl 2009-09-22 08:14:57 (68 views)
  - Re: problem - from DSP to non-DSP - spacepl 2009-09-24 17:35:16 (63 views)
    - I guess the Code for the DSP was still in the memory? (nt) - 95seven40 2009-09-24 17:45:46 (56 views)
      - Re: I guess the Code for the DSP was still in the memory? - spacepl 2009-09-24 18:33:15 (49 views)

Thanks Mouser - medic1 2009-09-22 02:21:05 (62 views)
- No sweat bud, glad it worked out for you (nt) - mouser 2009-09-23 22:24:11 (54 views)
  - Re: No sweat bud, glad it worked out for you - medic1 2009-09-23 23:32:43 (71 views)

i couldn't find it on search but do i have to remove - paprmkr 2009-09-23 17:22:54 (62 views)
- Yes, it just snaps off and on. I remember asking same question when - mouser 2009-09-23 22:20:34 (64 views)
  - To expand on your question, I dont think you need to remove it as its - mouser 2009-09-23 22:21:53 (66 views)

Does the part number on the MKIV computer matter? - 95seven40 2009-09-22 12:43:07 (90 views)
- We have not identified any hardware differences in the MKIV part numbers... - Brian 2009-09-22 13:13:08 (86 views)
  - I may have one very cheap from my local salvage yard. - 95seven40 2009-09-22 13:50:19 (91 views)
    - Should had left a deposit on the MK4! , they sold it on me. ;( . (nt) - 95seven40 2009-09-23 18:31:49 (89 views)

Proposed Nav Interface Harness diagram - medic1 2009-09-23 02:08:41 (89 views)
- Re: Proposed Nav Interface Harness diagram - medic1 2009-09-23 02:16:42 (95 views)
  - Re: Proposed Nav Interface Harness diagram - medic1 2009-09-23 02:17:26 (68 views)

aftermarket setup for my E38 - paprmkr 2009-09-16 20:11:21 (133 views)
- For what it's worth, my personal opinion is that touchscreens are overrated.. - kapone 2009-09-20 23:30:31 (78 views)
  - Re: I agree and thats why I only flip the screen out when I need NAV function - TonyB 2009-09-21 00:24:12 (92 views)
- Remember what you'll loose - kiwijochen 2009-09-17 04:03:56 (116 views)
  - Re: Remember what you'll loose - paprmkr 2009-09-20 15:27:06 (69 views)
    - To play video on screen: - kiwijochen 2009-09-23 01:41:55 (104 views)
- Re: here is what I did for consideration.It has NAV, USB, SD , etc, etc. (pic) - TonyB 2009-09-16 22:21:53 (177 views)
  - Me too with add-ons (pic) - Rogue7 2009-09-23 01:10:45 (116 views)

DIY component to rgb converter - medic1 2009-09-22 21:45:14 (95 views)
- Link to circuit - medic1 2009-09-22 21:48:42 (119 views)

Video module - medic1 2009-09-22 04:33:31 (88 views)
- That won't work at all with your system (url) - Brian 2009-09-22 06:51:07 (125 views)
  - Re: That won't work at all with your system - medic1 2009-09-22 21:13:22 (96 views)

mklll question.. - danny740il 2009-09-22 09:45:34 (111 views)
- Yes and no... - Brian 2009-09-22 10:48:16 (102 views)
  - Re: Yes and no...thanks brian..i will checkit out tonite..... (nt) - danny740il 2009-09-22 12:02:12 (74 views)

Points of interest - medic1 2009-09-21 00:56:46 (89 views)
- Turn them off in the menu - kiwijochen 2009-09-21 02:57:08 (62 views)
  - Re: Turn them off in the menu - medic1 2009-09-22 02:18:49 (59 views)

Navtool / NavTvand audio input - mouser 2009-09-19 17:27:06 (123 views)

MKIII won't accept CD, black screen on display - graydon 2009-09-15 16:22:15 (147 views)
- Your MKIII is probably dead... (url) - Brian 2009-09-17 07:27:52 (105 views)
  - You would have to send it to Germany or Australia to be reflashed if it's dead. (nt) - Roy In GA 2009-09-17 12:08:57 (101 views)
    - Re: You would have to send it to Germany or Australia to be reflashed if it's dead. - graydon 2009-09-17 19:20:40 (83 views)
      - If it is dead, get a MKIV instead - Brian 2009-09-17 20:14:35 (95 views)
        
        I'd like a MKIV but that is $600+ I don't have right now. (nt) - graydon 2009-09-17 22:31:48 (89 views)

where is the best place to buy the round pin to flat pin adapter for - rrse38 2009-09-14 20:14:44 (81 views)
- BMW dealer or www.bimmernav.com (nt) - Brian 2009-09-14 22:23:07 (114 views)

TV module - medic1 2009-09-12 13:36:08 (140 views)
- Easy answers - kiwijochen 2009-09-13 11:44:18 (124 views)
  - Re: Easy answers - medic1 2009-09-14 03:49:25 (106 views)

Has my nav computer lost it's mind?!?!?!? - y2k740il 2009-09-13 22:17:08 (106 views)
- Sounds like your DVD laser is bad. This has/is discussed on the nav forum at - Roy In GA 2009-09-14 01:50:04 (114 views)

Intravee II & Apline 420i & iPhone (url) - Shled℠ 2009-09-12 17:16:15 (142 views)

Tri-Band Sharkfin Antenna? - 95seven40 2009-09-09 00:35:21 (98 views)
- My X3 has at least a GPS and Sirius sharkfin; cell prob not needed these days - pd750 2009-09-10 02:30:04 (91 views)
  - Re: My X3 has at least a GPS and Sirius sharkfin; cell prob not needed these days - medic1 2009-09-12 13:21:50 (87 views)
  - Still a need for external antenna - kiwijochen 2009-09-10 02:39:14 (104 views)
    - I like the external antenna option (pic) - 95seven40 2009-09-10 18:29:18 (140 views)
      - One caveat: Not all cell phones have an external antenna connection - Brian 2009-09-11 07:29:48 (97 views)
        
        According to apple it does have one. (nt) - 95seven40 2009-09-11 13:49:41 (90 views)
      - Re: I like the external antenna option - 95seven40 2009-09-10 18:49:09 (104 views)

Can the screen on the 16x9 be replaced? like with something bighter (nt) - paprmkr 2009-09-07 16:40:54 (121 views)
- Have you adjusted the contrast setting yet ??? (nt) - mouser 2009-09-11 23:45:24 (97 views)
- Re: Can the screen on the 16x9 be replaced? like with something bighter (url) - 95seven40 2009-09-08 21:31:53 (184 views)

Anyone want a partially dead Sirius module to tinker with? - Brian 2009-09-05 10:31:25 (89 views)
- I got first dibs! - 95seven40 2009-09-05 14:54:09 (110 views)
  - It is yours. I will figure out the USPS shipping cost and will follow up (nt) - Brian 2009-09-05 20:25:27 (84 views)
    - Thanks! I use PAYPAL for quick payment. - 95seven40 2009-09-06 10:33:03 (74 views)
      - Shipping, including the PayPal tax is about $9... - Brian 2009-09-06 15:26:25 (89 views)
        
        YGM Re: Shipping, including the PayPal tax is about $9... - 95seven40 2009-09-07 11:36:25 (106 views)
        
        I got it. YGM Back - Brian 2009-09-07 21:21:50 (106 views)

Pages: 1 2 3 4 5 6 7 8 9 10 - Next >>

Post New Message

Home | Privacy Policy | Terms of Service | Glossary | Advertising

Questions, comments, problems, please email webmaster@bimmerboard.com

©Copyright 2003-2009 BimmerBoard, LLC, All Rights Reserved.
No content from this web site may be reproduced or copied in any
form without the express written consent of BimmerBoard, LLC.

The BMW name and logos are registered trademarks of BMW AG
and BMW of North America, LLC.